Date: Sat, 26 Apr 2014 23:26:03 +0100 From: fabiodive <fabiodive@gmail.com> To: Winston Smith <smith.winston.101@gmail.com> Cc: FreeBSD ARM <freebsd-arm@freebsd.org>, Xuebing Wang <xbing6@gmail.com> Subject: Re: BBB 1GHz patches for u-boot 2014-01 Message-ID: <7249A68B-E3D4-4795-BD51-4DF149B4104A@gmail.com> In-Reply-To: <CADH-AwHycQ1aOstiCn_iE3cHHq1%2Bu18EkFkSVCf%2BdvfP1zn%2BGQ@mail.gmail.com> References: <F12C31D0-535B-4A67-8613-A66BABF7BD0B@gmail.com> <CADH-AwHycQ1aOstiCn_iE3cHHq1%2Bu18EkFkSVCf%2BdvfP1zn%2BGQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
OK, I would like to add a couple of details: -I patched the u-boot 2014-01 with the last patch set from Xuebing, it works very good, I suppose at 1GHz,=20 -I get the panic during intensive sdcard write operation such as download, untar or install a port. -this maybe related with the new crochet version is=20 the eMMC is not recognised, I don't have the /dev/mmcsd1 device so I can't copy the system on the flash. thanks for your reply, f. On Apr 26, 2014, at 23:17 , Winston Smith <smith.winston.101@gmail.com> = wrote: > I saw something similar, but it didn't panic: >=20 > sdhci_ti1-slot0: Got data interrupt 0x00100000, but there is no active = command. > sdhci_ti1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101 > sdhci_ti1-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000000 > sdhci_ti1-slot0: Argument: 0x06c8d600 | Trn mode: 0x0000183a > sdhci_ti1-slot0: Present: 0x01e70000 | Host ctl: 0x00000004 > sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000 > sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00000007 > sdhci_ti1-slot0: Timeout: 0x0000000d | Int stat: 0x00000000 > sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb > sdhci_ti1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_ti1-slot0: Caps: 0x06e10080 | Max curr: 0x00000000 > sdhci_ti1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > mmcsd1: Error indicated: 1 Timeout >=20 >=20 > I think perhaps FreeBSD-CURRENT is a bit too bleeding edge ... I have > been trying to get 10-STABLE to work, it's fine on the SD card, but it > hangs during boot on the eMMC. However 11-CURRENT boots ok on the > eMMC, but has issues like this. >=20 > -W.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7249A68B-E3D4-4795-BD51-4DF149B4104A>