Date: Mon, 15 Apr 1996 17:17:45 -0400 From: tongq@niseeast.nosc.mil (tongq) To: hosokawa@mnt.cs.keio.ac.jp, phk@freebsd.org, questions@freebsd.org Subject: PCCARD configuration Message-ID: <1736fdb0@niseeast.nosc.mil>
index | next in thread | raw e-mail
I am trying to use a Megahertz XJEM1144/CCEM1144 to work with my
Samsung Laptop. I have the PCCARD configured but I can get the right
config index and IRQ. The ethernet capability is the main concern for
me so I don't really need to use it as a modem is that is important.
The following is the PCCARDC DUMPCIS:
Any help would be great!
Quoc Tong
NISE East
Charleston SC, USA
==========================================================
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 44
000: 04 01 4d 45 47 41 48 45 52 54 5a 00 58 4a 45 4d
010: 31 31 34 34 2f 43 43 45 4d 31 31 34 34 00 50 43
020: 4d 43 49 41 20 4d 4f 44 45 4d 00 ff
Version = 4.1, Manuf = [MEGAHERTZ],card vers = [XJEM1144/CCEM1144]
Addit. info = [PCMCIA MODEM],[ÿ]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 02 01 00 00
PCMCIA ID = 0x102, OEM ID = 0x0
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 27 00 03 03
Reg len = 2, config register addr = 0x300, last config = 0x27
Registers: XX------
Tuple #6, code = 0x1b (Configuration entry), length = 18
000: e3 01 9d 49 55 1e 2d fc 14 a0 60 f8 03 07 30 ff
010: ff 08
Config index = 0x23(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 1.5 x 100mA
Power down supply current: 2.5 x 10mA
Wait scale Speed = 1.2 x 10 us
Card provides address decode, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Audio-BVD2)
Tuple #7, code = 0x1b (Configuration entry), length = 8
000: 23 88 a0 60 f8 02 07 08
Config index = 0x23
Card provides address decode, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Max twin cards = 0
Misc attr: (Audio-BVD2)
Tuple #8, code = 0x1b (Configuration entry), length = 8
000: 23 88 a0 60 e8 03 07 08
Config index = 0x23
Card provides address decode, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Max twin cards = 0
Misc attr: (Audio-BVD2)
Tuple #9, code = 0x1b (Configuration entry), length = 8
000: 27 88 a0 60 e8 02 07 08
Config index = 0x27
Card provides address decode, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Max twin cards = 0
Misc attr: (Audio-BVD2)
Tuple #10, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 7f
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #11, code = 0x22 (Functional EXT), length = 9
000: 01 1f 09 00 03 00 00 03 00
Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 12
000: 02 03 00 3f 1e 03 03 08 03 00 00 b5
Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 23 03 00 0f 00 02 00 b5
Tuple #14, code = 0x0 (Null tuple), length = 14
000: 45 54 48 45 52 4e 45 54 2f 4d 4f 44 45 4d
Tuple #15, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #16, code = 0x15 (Version 1 info), length = 69
000: 04 01 4d 65 67 61 68 65 72 74 7a 00 58 4a 45 4d
010: 31 31 34 34 2f 43 43 45 4d 31 31 34 34 00 50 43
020: 4d 43 49 41 20 45 54 48 45 52 4e 45 54 20 41 44
030: 41 50 54 4f 52 00 30 30 30 30 38 36 30 36 39 45
040: 37 31 00 00 ff
Version = 4.1, Manuf = [Megahertz],card vers = [XJEM1144/CCEM1144]
Addit. info = [PCMCIA ETHERNET ADAPTOR],[000086069E71]
Tuple #17, code = 0x1a (Configuration map), length = 5
000: 01 03 00 03 03
Reg len = 2, config register addr = 0x300, last config = 0x3
Registers: XX------
Tuple #18, code = 0x1b (Configuration entry), length = 10
000: c3 01 19 11 55 46 68 30 ff ff
Config index = 0x3(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 4 x 100mA
Card decodes 8 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #19, code = 0x1b (Configuration entry), length = 5
000: 83 01 08 68 ff
Config index = 0x3
Interface byte = 0x1 (I/O)
Card decodes 8 address lines, full 8/16 Bit I/O
Tuple #20, code = 0x20 (Manufacturer ID), length = 4
000: 28 01 01 01
PCMCIA ID = 0x128, OEM ID = 0x101
Tuple #21, code = 0xff (Terminator), length = 0
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 49 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = ON
Speed = 250nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x15 (Version 1 info), length = 57
000: 04 01 41 64 61 70 74 65 63 2c 20 49 6e 63 2e 00
010: 41 50 41 2d 31 34 36 30 20 53 43 53 49 20 48 6f
020: 73 74 20 41 64 61 70 74 65 72 00 56 65 72 73 69
030: 6f 6e 20 30 2e 30 31 00 ff
Version = 4.1, Manuf = [Adaptec, Inc.],card vers = [APA-1460 SCSI
Host Adapter]
Addit. info = [Version 0.01],[ÿ]
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 2f 01 01 00
PCMCIA ID = 0x12f, OEM ID = 0x1
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 08 00 20 01
Reg len = 2, config register addr = 0x2000, last config = 0x8
Registers: X-------
Tuple #6, code = 0x1b (Configuration entry), length = 11
000: c9 01 18 ca 60 40 03 1f 30 00 1e
Config index = 0x9(default)
Interface byte = 0x1 (I/O)
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
IRQ modes: Level
IRQs: 9 10 11 12
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 08 08 ca 60 40 01 1f
Config index = 0x8
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x140 block length = 0x20
Tuple #8, code = 0x14 (No link), length = 0
Tuple #9, code = 0xff (Terminator), length = 0
2 slots found
=================================================
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1736fdb0>