Date: Fri, 18 Jan 2008 10:17:05 +0900 From: "Hidetoshi Shimokawa" <simokawa@FreeBSD.ORG> To: "Sean Bruno" <sbruno@miralink.com> Cc: freebsd-firewire@freebsd.org Subject: Re: Firewire 800/400 card Message-ID: <626eb4530801171717o16dfe1a2u133566a2f2ff6b5e@mail.gmail.com> In-Reply-To: <478FE159.9020508@miralink.com> References: <478FB36D.3030106@miralink.com> <626eb4530801171416j48e4d7afq26b4b7a9d3be35a8@mail.gmail.com> <478FE159.9020508@miralink.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Then, it is normal. It is still a repeater between S400 and S800 device those are on the same bus. This mean that S800 device needs to talk to S400 devices at 400Mb/s. On Jan 18, 2008 8:14 AM, Sean Bruno <sbruno@miralink.com> wrote: > Hidetoshi Shimokawa wrote: > > Do you have two (S400 only and S800) cards? > > In that case you will have two devices (fwohci0 and fwohci1). > > If you have only one card and have S400 and S800 ports, you will have > > one device and one bus. > > Output of devinfo(8) and fwcontrol -t may be helpful. > > The line "fwohci0: invalid speed 7 (fixed to 3)." is expected. > > > > Regards, > > > > > This is a 400/800 card: http://www.syba.com/Product/Info/Id/411 > > fwcontrol -t: > source # fwcontrol -t > crc_len: 3 generation:3 node_count:1 sid_count:1 > id link gap_cnt speed delay cIRM power port0 port1 port2 ini more > 00 1 5 S800 0 1 -1W - - - 1 0 > > Sean > > > > On Jan 18, 2008 4:58 AM, Sean Bruno <sbruno@miralink.com> wrote: > > > >> I'm curious, I put a 400/800 card into a FreeBSD 6 machine today and I > >> assumed that I would see several different "buses" but I only see one > >> according to camcontrol. Should I see one bus per port or per firewire > >> controller? > >> > >> Also, the card I am using displays interesting output on startup, is > >> this a h/w bug? > >> > >> > >> fwohci0: <Texas Instruments TSB82AA2> mem > >> 0x2a109000-0x2a1097ff,0x2a100000-0x2a103fff irq 17 at device 6.0 on pci0 > >> fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0x2a109000 > >> fwohci0: [MPSAFE] > >> fwohci0: OHCI version 1.10 (ROM=1) > >> fwohci0: No. of Isochronous channels is 4. > >> fwohci0: EUI64 00:13:3b:01:00:01:00:58 > >> fwohci0: invalid speed 7 (fixed to 3). > >> fwohci0: Phy 1394a available S800, 3 ports. > >> fwohci0: Link S800, max_rec 4096 bytes. > >> firewire0: <IEEE1394(FireWire) bus> on fwohci0 > >> > >> > >> Sean > >> > >> _______________________________________________ > >> freebsd-firewire@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-firewire > >> To unsubscribe, send any mail to "freebsd-firewire-unsubscribe@freebsd.org" > >> > >> > >> > > > > > > > > > > -- /\ Hidetoshi Shimokawa \/ simokawa@FreeBSD.ORG
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?626eb4530801171717o16dfe1a2u133566a2f2ff6b5e>