Date: Sun, 11 Apr 2010 19:20:59 +0200 From: Christof Schulze <christof.schulze@gmx.com> To: freebsd-stable@freebsd.org Subject: interrupts may not be functioning with adaptec AHA-2940 on 8-Stable Message-ID: <201004111921.04581.christof.schulze@gmx.com>
next in thread | raw e-mail | index | archive | help
--nextPart317753218.MtYP5YrO9v
Content-Type: Text/Plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hello world,
I am getting this error ahc0: Timedout SCBs already complete. Interrupts ma=
y=20
not be functioning.
on a 8-stable system on amd64. This card used to work in a 32bit 8.0.=20
=46rom previous posts I found that this might be connected to interrupt cod=
e,=20
but I am not sure this really is the same error. I tried to gather relevant=
=20
information below, please let me know if I forgot anything and how I can he=
lp=20
to get this fixed.=20
I got this while trying to access my scsi scanner which is hooked up to the=
=20
adaptec controller in question.
Regards
Christof
uname -a
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
=46reeBSD eri 8.0-STABLE FreeBSD 8.0-STABLE #1: Thu Feb 25 04:01:40 CET 201=
0 =20
root@eri:/usr/obj/usr/src/sys/GENERIC amd64
camcontrol -devlist
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
<SCANNER 2.02> at scbus0 target 6 lun 0 (pass0)
<HDS722580VLSA80 V32OA63A> at scbus1 target 0 lun 0 (pass1,ada0)
<SAMSUNG SP2504C VT100-50> at scbus2 target 0 lun 0 (pass2,ada1)
<SAMSUNG HD322HJ 1AC01118> at scbus3 target 0 lun 0 (pass3,ada2)
<SAMSUNG SP2504C VT100-50> at scbus4 target 0 lun 0 (pass4,ada3)
<SanDisk SDDR-113 9412> at scbus7 target 0 lun 0 (pass5,da0)
relevant part of pciclonf -lv
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
ahc0@pci0:4:2:0: class=3D0x010000 card=3D0x00000000 chip=3D0x7178900=
4=20
rev=3D0x00 hdr=3D0x00
vendor =3D 'Adaptec Inc'
device =3D 'Fast/Fast-Wide SCSI Ctrlr (AHA-2940/2940W)'
class =3D mass storage
subclass =3D SCSI
dmesg
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD is a registered trademark of The FreeBSD Foundation.
=46reeBSD 8.0-STABLE #1: Thu Feb 25 04:01:40 CET 2010
root@eri:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (3325.02-MHz K8-class=
=20
CPU)
Origin =3D "GenuineIntel" Id =3D 0x20652 Stepping =3D 2
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x298e3ff<SSE3,<b1>,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,C=
X16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,<b25>>
AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant
real memory =3D 8589934592 (8192 MB)
avail memory =3D 8184041472 (7804 MB)
ACPI APIC Table: <INTEL DH55HC >
=46reeBSD/SMP: Multiprocessor System Detected: 4 CPUs
=46reeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 5
ACPI Warning: 32/64X FACS address mismatch in FADT - DF626E40/ =20
0DF626D40, using 32 (20100121/tbfadt-586)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DH55HC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem=20
0xf0000000-0xf7ffffff,0xfe630000-0xfe63ffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe620000-0xfe62ffff at device 0.1 o=
n=20
pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port=20
0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 1=
8=20
at device 22.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 22.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf040-0xf05f mem=20
0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:27:0e:05:b8:cc
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfe727000-0xfe7273ff irq 1=
6=20
at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
hdac0: <Intel PCH High Definition Audio Controller> mem 0xfe720000-0xfe723f=
ff=20
irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100122_0141
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfe726000-0xfe7263ff irq 2=
3=20
at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ahc0: <Adaptec 2940 SCSI adapter> port 0xd000-0xd0ff mem 0xfe508000-0xfe508=
fff=20
irq 18 at device 2.0 on pci4
ahc0: [ITHREAD]
aic7870: Single Channel A, SCSI Id=3D7, 16/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel PCH AHCI SATA controller> port=20
0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem=20
0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 10.000 msec
vboxNetFltInitGlobalsAndIdc failed -2
module_register_init: MOD_LOAD (ng_vboxnetflt, 0xffffffff810fa44b,=20
0xffffffff810f4320) error 22
vboxdrv: fAsync=3D0 offMin=3D0x19c offMax=3D0x2b4
vboxnet0: Ethernet address: 0a:00:27:00:00:00
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on=
=20
usbus1
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on=
=20
usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Kyocera Mita> at usbus0
ulpt0: <Kyocera Mita Kyocera Mita FS-1020D, class 0/0, rev 1.01/0.00, addr =
3>=20
on usbus0
ulpt0: using bi-directional mode
ugen1.3: <SanDisk> at usbus1
umass0: <SanDisk SDDR-113, class 0/0, rev 2.00/94.12, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks =3D 0x0000
umass0:7:0:-1: Attached to scbus7
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready t=
o=20
ready change, medium may have changed)
ugen1.4: <Logitech> at usbus1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 4> on usbus1
ums0: 16 buttons and [XYZ] coordinates ID=3D0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 4> on usbus1
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <HDS722580VLSA80 V32OA63A> ATA-6da0 at umass-sim0 bus 0 scbus7 target=
0=20
lun 0
da0: <SanDisk SDDR-113 9412> Removable Direct Access SCSI-0 device=20
da0: 40.000MB/s transfers
da0: 7790MB (15954944 512 byte sectors: 255H 63S/T 993C)
SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 78533MB (160836480 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <SAMSUNG HD322HJ 1AC01118> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
pass0 at ahc0 bus 0 scbus0 target 6 lun 0
pass0: <SCANNER 2.02> Fixed Scanner SCSI-CCS device=20
pass0: 3.300MB/s transfers
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
Root mount waiting for: usbus1
ugen1.5: <vendor 0x046d> at usbus1
uaudio0: <vendor 0x046d product 0x08d7, class 0/0, rev 1.10/1.00, addr 5> o=
n=20
usbus1
uaudio0: No playback!
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm4: <USB audio> on uaudio0
Trying to mount root from zfs:zroot
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <ATI Radeon RV370 X300 SE> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.31.0 20080613
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 2 usecs
drm0: [ITHREAD]
ahc0: PCI error Interrupt at seqaddr =3D 0x7a
ahc0: Received a Master Abort
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x7d
Card was paused
ACCUM =3D 0x0, SINDEX =3D 0xb8, DINDEX =3D 0xa8, ARG_2 =3D 0x3d
HCNT =3D 0x60 SCBPTR =3D 0x0
SCSISIGI[0xc6]:(REQI|BSYI|IOI|CDI) ERROR[0x40]:(PCIERRSTAT)=20
SCSIBUSL[0x0] LASTPHASE[0x40]:(IOI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)=20
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)=20
SEQ_FLAGS[0x20]:(DPHASE) SSTAT0[0x4]:(SDONE) SSTAT1[0x13]:(REQINIT|PHASECHG|
PHASEMIS)=20
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|
ENSCSIRST|ENSELTIMO)=20
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x3a]:(FIFOFLUSH|HDMAEN|SDMAEN|SCSIEN)=20
DFSTATUS[0x50]:(MREQPEND|DFCACHETH)=20
STACK: 0x0 0x165 0x195 0x6d
SCB count =3D 254
Kernel NEXTQSCB =3D 247
Card NEXTQSCB =3D 247
QINFIFO entries:=20
Waiting Queue entries:=20
Disconnected Queue entries:=20
QOUTFIFO entries:=20
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15=20
Sequencer SCB Info:=20
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
SCB_TAG[0xf6]=20
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
Pending list:=20
246 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 2=
38=20
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219=
=20
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200=
=20
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181=
=20
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162=
=20
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143=
=20
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124=
=20
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105=
=20
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 8=
1=20
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 =
55=20
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 =
29=20
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 =
0=20
Untagged Q(6): 246=20
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf6 - timed out
sg[0] - Addr 0x69f31520 : Length 96
(pass0:ahc0:0:6:0): BDR message in message buffer
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x7d
Card was paused
ACCUM =3D 0x0, SINDEX =3D 0xb8, DINDEX =3D 0xa8, ARG_2 =3D 0x3d
HCNT =3D 0x60 SCBPTR =3D 0x0
SCSISIGI[0xd6]:(REQI|BSYI|ATNI|IOI|CDI) ERROR[0x40]:(PCIERRSTAT)=20
SCSIBUSL[0x0] LASTPHASE[0x40]:(IOI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)=20
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)=20
SEQ_FLAGS[0x20]:(DPHASE) SSTAT0[0x4]:(SDONE) SSTAT1[0x13]:(REQINIT|PHASECHG|
PHASEMIS)=20
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|
ENSCSIRST|ENSELTIMO)=20
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x3a]:(FIFOFLUSH|HDMAEN|SDMAEN|SCSIEN)=20
DFSTATUS[0x50]:(MREQPEND|DFCACHETH)=20
STACK: 0x0 0x165 0x195 0x6d
SCB count =3D 254
Kernel NEXTQSCB =3D 247
Card NEXTQSCB =3D 247
QINFIFO entries:=20
Waiting Queue entries:=20
Disconnected Queue entries:=20
QOUTFIFO entries:=20
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15=20
Sequencer SCB Info:=20
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
SCB_TAG[0xf6]=20
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
Pending list:=20
246 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 2=
38=20
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219=
=20
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200=
=20
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181=
=20
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162=
=20
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143=
=20
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124=
=20
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105=
=20
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 8=
1=20
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 =
55=20
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 =
29=20
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 =
0=20
Untagged Q(6): 246=20
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf6 - timed out
sg[0] - Addr 0x69f31520 : Length 96
(pass0:ahc0:0:6:0): no longer in timeout, status =3D 24b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x1a6
Card was paused
ACCUM =3D 0x0, SINDEX =3D 0x20, DINDEX =3D 0xa0, ARG_2 =3D 0x3d
HCNT =3D 0x20 SCBPTR =3D 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]=20
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)=20
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)=20
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)=20
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|
ENSCSIRST|ENSELTIMO)=20
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)=20
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)=20
STACK: 0x192 0xe 0x0 0x165
SCB count =3D 254
Kernel NEXTQSCB =3D 246
Card NEXTQSCB =3D 247
QINFIFO entries: 247=20
Waiting Queue entries:=20
Disconnected Queue entries:=20
QOUTFIFO entries:=20
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15=20
Sequencer SCB Info:=20
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
SCB_TAG[0xff]=20
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
Pending list:=20
247 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x80]:
(SCB_XFERLEN_ODD)=20
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 2=
38=20
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219=
=20
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200=
=20
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181=
=20
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162=
=20
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143=
=20
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124=
=20
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105=
=20
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 8=
1=20
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 =
55=20
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 =
29=20
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 =
0=20
Untagged Q(6): 247=20
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf7 - timed out
sg[0] - Addr 0x69f31610 : Length 5
(pass0:ahc0:0:6:0): SCB 247: Immediate reset. Flags =3D 0x620
(pass0:ahc0:0:6:0): no longer in timeout, status =3D 25b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x1a6
Card was paused
ACCUM =3D 0x0, SINDEX =3D 0x20, DINDEX =3D 0xa0, ARG_2 =3D 0x3d
HCNT =3D 0x20 SCBPTR =3D 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]=20
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)=20
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)=20
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)=20
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|
ENSCSIRST|ENSELTIMO)=20
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)=20
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)=20
STACK: 0x192 0xe 0x192 0xe
SCB count =3D 254
Kernel NEXTQSCB =3D 247
Card NEXTQSCB =3D 246
QINFIFO entries: 246=20
Waiting Queue entries:=20
Disconnected Queue entries:=20
QOUTFIFO entries:=20
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15=20
Sequencer SCB Info:=20
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
SCB_TAG[0xff]=20
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)=20
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]=20
Pending list:=20
246 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]=20
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 2=
38=20
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219=
=20
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200=
=20
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181=
=20
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162=
=20
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143=
=20
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124=
=20
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105=
=20
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 8=
1=20
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 =
55=20
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 =
29=20
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 =
0=20
Untagged Q(6): 246=20
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf6 - timed out
sg[0] - Addr 0x7f266980 : Length 96
(pass0:ahc0:0:6:0): SCB 246: Immediate reset. Flags =3D 0x620
(pass0:ahc0:0:6:0): no longer in timeout, status =3D 25b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
=2D-=20
() ascii ribbon campaign - against html e-mail=20
/\ www.asciiribbon.org - against proprietary attachments
--nextPart317753218.MtYP5YrO9v
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (FreeBSD)
iEYEABECAAYFAkvCBQAACgkQpZfyPAmdZJlYnACeLvzP4D8yDA5tYW3k9FvOdqh8
oGkAoIMxLkHw1YJclcNifp8NnBBPliL+
=yHwF
-----END PGP SIGNATURE-----
--nextPart317753218.MtYP5YrO9v--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201004111921.04581.christof.schulze>