Skip site navigation (1)Skip section navigation (2)
Date:      17 May 2002 17:06:30 -0400
From:      Joe Marcus Clarke <marcus@marcuscom.com>
To:        Tsu-Fan Cheng <tfcheng@tfcheng.dnsq.org>
Cc:        gnome@FreeBSD.ORG
Subject:   Re: bonobo-activation failed
Message-ID:  <1021669590.578.127.camel@gyros.marcuscom.com>
In-Reply-To: <20020517162358.Y92723-300000@tfcheng.dnsq.org>

index | next in thread | previous in thread | raw e-mail

On Fri, 2002-05-17 at 16:25, Tsu-Fan Cheng wrote:
> configure: error: Library requirements (        gmodule-2.0 >= 2.0.1
> ORBit-2.0 >= 2.3.108    ORBit-CosNaming-2.0 >= 2.3.108  libxml-2.0 >=
> 2.4.20) not met; consider adjusting the PKG_CONFIG_PATH environment
> variable if your libraries are in a nonstandard prefix so pkg-config can
> find them.

Uh, your libxml2 port is out of date.  Please remove both of the libxml2
ports you have installed, then install libxml-2.4.21.

Joe

> 
> 
> Best Regards,
> 
> Tsu-Fan Cheng [鄭祖帆] (BIG5)			Jen-Chih Hsieh's lab [謝仁至]
> SUNY at Stony Brook		 		Tel: 1-631-632-1664 435R
> Stony Brook, NY, 11794
> 
> "There is no gene for the human spirits"	~GATTACA
> 
> 散步、划船、騎自行車、抽煙、閒談、喝下午茶、吃牛油烤餅、看閒書。
> ----
> 

> AbiWord-gnome-1.0.1
> Mesa-3.4.2_2
> ORBit-0.5.13_1
> ORBit2-2.3.108
> XFree86-4.1.0_12,1
> XFree86-4.2.0_1,1
> XFree86-documents-4.2.0
> XFree86-libraries-4.2.0_1
> Xaw3d-1.5
> aalib-1.4.r5
> acroread4-4.05
> arts-1.0.0_1
> atk-1.0.1
> aub-2.0.5
> autoconf213-2.13.000227_1
> automake14-1.4.5
> bison-1.30
> bonobo-1.0.19
> cap-6.0.198
> cclient-2001a,1
> cups-base-1.1.14
> cvsup-16.1f
> db-2.7.7
> db3-3.2.9_3,1
> emacs-21.2
> esound-0.2.23
> expat-1.95.2
> ezm3-1.0
> fam-2.6.4
> ffcall-1.8
> ffmpeg-0.4.5_1
> flashplayer-0.4.10_1
> flashplugin-mozilla-0.4.10_1
> freetype-1.3.1_2
> freetype2-2.0.6
> freetype2-2.0.9
> gal-0.19.1
> gconf-1.0.7_1
> gconf2-1.1.10
> gdbm-1.8.0
> gdk-pixbuf-0.15.0
> gettext-0.10.35_1
> gettext-0.10.40
> gettext-0.11.1_1
> ghostscript-gnu-6.52_5
> gimp-1.2.2_1,1
> glib-1.2.10_5
> glib-2.0.1_1
> glibwww-0.2_1
> gmake-3.79.1
> gnomeaudio-1.4.0
> gnomecanvas-0.15.0
> gnomecontrolcenter-1.4.0.1
> gnomecore-1.4.0.6_1
> gnomedb-0.2.96
> gnomelibs-1.4.1.3
> gnomemimedata-1.0.8
> gnomeprint-0.35
> gnomevfs-1.0.3
> gnuls-4.0_1
> gnustep-1.3.0
> gnustep-base-1.3.0
> gnustep-gui-0.7.6
> gnustep-make-1.3.0
> gnustep-objc-1.2.0
> gnustep-xgps-0.7.6
> gqview-gnome-1.1.1
> gtar-1.13.25
> gtk-1.2.10_3
> gtk-2.0.2
> gtk-gnutella-0.80
> gtk-gnutella-0.85
> gtkhtml-1.0.2
> guile-1.4
> gv-3.5.8
> id3tool-1.1f
> imake-4.2.0
> imlib-1.9.11
> irc-2.10.3
> javavmwrapper-1.4
> jdk-1.3.1p6_2
> jpeg-6b_1
> kde-3.0_1
> kdebase-3.0_1
> kdegames-3.0_1
> kdegraphics-3.0_1
> kdelibs-3.0_1
> kdemultimedia-3.0_1
> kdenetwork-3.0_1
> kdeutils-3.0
> koffice-1.1.1,1
> lcms-1.08
> leim-21.2
> libIDL-0.7.4
> liba52-0.7.2
> libart_lgpl2-2.3.8
> libaudiofile-0.2.2
> libaudiofile-0.2.3
> libdvdcss-gtk-1.0.1
> libflash-0.4.10
> libgda-0.2.96
> libghttp-1.0.9
> libglade-0.17_2
> libglade2-1.99.11
> libgnomecanvas-1.116.0
> libgnugetopt-1.1
> libiconv-1.7_1
> libiconv-1.7_2
> libmikmod-3.1.9
> libmng-1.0.3
> libogg-1.0.r3,2
> libogg-1.0.r3_1,2
> librep-0.15.2
> libtool-1.3.4_2
> libungif-4.1.0b1
> libunicode-0.4_2
> libvorbis-1.0.r3,2
> libvorbis-1.0.r3_1,2
> libwww-5.3.2
> libxine-0.9.8_1
> libxml-1.8.16
> libxml2-2.4.17_1
> libxml2-2.4.19
> libxslt-1.0.7
> linc-0.1.21
> linux-jdk-1.3.1.02_1
> linux-openmotif-2.1.30
> linux-opera-6.0.20020218
> linux-png-1.0.3_1
> linux_base-6.1_1
> lynx-ssl-2.8.4.1b
> m4-1.4_1
> mad-esound-0.14.2b_1
> mozilla-0.9.9_2,1
> mozilla-1.0.rc1,1
> mozilla-1.0.rc1_2,1
> mozilla-1.0.rc2,1
> mozilla-fonts-1.0_1
> mp3_check-1.98
> mp3check-1.5
> mpeg_lib-1.3.1
> mpg123-esound-0.59r_6
> mplayer-0.60.1_2
> mplayer-fonts-0.50
> mplayer-skins-1.0.0
> nasm-0.98,1
> ncftp-2.4.3
> nspr-4.1.2
> oaf-0.6.7
> open-motif-2.1.30_2
> open-motif-devel-2.1.30
> pango-1.0.1_1
> pcre-3.7
> pine-4.44
> pkg_tarup-1.2_3
> pkgconfig-0.12.0
> pkgconfig-0.8.0
> pkgdb.db
> png-1.2.1
> popt-1.5.1
> portupgrade-20020321
> psiconv-0.8.3
> pspell-0.12.2_1
> py22-expat-2.2.1
> python-2.2.1
> python-2.2_1
> python-2.2_2
> qt-3.0.3_1
> rasmol-2.7.2_1
> rep-gtk-gnome-0.15_1
> rpm-3.0.6_5
> ruby-1.6.7.2002.03.13
> ruby-bdb1-0.1.6
> ruby-fnmatch-1.1b_1
> ruby-optparse-0.8.6
> sawfish-gnome-1.0.1
> scrollkeeper-0.2_3
> sdl-1.2.3_1
> stlport-4.5.3
> svgalib-1.4.2_1
> tiff-3.5.7
> tin-1.5.11
> unrar-2.50
> unzip-5.42
> urwfonts-1.0
> uulib-0.5.13
> wget-1.8.1
> win32-codecs-011002.0.0.60
> wrapper-1.0_1
> xanim-2.80.2
> xfishtank-2.2
> xine-0.9.8_1
> xmms-gnome-1.2.7
> xv-3.10a_2
> zh-arphicttf-2.11_1
> zh-bg5ps-1.3.0p3
> zh-enscript-a4-1.6.1_1
> zh-ghostscript-6.52
> zh-kcfonts-1.05
> zh-libtabe-0.2.2
> zh-moefonts-cid-1.0
> zh-mozilla-tclp-0.9.9
> zh-rxvt-2.7.5
> zh-ttfm-0.9.3_1
> zh-tw-rxvt-2.6.4
> zh-xcin-2.5.2.3_1
> zip-2.3
> 
> ----
> 

> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
> 
> It was created by configure, which was
> generated by GNU Autoconf 2.52.  Invocation command line was
> 
>   $ ./configure --with-html-dir=/usr/local/share/doc --prefix=/usr/local --target=i386-unknown-freebsd4.5
> 
> ## ---------- ##
> ## Platform.  ##
> ## ---------- ##
> 
> hostname = tfcheng.dnsq.org
> uname -m = i386
> uname -r = 4.5-RELEASE
> uname -s = FreeBSD
> uname -v = FreeBSD 4.5-RELEASE #3: Fri Mar 29 18:12:44 EST 2002     tfcheng@tfcheng.dnsq.org:/usr/src/sys/compile/TFCHENG 
> 
> /usr/bin/uname -p = i386
> /bin/uname -X     = unknown
> 
> /bin/arch              = unknown
> /usr/bin/arch -k       = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo               = unknown
> /bin/machine           = unknown
> /usr/bin/oslevel       = unknown
> /bin/universe          = unknown
> 
> PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/root/bin
> 
> ## ------------ ##
> ## Core tests.  ##
> ## ------------ ##
> 
> configure:1131: PATH=".;."; conftest.sh
> conftest.sh: not found
> configure:1134: $? = 127
> configure:1186: checking for a BSD compatible install
> configure:1235: result: /usr/bin/install -c -o root -g wheel
> configure:1246: checking whether build environment is sane
> configure:1289: result: yes
> configure:1304: checking whether gmake sets ${MAKE}
> configure:1324: result: yes
> configure:1352: checking for working aclocal
> configure:1363: result: missing
> configure:1367: checking for working autoconf
> configure:1378: result: missing
> configure:1382: checking for working automake
> configure:1393: result: missing
> configure:1397: checking for working autoheader
> configure:1408: result: missing
> configure:1412: checking for working makeinfo
> configure:1419: result: found
> configure:1466: checking for perl
> configure:1483: found /usr/bin/perl
> configure:1494: result: /usr/bin/perl
> configure:1528: checking whether to enable maintainer-specific portions of Makefiles
> configure:1537: result: no
> configure:1621: checking build system type
> configure:1639: result: i386-unknown-freebsd4.5
> configure:1646: checking host system type
> configure:1660: result: i386-unknown-freebsd4.5
> configure:1710: checking for gcc
> configure:1733: result: cc
> configure:1961: checking for C compiler version
> configure:1964: cc --version </dev/null >&5
> 2.95.3
> configure:1967: $? = 0
> configure:1969: cc -v </dev/null >&5
> Using builtin specs.
> gcc version 2.95.3 20010315 (release) [FreeBSD]
> configure:1972: $? = 0
> configure:1974: cc -V </dev/null >&5
> cc: argument to `-V' is missing
> configure:1977: $? = 1
> configure:1997: checking for C compiler default output
> configure:2000: cc -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:2003: $? = 0
> configure:2032: result: a.out
> configure:2037: checking whether the C compiler works
> configure:2043: ./a.out
> configure:2046: $? = 0
> configure:2061: result: yes
> configure:2068: checking whether we are cross compiling
> configure:2070: result: no
> configure:2073: checking for executable suffix
> configure:2075: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:2078: $? = 0
> configure:2100: result: 
> configure:2106: checking for object suffix
> configure:2124: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:2127: $? = 0
> configure:2146: result: o
> configure:2150: checking whether we are using the GNU C compiler
> configure:2171: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:2174: $? = 0
> configure:2177: test -s conftest.o
> configure:2180: $? = 0
> configure:2192: result: yes
> configure:2198: checking whether cc accepts -g
> configure:2216: cc -c -g -I/usr/local/include conftest.c >&5
> configure:2219: $? = 0
> configure:2222: test -s conftest.o
> configure:2225: $? = 0
> configure:2235: result: yes
> configure:2262: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> conftest.c:2: syntax error before `me'
> configure:2265: $? = 1
> configure: failed program was:
> #ifndef __cplusplus
>   choke me
> #endif
> configure:2373: checking for ld used by GCC
> configure:2436: result: /usr/libexec/elf/ld
> configure:2445: checking if the linker (/usr/libexec/elf/ld) is GNU ld
> GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719 [FreeBSD])
> configure:2457: result: yes
> configure:2461: checking for /usr/libexec/elf/ld option to reload object files
> configure:2468: result: -r
> configure:2473: checking for BSD-compatible nm
> configure:2509: result: /usr/bin/nm -B
> configure:2512: checking whether ln -s works
> configure:2516: result: yes
> configure:2523: checking how to recognise dependant libraries
> configure:2701: result: pass_all
> configure:2707: checking command to parse /usr/bin/nm -B output
> configure:2788: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:2791: $? = 0
> configure:2795: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
> configure:2798: $? = 0
> configure:2850: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c conftstm.o >&5
> configure:2853: $? = 0
> configure:2897: result: ok
> configure:2906: checking how to run the C preprocessor
> configure:2932: cc -E -I/usr/local/include conftest.c
> configure:2938: $? = 0
> configure:2965: cc -E -I/usr/local/include conftest.c
> configure:2962: ac_nonexistent.h: No such file or directory
> configure:2971: $? = 1
> configure: failed program was:
> #line 2961 "configure"
> #include "confdefs.h"
> #include <ac_nonexistent.h>
> configure:3008: result: cc -E
> configure:3023: cc -E -I/usr/local/include conftest.c
> configure:3029: $? = 0
> configure:3056: cc -E -I/usr/local/include conftest.c
> configure:3053: ac_nonexistent.h: No such file or directory
> configure:3062: $? = 1
> configure: failed program was:
> #line 3052 "configure"
> #include "confdefs.h"
> #include <ac_nonexistent.h>
> configure:3104: checking for dlfcn.h
> configure:3114: cc -E -I/usr/local/include conftest.c
> configure:3120: $? = 0
> configure:3139: result: yes
> configure:3326: checking for ranlib
> configure:3341: found /usr/bin/ranlib
> configure:3350: result: ranlib
> configure:3400: checking for strip
> configure:3415: found /usr/bin/strip
> configure:3424: result: strip
> configure:3626: checking for objdir
> configure:3637: result: .libs
> configure:3652: checking for cc option to produce PIC
> configure:3802: result: -fPIC
> configure:3806: checking if cc PIC flag -fPIC works
> configure:3826: cc -c -O -pipe -march=pentiumpro -fPIC -DPIC -I/usr/local/include conftest.c >&5
> configure:3829: $? = 0
> configure:3832: test -s conftest.o
> configure:3835: $? = 0
> configure:3871: result: yes
> configure:3887: checking if cc static flag -static works
> configure:3908: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread -static conftest.c  >&5
> configure:3911: $? = 0
> configure:3914: test -s conftest
> configure:3917: $? = 0
> configure:3931: result: yes
> configure:3942: checking if cc supports -c -o file.o
> configure:3962: cc -c -O -pipe -march=pentiumpro -o out/conftest2.o -I/usr/local/include conftest.c >&5
> configure:3986: result: yes
> configure:3991: checking if cc supports -c -o file.lo
> configure:4015: cc -c -O -pipe -march=pentiumpro -c -o conftest.lo -I/usr/local/include conftest.c >&5
> configure:4018: $? = 0
> configure:4021: test -s conftest.lo
> configure:4024: $? = 0
> configure:4045: result: yes
> configure:4076: checking if cc supports -fno-rtti -fno-exceptions
> configure:4095: cc -c -O -pipe -march=pentiumpro -fno-rtti -fno-exceptions -c conftest.c -I/usr/local/include conftest.c >&5
> configure:4098: $? = 0
> configure:4101: test -s conftest.o
> configure:4104: $? = 0
> configure:4120: result: yes
> configure:4131: checking whether the linker (/usr/libexec/elf/ld) supports shared libraries
> configure:4783: result: yes
> configure:4788: checking how to hardcode library paths into programs
> configure:4812: result: immediate
> configure:4817: checking whether stripping libraries is possible
> configure:4822: result: yes
> configure:4833: checking dynamic linker characteristics
> configure:5226: result: freebsd4.5 ld.so
> configure:5231: checking if libtool supports shared libraries
> configure:5233: result: yes
> configure:5236: checking whether to build shared libraries
> configure:5257: result: yes
> configure:5260: checking whether to build static libraries
> configure:5264: result: no
> configure:5882: checking whether -lc should be explicitly linked in
> configure:5890: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:5893: $? = 0
> configure:5907: cc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
> configure:5910: $? = 1
> configure:5923: result: yes
> configure:6488: checking whether build environment is sane
> configure:6531: result: yes
> configure:6577: checking for gcc
> configure:6600: result: cc
> configure:6828: checking for C compiler version
> configure:6831: cc --version </dev/null >&5
> 2.95.3
> configure:6834: $? = 0
> configure:6836: cc -v </dev/null >&5
> Using builtin specs.
> gcc version 2.95.3 20010315 (release) [FreeBSD]
> configure:6839: $? = 0
> configure:6841: cc -V </dev/null >&5
> cc: argument to `-V' is missing
> configure:6844: $? = 1
> configure:6847: checking whether we are using the GNU C compiler
> configure:6889: result: yes
> configure:6895: checking whether cc accepts -g
> configure:6932: result: yes
> configure:6959: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> conftest.c:2: syntax error before `me'
> configure:6962: $? = 1
> configure: failed program was:
> #ifndef __cplusplus
>   choke me
> #endif
> configure:7065: checking for flex
> configure:7080: found /usr/bin/flex
> configure:7088: result: flex
> configure:7103: checking for flex
> configure:7126: result: flex
> configure:7139: checking for yywrap in -lfl
> configure:7166: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lfl   >&5
> configure:7169: $? = 0
> configure:7172: test -s conftest
> configure:7175: $? = 0
> configure:7186: result: yes
> configure:7249: checking lex output file root
> configure:7268: result: lex.yy
> configure:7272: checking whether yytext is a pointer
> configure:7288: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  -lfl >&5
> configure:7291: $? = 0
> configure:7294: test -s conftest
> configure:7297: $? = 0
> configure:7309: result: yes
> configure:7325: checking for bison
> configure:7340: found /usr/local/bin/bison
> configure:7348: result: bison -y
> configure:7371: checking for a BSD compatible install
> configure:7420: result: /usr/bin/install -c -o root -g wheel
> configure:7431: checking whether ln -s works
> configure:7435: result: yes
> configure:7442: checking whether gmake sets ${MAKE}
> configure:7462: result: yes
> configure:7471: checking for strerror in -lcposix
> configure:7498: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lcposix   >&5
> /usr/libexec/elf/ld: cannot find -lcposix
> configure:7501: $? = 1
> configure: failed program was:
> #line 7479 "configure"
> #include "confdefs.h"
> 
> /* Override any gcc2 internal prototype to avoid an error.  */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
>    builtin and then its argument prototype would still apply.  */
> char strerror ();
> int
> main ()
> {
> strerror ();
>   ;
>   return 0;
> }
> configure:7518: result: no
> configure:7570: checking for ranlib
> configure:7594: result: ranlib
> configure:7606: checking for ANSI C header files
> configure:7620: cc -E -I/usr/local/include conftest.c
> configure:7626: $? = 0
> configure:7713: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:7716: $? = 0
> configure:7718: ./conftest
> configure:7721: $? = 0
> configure:7734: result: yes
> configure:7744: checking for cc option to accept ANSI C
> configure:7801: cc  -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:7804: $? = 0
> configure:7807: test -s conftest.o
> configure:7810: $? = 0
> configure:7827: result: none needed
> configure:7835: checking for an ANSI C-conforming const
> configure:7899: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:7902: $? = 0
> configure:7905: test -s conftest.o
> configure:7908: $? = 0
> configure:7918: result: yes
> configure:7928: checking for inline
> configure:7945: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:7948: $? = 0
> configure:7951: test -s conftest.o
> configure:7954: $? = 0
> configure:7965: result: inline
> configure:7986: checking for sys/types.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for sys/stat.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for stdlib.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for string.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for memory.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for strings.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for inttypes.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:7986: checking for stdint.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8027: stdint.h: No such file or directory
> configure:8001: $? = 1
> configure: failed program was:
> #line 7992 "configure"
> #include "confdefs.h"
> #include <stdio.h>
> #if HAVE_SYS_TYPES_H
> # include <sys/types.h>
> #endif
> #if HAVE_SYS_STAT_H
> # include <sys/stat.h>
> #endif
> #if STDC_HEADERS
> # include <stdlib.h>
> # include <stddef.h>
> #else
> # if HAVE_STDLIB_H
> #  include <stdlib.h>
> # endif
> #endif
> #if HAVE_STRING_H
> # if !STDC_HEADERS && HAVE_MEMORY_H
> #  include <memory.h>
> # endif
> # include <string.h>
> #endif
> #if HAVE_STRINGS_H
> # include <strings.h>
> #endif
> #if HAVE_INTTYPES_H
> # include <inttypes.h>
> #else
> # if HAVE_STDINT_H
> #  include <stdint.h>
> # endif
> #endif
> #if HAVE_UNISTD_H
> # include <unistd.h>
> #endif
> #include <stdint.h>
> configure:8017: result: no
> configure:7986: checking for unistd.h
> configure:7998: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8001: $? = 0
> configure:8004: test -s conftest.o
> configure:8007: $? = 0
> configure:8017: result: yes
> configure:8027: checking for off_t
> configure:8048: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8051: $? = 0
> configure:8054: test -s conftest.o
> configure:8057: $? = 0
> configure:8067: result: yes
> configure:8079: checking for size_t
> configure:8100: cc -c -O -pipe -march=pentiumpro -I/usr/local/include conftest.c >&5
> configure:8103: $? = 0
> configure:8106: test -s conftest.o
> configure:8109: $? = 0
> configure:8119: result: yes
> configure:8133: checking for working alloca.h
> configure:8151: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8140: alloca.h: No such file or directory
> configure:8154: $? = 1
> configure: failed program was:
> #line 8139 "configure"
> #include "confdefs.h"
> #include <alloca.h>
> int
> main ()
> {
> char *p = (char *) alloca (2 * sizeof (int));
>   ;
>   return 0;
> }
> configure:8170: result: no
> configure:8180: checking for alloca
> configure:8218: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8221: $? = 0
> configure:8224: test -s conftest
> configure:8227: $? = 0
> configure:8237: result: yes
> configure:8421: checking for stdlib.h
> configure:8456: result: yes
> configure:8421: checking for unistd.h
> configure:8456: result: yes
> configure:8469: checking for getpagesize
> configure:8506: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8509: $? = 0
> configure:8512: test -s conftest
> configure:8515: $? = 0
> configure:8525: result: yes
> configure:8535: checking for working mmap
> configure:8671: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8674: $? = 0
> configure:8676: ./conftest
> configure:8679: $? = 0
> configure:8691: result: yes
> configure:8706: checking for argz.h
> configure:8716: cc -E -I/usr/local/include conftest.c
> configure:8713: argz.h: No such file or directory
> configure:8722: $? = 1
> configure: failed program was:
> #line 8712 "configure"
> #include "confdefs.h"
> #include <argz.h>
> configure:8741: result: no
> configure:8706: checking for limits.h
> configure:8716: cc -E -I/usr/local/include conftest.c
> configure:8722: $? = 0
> configure:8741: result: yes
> configure:8706: checking for locale.h
> configure:8716: cc -E -I/usr/local/include conftest.c
> configure:8722: $? = 0
> configure:8741: result: yes
> configure:8706: checking for nl_types.h
> configure:8716: cc -E -I/usr/local/include conftest.c
> configure:8722: $? = 0
> configure:8741: result: yes
> configure:8706: checking for malloc.h
> configure:8716: cc -E -I/usr/local/include conftest.c
> In file included from configure:8713:
> /usr/include/malloc.h:2: warning: #warning "this file includes <malloc.h> which is deprecated, use <stdlib.h> instead"
> configure:8722: $? = 0
> configure:8741: result: yes
> configure:8706: checking for string.h
> configure:8741: result: yes
> configure:8706: checking for unistd.h
> configure:8741: result: yes
> configure:8706: checking for sys/param.h
> configure:8716: cc -E -I/usr/local/include conftest.c
> configure:8722: $? = 0
> configure:8741: result: yes
> configure:8755: checking for getcwd
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for munmap
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for putenv
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for setenv
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for setlocale
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for strchr
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for strcasecmp
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for strdup
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8795: $? = 0
> configure:8798: test -s conftest
> configure:8801: $? = 0
> configure:8811: result: yes
> configure:8755: checking for __argz_count
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> /tmp/ccFsxSgK.o: In function `main':
> /tmp/ccFsxSgK.o(.text+0x9): undefined reference to `__argz_count'
> configure:8795: $? = 1
> configure: failed program was:
> #line 8761 "configure"
> #include "confdefs.h"
> /* System header to define __stub macros and hopefully few prototypes,
>     which can conflict with char __argz_count (); below.  */
> #include <assert.h>
> /* Override any gcc2 internal prototype to avoid an error.  */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
>    builtin and then its argument prototype would still apply.  */
> char __argz_count ();
> char (*f) ();
> 
> int
> main ()
> {
> /* The GNU C library defines this for functions which it implements
>     to always fail with ENOSYS.  Some functions are actually named
>     something starting with __ and the normal name is an alias.  */
> #if defined (__stub___argz_count) || defined (__stub_____argz_count)
> choke me
> #else
> f = __argz_count;
> #endif
> 
>   ;
>   return 0;
> }
> configure:8811: result: no
> configure:8755: checking for __argz_stringify
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> /tmp/ccmQOFwW.o: In function `main':
> /tmp/ccmQOFwW.o(.text+0x9): undefined reference to `__argz_stringify'
> configure:8795: $? = 1
> configure: failed program was:
> #line 8761 "configure"
> #include "confdefs.h"
> /* System header to define __stub macros and hopefully few prototypes,
>     which can conflict with char __argz_stringify (); below.  */
> #include <assert.h>
> /* Override any gcc2 internal prototype to avoid an error.  */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
>    builtin and then its argument prototype would still apply.  */
> char __argz_stringify ();
> char (*f) ();
> 
> int
> main ()
> {
> /* The GNU C library defines this for functions which it implements
>     to always fail with ENOSYS.  Some functions are actually named
>     something starting with __ and the normal name is an alias.  */
> #if defined (__stub___argz_stringify) || defined (__stub_____argz_stringify)
> choke me
> #else
> f = __argz_stringify;
> #endif
> 
>   ;
>   return 0;
> }
> configure:8811: result: no
> configure:8755: checking for __argz_next
> configure:8792: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> /tmp/cctxmFXh.o: In function `main':
> /tmp/cctxmFXh.o(.text+0x9): undefined reference to `__argz_next'
> configure:8795: $? = 1
> configure: failed program was:
> #line 8761 "configure"
> #include "confdefs.h"
> /* System header to define __stub macros and hopefully few prototypes,
>     which can conflict with char __argz_next (); below.  */
> #include <assert.h>
> /* Override any gcc2 internal prototype to avoid an error.  */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
>    builtin and then its argument prototype would still apply.  */
> char __argz_next ();
> char (*f) ();
> 
> int
> main ()
> {
> /* The GNU C library defines this for functions which it implements
>     to always fail with ENOSYS.  Some functions are actually named
>     something starting with __ and the normal name is an alias.  */
> #if defined (__stub___argz_next) || defined (__stub_____argz_next)
> choke me
> #else
> f = __argz_next;
> #endif
> 
>   ;
>   return 0;
> }
> configure:8811: result: no
> configure:8822: checking for LC_MESSAGES
> configure:8840: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> configure:8843: $? = 0
> configure:8846: test -s conftest
> configure:8849: $? = 0
> configure:8859: result: yes
> configure:8879: checking for libintl.h
> configure:8889: cc -E -I/usr/local/include conftest.c
> configure:8895: $? = 0
> configure:8914: result: yes
> configure:8917: checking for dgettext in libc
> configure:8935: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  >&5
> /tmp/cc7Rm26A.o: In function `main':
> /tmp/cc7Rm26A.o(.text+0x14): undefined reference to `dgettext'
> configure:8938: $? = 1
> configure: failed program was:
> #line 8923 "configure"
> #include "confdefs.h"
> #include <libintl.h>
> int
> main ()
> {
> return (int) dgettext ("","")
>   ;
>   return 0;
> }
> configure:8954: result: no
> configure:8958: checking for bindtextdomain in -lintl
> configure:8985: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lintl   >&5
> /usr/lib/libc.so.4: WARNING!  setkey(3) not present in the system!
> /usr/lib/libc.so.4: warning: this program uses gets(), which is unsafe.
> /usr/lib/libc.so.4: warning: mktemp() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: WARNING!  des_setkey(3) not present in the system!
> /usr/lib/libc.so.4: WARNING!  encrypt(3) not present in the system!
> /usr/lib/libc.so.4: warning: tmpnam() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: warning: this program uses f_prealloc(), which is not recommended.
> /usr/lib/libc.so.4: WARNING!  des_cipher(3) not present in the system!
> /usr/lib/libc.so.4: warning: tempnam() possibly used unsafely; consider using mkstemp()
> configure:8988: $? = 0
> configure:8991: test -s conftest
> configure:8994: $? = 0
> configure:9005: result: yes
> configure:9008: checking for dgettext in libintl
> configure:9013: checking for dgettext in -lintl
> configure:9040: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c -lintl   >&5
> /usr/lib/libc.so.4: WARNING!  setkey(3) not present in the system!
> /usr/lib/libc.so.4: warning: this program uses gets(), which is unsafe.
> /usr/lib/libc.so.4: warning: mktemp() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: WARNING!  des_setkey(3) not present in the system!
> /usr/lib/libc.so.4: WARNING!  encrypt(3) not present in the system!
> /usr/lib/libc.so.4: warning: tmpnam() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: warning: this program uses f_prealloc(), which is not recommended.
> /usr/lib/libc.so.4: WARNING!  des_cipher(3) not present in the system!
> /usr/lib/libc.so.4: warning: tempnam() possibly used unsafely; consider using mkstemp()
> configure:9043: $? = 0
> configure:9046: test -s conftest
> configure:9049: $? = 0
> configure:9060: result: yes
> configure:9069: result: yes
> configure:9088: checking for msgfmt
> configure:9115: result: /usr/local/bin/msgfmt
> configure:9126: checking for dcgettext
> configure:9163: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  -lintl >&5
> /usr/lib/libc.so.4: WARNING!  setkey(3) not present in the system!
> /usr/lib/libc.so.4: warning: this program uses gets(), which is unsafe.
> /usr/lib/libc.so.4: warning: mktemp() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: WARNING!  des_setkey(3) not present in the system!
> /usr/lib/libc.so.4: WARNING!  encrypt(3) not present in the system!
> /usr/lib/libc.so.4: warning: tmpnam() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: warning: this program uses f_prealloc(), which is not recommended.
> /usr/lib/libc.so.4: WARNING!  des_cipher(3) not present in the system!
> /usr/lib/libc.so.4: warning: tempnam() possibly used unsafely; consider using mkstemp()
> configure:9166: $? = 0
> configure:9169: test -s conftest
> configure:9172: $? = 0
> configure:9182: result: yes
> configure:9194: checking for gmsgfmt
> configure:9223: result: /usr/local/bin/msgfmt
> configure:9232: checking for xgettext
> configure:9259: result: /usr/local/bin/xgettext
> configure:9280: cc -o conftest -O -pipe -march=pentiumpro -I/usr/local/include -L/usr/local/lib -pthread conftest.c  -lintl >&5
> /usr/lib/libc.so.4: WARNING!  setkey(3) not present in the system!
> /usr/lib/libc.so.4: warning: this program uses gets(), which is unsafe.
> /usr/lib/libc.so.4: warning: mktemp() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: WARNING!  des_setkey(3) not present in the system!
> /usr/lib/libc.so.4: WARNING!  encrypt(3) not present in the system!
> /usr/lib/libc.so.4: warning: tmpnam() possibly used unsafely; consider using mkstemp()
> /usr/lib/libc.so.4: warning: this program uses f_prealloc(), which is not recommended.
> /usr/lib/libc.so.4: WARNING!  des_cipher(3) not present in the system!
> /usr/lib/libc.so.4: warning: tempnam() possibly used unsafely; consider using mkstemp()
> configure:9283: $? = 0
> configure:9286: test -s conftest
> configure:9289: $? = 0
> configure:9352: checking for catalogs to be installed
> configure:9361: result:  az bg da de el es fi fr ga gl hu it ja ko lv ms nl nn no pl pt pt_BR ro ru sk sl sv ta tr uk pl zh_CN zh_TW
> configure:9445: checking for pkg-config
> configure:9462: found /usr/local/bin/pkg-config
> configure:9474: result: /usr/local/bin/pkg-config
> configure:9491: checking for 	gmodule-2.0 >= 2.0.1 	ORBit-2.0 >= 2.3.108
> configure:9501: result: yes
> configure:9505: checking BONOBO_ACTIVATION_CFLAGS
> configure:9510: result:          -D_REENTRANT -D_THREAD_SAFE        -DORBIT2=1 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/orbit-2.0 -I/usr/local/include/linc-1.0  
> configure:9513: checking BONOBO_ACTIVATION_LIBS
> configure:9518: result:    -Wl,--export-dynamic         -pthread        -Wl,--export-dynamic    -pthread  -Wl,--export-dynamic  -L/usr/local/lib -lORBit-2 -lm -llinc -lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lglib-2.0 -lintl -liconv  
> configure:9600: checking for 	gmodule-2.0 >= 2.0.1 	ORBit-2.0 >= 2.3.108 	ORBit-CosNaming-2.0 >= 2.3.108 	libxml-2.0 >= 2.4.20
> configure:9661: error: Library requirements (	gmodule-2.0 >= 2.0.1 	ORBit-2.0 >= 2.3.108 	ORBit-CosNaming-2.0 >= 2.3.108 	libxml-2.0 >= 2.4.20) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
> 
> ## ----------------- ##
> ## Cache variables.  ##
> ## ----------------- ##
> 
> ac_cv_type_size_t='yes'
> ac_cv_path_XGETTEXT='/usr/local/bin/xgettext'
> ac_cv_func_getcwd='yes'
> ac_cv_lib_fl_yywrap='yes'
> gt_cv_func_dgettext_libc='no'
> ac_cv_header_stdlib_h='yes'
> lt_cv_file_magic_cmd='$MAGIC_CMD'
> ac_cv_header_nl_types_h='yes'
> ac_cv_lib_cposix_strerror='no'
> ac_cv_prog_cc_g='yes'
> ac_cv_path_INTLTOOL_PERL='/usr/bin/perl'
> ac_cv_env_LDFLAGS_set='set'
> ac_cv_path_PKG_CONFIG='/usr/local/bin/pkg-config'
> lt_cv_prog_cc_can_build_shared='yes'
> ac_cv_c_compiler_gnu='yes'
> ac_cv_env_CFLAGS_set='set'
> ac_cv_func_setlocale='yes'
> ac_cv_func_mmap_fixed_mapped='yes'
> ac_cv_prog_make_gmake_set='yes'
> ac_cv_env_CPP_value=''
> ac_cv_env_CPPFLAGS_set='set'
> ac_cv_func_strcasecmp='yes'
> lt_cv_prog_cc_static_works='yes'
> lt_cv_prog_cc_no_builtin=''
> lt_cv_prog_cc_shlib=''
> ac_cv_func___argz_count='no'
> lt_cv_prog_cc_static='-static'
> ac_cv_env_host_alias_set=''
> ac_cv_path_GMSGFMT='/usr/local/bin/msgfmt'
> ac_cv_c_const='yes'
> ac_cv_prog_YACC='bison -y'
> lt_cv_ld_reload_flag='-r'
> ac_cv_working_alloca_h='no'
> lt_cv_sys_path_separator=':'
> ac_cv_func_munmap='yes'
> ac_cv_header_sys_stat_h='yes'
> ac_cv_prog_lex_root='lex.yy'
> lt_cv_archive_cmds_need_lc='yes'
> lt_cv_prog_gnu_ld='yes'
> ac_cv_env_build_alias_set=''
> ac_cv_header_limits_h='yes'
> ac_cv_env_LDFLAGS_value='-L/usr/local/lib -pthread'
> ac_cv_env_target_alias_set='set'
> ac_cv_func_alloca_works='yes'
> ac_cv_prog_cc_stdc=''
> ac_cv_host_alias='i386-unknown-freebsd4.5'
> ac_cv_env_CFLAGS_value='-O -pipe -march=pentiumpro'
> ac_cv_env_CC_set='set'
> ac_cv_path_MSGFMT='/usr/local/bin/msgfmt'
> ac_cv_header_sys_types_h='yes'
> ac_cv_header_stdc='yes'
> lt_cv_prog_cc_wl='-Wl,'
> ac_cv_func___argz_stringify='no'
> ac_cv_header_strings_h='yes'
> ac_cv_func_dcgettext='yes'
> ac_cv_header_stdint_h='no'
> ac_cv_header_inttypes_h='yes'
> nls_cv_header_intl=''
> ac_cv_func___argz_next='no'
> ac_cv_func_setenv='yes'
> ac_cv_header_sys_param_h='yes'
> ac_cv_header_locale_h='yes'
> ac_cv_header_unistd_h='yes'
> ac_cv_header_string_h='yes'
> ac_cv_c_inline='inline'
> lt_cv_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern char \1;/p'\'''
> lt_cv_path_LD='/usr/libexec/elf/ld'
> ac_cv_build_alias='i386-unknown-freebsd4.5'
> ac_cv_env_CPPFLAGS_value='-I/usr/local/include'
> ac_cv_func_strchr='yes'
> ac_cv_header_memory_h='yes'
> ac_cv_prog_ac_ct_RANLIB='ranlib'
> ac_cv_prog_ac_ct_STRIP='strip'
> ac_cv_host='i386-unknown-freebsd4.5'
> ac_cv_env_host_alias_value=''
> am_cv_val_LC_MESSAGES='yes'
> ac_cv_type_off_t='yes'
> ac_cv_lib_intl_dgettext='yes'
> nls_cv_force_use_gnu_gettext='no'
> lt_cv_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr) \&\2},/p'\'''
> gt_cv_func_dgettext_libintl='yes'
> ac_cv_lib_intl_bindtextdomain='yes'
> lt_cv_compiler_c_o='yes'
> lt_cv_prog_cc_pic_works='yes'
> lt_cv_file_magic_test_file=''
> nls_cv_use_gnu_gettext='no'
> ac_cv_header_argz_h='no'
> ac_cv_prog_CPP='cc -E'
> ac_cv_build='i386-unknown-freebsd4.5'
> ac_cv_env_build_alias_value=''
> ac_cv_header_malloc_h='yes'
> ac_cv_func_getpagesize='yes'
> ac_cv_prog_lex_yytext_pointer='yes'
> lt_cv_prog_cc_pic=' -fPIC'
> lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\'''
> lt_cv_deplibs_check_method='pass_all'
> ac_cv_prog_ac_ct_CC='cc'
> ac_cv_header_libintl_h='yes'
> lt_cv_compiler_o_lo='yes'
> ac_cv_env_target_alias_value='i386-unknown-freebsd4.5'
> ac_cv_env_CC_value='cc'
> lt_cv_path_NM='/usr/bin/nm -B'
> ac_cv_env_CPP_set=''
> ac_cv_header_dlfcn_h='yes'
> nls_cv_header_libgt=''
> ac_cv_func_strdup='yes'
> ac_cv_func_putenv='yes'
> ac_cv_prog_LEX='flex'
> ac_cv_objext='o'
> 
> ## ------------ ##
> ## confdefs.h.  ##
> ## ------------ ##
> 
> #define PACKAGE "bonobo-activation"
> #define VERSION "0.9.8"
> #define HAVE_DLFCN_H 1
> #define YYTEXT_POINTER 1
> #define GETTEXT_PACKAGE "bonobo-activation"
> #define STDC_HEADERS 1
> #define HAVE_SYS_TYPES_H 1
> #define HAVE_SYS_STAT_H 1
> #define HAVE_STDLIB_H 1
> #define HAVE_STRING_H 1
> #define HAVE_MEMORY_H 1
> #define HAVE_STRINGS_H 1
> #define HAVE_INTTYPES_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_ALLOCA 1
> #define HAVE_STDLIB_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_GETPAGESIZE 1
> #define HAVE_MMAP 1
> #define HAVE_LIMITS_H 1
> #define HAVE_LOCALE_H 1
> #define HAVE_NL_TYPES_H 1
> #define HAVE_MALLOC_H 1
> #define HAVE_STRING_H 1
> #define HAVE_UNISTD_H 1
> #define HAVE_SYS_PARAM_H 1
> #define HAVE_GETCWD 1
> #define HAVE_MUNMAP 1
> #define HAVE_PUTENV 1
> #define HAVE_SETENV 1
> #define HAVE_SETLOCALE 1
> #define HAVE_STRCHR 1
> #define HAVE_STRCASECMP 1
> #define HAVE_STRDUP 1
> #define HAVE_LC_MESSAGES 1
> #define HAVE_GETTEXT 1
> #define HAVE_DCGETTEXT 1
> #define ENABLE_NLS 1
> 
> 
> configure: exit 1
-- 
PGP Key: http://www.marcuscom.com/pgp.asc


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-gnome" in the body of the message



home | help

Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1021669590.578.127.camel>