Date: Sun, 18 Jan 2009 13:20:43 +0100 From: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@FreeBSD.ORG> To: "Conrad J. Sabatier" <conrads@cox.net> Cc: freebsd-current@FreeBSD.ORG Subject: Re: nv-pv2 (Was: I give up) Message-ID: <9AB4BB55-6F88-434D-B2BD-1E00DDCF7A8F@FreeBSD.ORG> In-Reply-To: <20090118050045.39b8ab47@serene.no-ip.org> References: <20090114163846.0dfa6080@serene.no-ip.org> <20090118050045.39b8ab47@serene.no-ip.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 18Jan, 2009, at 12:00 , Conrad J. Sabatier wrote: > On Wed, 14 Jan 2009 16:38:46 -0600 > "Conrad J. Sabatier" <conrads@cox.net> wrote: > >> OK, I took Soren's advice and modified the device ID in one of the >> patches he had originally sent me. The SATA controller is now being >> recognized, as well as the hard drive, but still no CD/DVD. >> >> What else do I need to do to complete this remedy? I've included my >> modifications to Soren's original patches below. >> >> Thank you, and sorry for the long lag in following up on this issue. >> >> Conrad > I should hqve included the output of "ataconf list": > > # atacontrol list > ATA channel 2: (this is the internal hard drive) > Master: ad4 <Hitachi HDS721075KLA330/GK8OA87A> Serial ATA II > Slave: no device present > ATA channel 3: > Master: no device present > Slave: no device present > ATA channel 4: > Master: no device present > Slave: no device present > ATA channel 5: > Master: no device present > Slave: no device present > ATA channel 6: > Master: no device present > Slave: no device present > ATA channel 7: > Master: no device present > Slave: no device present > > So where the heck is my CD/DVD connected to? This is one of the most > bizarre problems I've ever encountered. Pciconf, camcontrol both turn > up equally blank info. I'm quite at a loss here. If the optical device is SATA it might not be detected, the code for =20 SATA ATAPI is still fragile. If its PATA it should be detected.. > > > And what could be the reason for no ATA channels 0 or 1 showing up? Those two devices are reserved for the legacy ports. -S=F8ren=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9AB4BB55-6F88-434D-B2BD-1E00DDCF7A8F>