Date: Fri, 23 Nov 2001 09:26:27 -0200 From: =?iso-8859-1?Q?Jos=E9?= Romildo Malaquias <romildo@uber.com.br> To: freebsd-questions@freebsd.org Cc: romildo@uber.com.br Subject: Error building custom kernel Message-ID: <3BFE3263.1DA8F26A@uber.com.br>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------F58641E89A8E5F4A1CB8948D
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Hello.
After installing FreeBSD 4-4 on my Pentium II computer, I am in the
process of configuring the system. In order to have support for ext2
filesystems and my sound card, I have to compile a custom kernel. After
reading the relevant chapters of the handbook, I have edited a kernel
configuration file and tried building the kernel. Unfortunatly it stoped
with an error message. Being a novice FreeBSD user (althoug having used
Linux for some time now), I am not able to figure out what the problem
is and how to solve it. The kernel configuraion file
(/usr/src/sys/i386/conf/MYKERNEL) and the output of the building command
# make building KERNCONF=MYKERNEL
are attached to this message.
Any clues?
Romildo
--
Prof. José Romildo Malaquias Departamento de Computação
http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto
romildo@iceb.ufop.br Brasil
romildo@uber.com.br
--------------F58641E89A8E5F4A1CB8948D
Content-Type: text/plain; charset=us-ascii;
name="MYKERNEL"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="MYKERNEL"
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.34 2001/08/12 13:13:46 joerg Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident MYKERNEL
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device dpt # DPT Smartcache - See LINT for options!
device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# For PnP/PCI sound cards
device pcm
# For non-PnP ISA cards:
device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
# Add support for the EXT2FS filesystem of Linux fame. Be a bit
# careful with this - the ext2fs code has a tendency to lag behind
# changes and not be exercised very much, so mounting read/write could
# be dangerous (and even mounting read only could result in panics.)
#
options EXT2FS
--------------F58641E89A8E5F4A1CB8948D
Content-Type: text/plain; charset=us-ascii;
name="MYKERNEL.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="MYKERNEL.log"
--------------------------------------------------------------
>>> Kernel build for MYKERNEL started on Fri Nov 23 07:14:25 BRST 2001
--------------------------------------------------------------
===> MYKERNEL
mkdir -p /usr/obj/usr/src/sys
cd /usr/src/sys/i386/conf; PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin config -d /usr/obj/usr/src/sys/MYKERNEL MYKERNEL
Don't forget to do a ``make depend''
Kernel build directory is /usr/obj/usr/src/sys/MYKERNEL
[...]
=2 ioconf.c
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/../include -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 config.c
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/../include -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 setdef1.c
touch hack.c
cc -elf -shared -nostdlib hack.c -o hack.So
rm -f hack.c
sh /usr/src/sys/conf/newvers.sh MYKERNEL
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/../include -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 vers.c
linking kernel
asr.o: In function `ASR_failActiveCommands':
asr.o(.text+0x6e7): undefined reference to `xpt_done'
asr.o: In function `ASR_rescan':
asr.o(.text+0xba0): undefined reference to `xpt_create_path'
asr.o(.text+0xbe8): undefined reference to `xpt_async'
asr.o(.text+0xc0a): undefined reference to `xpt_setup_ccb'
asr.o(.text+0xc2a): undefined reference to `xpt_async'
asr.o(.text+0xc3c): undefined reference to `xpt_async'
asr.o(.text+0xcab): undefined reference to `xpt_async'
asr.o(.text+0xcce): undefined reference to `xpt_async'
asr.o(.text+0xcf1): undefined reference to `xpt_async'
asr.o: In function `ASR_reset':
asr.o(.text+0xda9): undefined reference to `xpt_path_sim'
asr.o: In function `asr_timeout':
asr.o(.text+0xdf8): undefined reference to `xpt_path_sim'
asr.o(.text+0xed3): undefined reference to `xpt_path_sim'
asr.o(.text+0xeeb): undefined reference to `xpt_async'
asr.o: In function `ASR_init_message':
asr.o(.text+0x1531): undefined reference to `xpt_path_sim'
asr.o: In function `asr_attach':
asr.o(.text+0x26b6): undefined reference to `cam_simq_alloc'
asr.o(.text+0x26de): undefined reference to `cam_sim_alloc'
asr.o(.text+0x26fb): undefined reference to `xpt_bus_register'
asr.o(.text+0x270c): undefined reference to `cam_sim_free'
asr.o(.text+0x2737): undefined reference to `xpt_create_path'
asr.o(.text+0x274a): undefined reference to `xpt_bus_deregister'
asr.o(.text+0x2754): undefined reference to `cam_sim_free'
asr.o: In function `asr_action':
asr.o(.text+0x28a3): undefined reference to `xpt_path_sim'
asr.o(.text+0x2a8e): undefined reference to `xpt_done'
asr.o(.text+0x2a9d): undefined reference to `xpt_done'
asr.o: In function `asr_intr':
asr.o(.text+0x2cc1): undefined reference to `xpt_done'
asr.o: In function `ASR_queue_i':
asr.o(.text+0x340a): undefined reference to `xpt_path_sim'
dpt_scsi.o: In function `dptexecuteccb':
dpt_scsi.o(.text+0x71f): undefined reference to `xpt_freeze_devq'
dpt_scsi.o(.text+0x7a4): undefined reference to `xpt_done'
dpt_scsi.o(.text+0x8ec): undefined reference to `xpt_done'
dpt_scsi.o(.text+0xa10): undefined reference to `xpt_done'
dpt_scsi.o: In function `dpt_action':
dpt_scsi.o(.text+0xa47): undefined reference to `xpt_print_path'
dpt_scsi.o(.text+0xb70): undefined reference to `xpt_freeze_simq'
dpt_scsi.o(.text+0xd86): undefined reference to `xpt_freeze_simq'
dpt_scsi.o(.text+0xf8b): undefined reference to `xpt_done'
dpt_scsi.o(.text+0xf9d): undefined reference to `xpt_done'
dpt_scsi.o: In function `dpt_attach':
dpt_scsi.o(.text+0x176d): undefined reference to `cam_simq_alloc'
dpt_scsi.o(.text+0x179f): undefined reference to `xpt_bus_deregister'
dpt_scsi.o(.text+0x17b5): undefined reference to `cam_sim_free'
dpt_scsi.o(.text+0x1800): undefined reference to `cam_sim_alloc'
dpt_scsi.o(.text+0x1817): undefined reference to `xpt_bus_register'
dpt_scsi.o(.text+0x1841): undefined reference to `xpt_create_path'
dpt_scsi.o: In function `dpt_intr':
dpt_scsi.o(.text+0x1b91): undefined reference to `xpt_done'
dpt_scsi.o: In function `dptprocesserror':
dpt_scsi.o(.text+0x1d05): undefined reference to `xpt_done'
dpt_scsi.o: In function `dpttimeout':
dpt_scsi.o(.text+0x1d2a): undefined reference to `xpt_print_path'
dpt_scsi.o(.text+0x1d54): undefined reference to `xpt_print_path'
mly_cam.o: In function `mly_cam_attach':
mly_cam.o(.text+0x42): undefined reference to `cam_simq_alloc'
mly_cam.o(.text+0x5d): undefined reference to `cam_simq_free'
mly_cam.o(.text+0xce): undefined reference to `cam_sim_alloc'
mly_cam.o(.text+0x132): undefined reference to `cam_sim_alloc'
mly_cam.o(.text+0x174): undefined reference to `xpt_bus_register'
mly_cam.o: In function `mly_cam_detach':
mly_cam.o(.text+0x1e0): undefined reference to `xpt_bus_deregister'
mly_cam.o(.text+0x1f4): undefined reference to `cam_sim_free'
mly_cam.o: In function `mly_cam_action':
mly_cam.o(.text+0x525): undefined reference to `xpt_done'
mly_cam.o: In function `mly_cam_complete':
mly_cam.o(.text+0x905): undefined reference to `xpt_done'
mly_cam.o: In function `mly_find_periph':
mly_cam.o(.text+0x943): undefined reference to `xpt_create_path'
mly_cam.o(.text+0x955): undefined reference to `cam_periph_find'
mly_cam.o(.text+0x95f): undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_attach_sim':
umass.o(.text+0x1257): undefined reference to `cam_simq_alloc'
umass.o(.text+0x127d): undefined reference to `cam_sim_alloc'
umass.o(.text+0x1296): undefined reference to `xpt_bus_register'
umass.o(.text+0x12a6): undefined reference to `cam_simq_free'
umass.o: In function `umass_cam_rescan_callback':
umass.o(.text+0x12bf): undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_rescan':
umass.o(.text+0x1309): undefined reference to `xpt_periph'
umass.o(.text+0x1312): undefined reference to `xpt_create_path'
umass.o(.text+0x1325): undefined reference to `xpt_setup_ccb'
umass.o(.text+0x1340): undefined reference to `xpt_action'
umass.o: In function `umass_cam_detach_sim':
umass.o(.text+0x13f7): undefined reference to `xpt_bus_deregister'
umass.o(.text+0x1415): undefined reference to `cam_sim_free'
umass.o: In function `umass_cam_detach':
umass.o(.text+0x1456): undefined reference to `xpt_create_path'
umass.o(.text+0x1477): undefined reference to `xpt_async'
umass.o(.text+0x147f): undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_action':
umass.o(.text+0x179d): undefined reference to `xpt_done'
umass.o(.text+0x17ad): undefined reference to `xpt_done'
umass.o: In function `umass_cam_cb':
umass.o(.text+0x18a1): undefined reference to `xpt_done'
umass.o: In function `umass_cam_sense_cb':
umass.o(.text+0x1918): undefined reference to `xpt_done'
umass.o(.text+0x1929): undefined reference to `xpt_done'
*** Error code 1
Stop in /usr/obj/usr/src/sys/MYKERNEL.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
--------------F58641E89A8E5F4A1CB8948D--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BFE3263.1DA8F26A>