Date: Thu, 12 Sep 2002 18:52:38 -0400 (EDT) From: Wesley Morgan <morganw@chemikals.org> To: firewire@freebsd.org Subject: panics, ipod Message-ID: <20020912182015.J22383-200000@volatile.chemikals.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Trying to mount my iPod panics my kernel quite reliably. For some reason
I'm not getting any crash dumps from it, and the instruction pointer
doesnt give me anything useful... I'm pretty certain it's in the module :P
dmesg is attached... Firewire card is a Western Digital WDAD003-RNW
cardbus card.
I figure if theres talk about committing it its time to start beating it
up :)
I'm game for trying anything and everything to fix this puppy!
--
_ __ ___ ____ ___ ___ ___
Wesley N Morgan _ __ ___ | _ ) __| \
morganw@chemikals.org _ __ | _ \._ \ |) |
FreeBSD: The Power To Serve _ |___/___/___/
Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread!
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Sep 12 13:03:43 MDT 2002
root@catalyst:/usr/src/sys/i386/compile/CATALYST-NC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc046d000.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc046d0b4.
Preloaded elf module "/boot/kernel/sbp.ko" at 0xc046d164.
Preloaded elf module "/boot/kernel/if_fwe.ko" at 0xc046d20c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc046d2b8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 995962721 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (995.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 519438336 (507264K bytes)
avail memory = 499449856 (487744K bytes)
Pentium Pro MTRR support enabled
VESA: v2.0, 16384k memory, flags:0x0, mode table:0xc039e700 (1000040)
VESA: Trident CYBER 8820
Using $PIR table, 7 entries at 0xc00f01d0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
can't fetch resources for \\_SB_.PCI0.FNC0.PRT_ - AE_BAD_DATA
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib2
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
atapci0: <AcerLabs Aladdin ATA66 controller> port 0xeff0-0xefff at device 4.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached)
pci0: <network, ethernet> at device 10.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: slot 17 INTA is routed to irq 11
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 17.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib1: slot 17 INTB is routed to irq 11
pci0: <base peripheral> at device 18.0 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x6 on isa0
sc0: VGA <16 virtual consoles, flags=0x206>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled
Functions: Unknown(11), Multi-Functioned
Function Extension: 0100009001
Manufacturer ID: ee121180
Product version: 7.0
Product name: Western Digital Corporation | Western Digital 1394 PC Card | | |
CIS reading done
cardbus0: Resource not specified in CIS: id=10, size=1000
cardbus0: Resource not specified in CIS: id=14, size=100
cardbus0: Resource not specified in CIS: id=18, size=100
fwohci0: <1394 Open Host Controller Interface> mem 0x88003000-0x880030ff,0x88003100-0x880031ff,0x88002000-0x88002fff irq 11 at device 0.0 on cardbus0
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xf8009002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:90:a9:40:04:00:4c:51
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
if_fwe0: <Ethernet over Firewire> on firewire0
if_fwe0: 02:90:a9:00:4c:51
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
firewire0: BUS reset
firewire0: BUS reset
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 63->1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
fw_bus_explore: node 0 link down
bus_explore done
fw_bus_explore: node 0 link down
bus_explore done
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
bus_explore done
firewire0: BUS reset
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
fw_bus_explore: node 1 link down
bus_explore done
firewire0: BUS reset
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
bus_explore done
firewire0: BUS reset
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: txd err=1b ack tardy
resp != 0: node=1 addr=0x400
bus_explore done
retry_count = 1
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
firewire0: BUS reset
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=1b
ad0: 28615MB <TOSHIBA MK3017GAP> [58140/16/63] at ata0-master UDMA66
acd0: CD-RW <UJDA720 DVD/CDRW> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [3322697 x 2048 byte records]
firewire0:Discover new S400 device ID:000a27000204ff40
bus_explore done
Device SBP-II
sbp_post_explore: EUI:000a27000204ff40 spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:0 type:14 EUI:000a27000204ff40 node:1 speed:2 maxrec:10 new!
sbp0:0:0 'Apple Computer, Inc.' 'iPod' '0a2700'
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0010020, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:1 len:2 stat:0 orb:0006aa270
sbp0:0:0 No additional information to report
sbp0:0:0 sbp_agent_reset
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 80 00 ff 00 00 00 00 00, flags: 0x40, 6b cmd/255b data/18b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 5 code 26 qlfr 1 len 2
da0 at sbp0 bus 0 target 0 lun 0
da0: <Apple Co iPod 2700> Removable Simplified Direct Access SCSI-2 device
da0: 50.000MB/s transfers
da0: 19073MB (39062520 512 byte sectors: 255H 63S/T 2431C)
firewire0: BUS reset
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 63->1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
bus_explore done
sbp_post_explore: EUI:000a27000204ff40 spec=1 key=1.
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:0 type:14 EUI:000a27000204ff40 node:0 speed:2 maxrec:10
sbp0:0:0 'Apple Computer, Inc.' 'iPod' '0a2700'
sbp0:0:0 reconnect: len 16, ID 0, cmd 0000fffff0010020
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020912182015.J22383-200000>