Date: Thu, 12 Jul 2001 18:34:58 -0500 From: Steve Price <steve@havk.org> To: Bill Paul <wpaul@FreeBSD.ORG> Cc: Brett Glass <brett@lariat.org>, hardware@FreeBSD.ORG Subject: Re: Driver for D-Link DWL-650 card? Message-ID: <20010712183458.X75539@bsd.havk.org> In-Reply-To: <20010712204350.9DB3237B401@hub.freebsd.org>; from wpaul@FreeBSD.ORG on Thu, Jul 12, 2001 at 01:43:50PM -0700 References: <4.3.2.7.2.20010712011741.046013b0@localhost> <20010712204350.9DB3237B401@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--X3gaHHMYHkYqP6yf
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Thu, Jul 12, 2001 at 01:43:50PM -0700, Bill Paul wrote:
>
> Somebody showed me one of these at USENIX and asked me to make it
> work for them. You need the latest if_wi driver from -stable or
> -current, but it will work. These are PRISM II cards. The only
> glitch is that reading the station address during the driver attach
> phase sometimes fails, so I tweaked the driver to try reading it
> twice. This is why you need the latest 4.3-STABLE or 5.0-CURRENT
> driver.
Is there any special trick to get one running? Attached the
dmesg output. When I try to fire-up pccardd I'm greeted with
this message:
root@tucker(/etc)# pccardd
Jul 12 18:28:46 tucker pccardd[332]: fatal error: no PC-CARD slots
Jul 12 18:28:46 tucker pccardd[332]: fatal error: no PC-CARD slots
I'm assuming I need to be running pccardd to use this card. This
is with -stable sources CVSup'd about an hour or so ago and a
GENERIC kernel.
Thanks.
-steve
--X3gaHHMYHkYqP6yf
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Thu Jul 12 17:48:53 CDT 2001
root@tucker.dogbark.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (596.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1041305600 (1016900K bytes)
Preloaded elf kernel "kernel" at 0xc045e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
pci2: <PCI bus> on pcib3
pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 0 at device 7.0 on pci2
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 11 at device 12.0 on pci0
aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 11 at device 12.1 on pci0
aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 10 at device 14.0 on pci0
fxp0: Ethernet address 00:90:27:f6:8d:05
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2840-0x285f irq 10 at device 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 18.3 on pci0
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 14324MB <QUANTUM FIREBALLP LM15> [29104/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
--X3gaHHMYHkYqP6yf--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010712183458.X75539>