Date: Sat, 15 Dec 2001 19:07:37 -0800 From: Edwin Culp <eculp@EnContacto.Net> To: Andy Sparrow <spadger@best.com> Cc: Gerardo Amaya <gerardo@delaluz.net>, freebsd-mobile@FreeBSD.ORG, freebsd-hardware@FreeBSD.ORG, andy@CRWdog.demon.co.uk Subject: Re: Almost give up with this Message-ID: <1008472057.3c1c0ff9d2348@Mail.SavvyWorld.Net> In-Reply-To: <20011216024751.C13143E17@CRWdog.demon.co.uk> References: <20011216024751.C13143E17@CRWdog.demon.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the info, Andy. I didn't realize that Compaq was already using different chipsets. That is always a problem with Compaq laptops. The configuration filet that I sent works with the LM chipset. Gerardo, as Andy and I both said, send us a dmesg and/or scanpci, if the configuration file doesn't work. ed Quoting Andy Sparrow <spadger@best.com>: > > Please post a dmesg. > > Then we can tell you whether the help Edwin tried to give you (with the > config > file) or the help I tried to give you (advising that a Radeon M6 requires > XFree86-4.1.99 from www.XFree86.org's CVS server later than Nov) is the > appropriate path to follow. > > > FYI, the chipid is the model of the graphics chipset, and this can be seen > from either 'dmesg' output or a 'scanpci'. > > The Radeon M6 is aka the LY. > > Therefore, an LY is 0x4c59, and this *requires* support from XFree86.org. Or > > wait until next year when XFree86 4.2 is released. > > An ATI Rage 128 Mobility M1 is an LM, and this (and many others Rage/Radeon > > cards) will work with XFree86-4.1 from 'ports'. > > The M6/LY card will not. It might, if you force the chipset recognition code, > > but there are still potentially LCD panel detection issues with pre-December > > XFree86 code. > > Cheers, > > AS > > I have a compaq presario 1700 with a mobility radeon card. I install > > XFree 4.1.0 and when I try > > > > # XFree86 -configure > > > > I get this error > > > > Fatal server error: > > > > XFree86 has found a valid card configuration. > > Unfortunately the appropriate data has not been added to xf86PciInfo.h. > > Please forward 'scanpci -v' output to XFree86 support team. > > > > When reporting a problem related to a server crash, please send > > the full server output, not just the last messages. > > This can be found in the log file "/var/log/XFree86.0.log". > > Please report problems to xfree86@xfree86.org. > > > > I attach my scanpci -v output if someone wants to see it > > > > Is my card PCI or AGP?? > > I try to load the agp module and got the same error. > > > > I really need to run this thing > > > > thanks > > > > Gerardo > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > > > --- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1008472057.3c1c0ff9d2348>