Date: Sun, 16 Oct 2005 11:45:34 -0400 (EDT) From: Bruce Walker <bmw@borderware.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: usb/87519: cannot install on USB-only system Message-ID: <20051016154534.15F831703F@mxedge.home.wezel.com> Resent-Message-ID: <200510161550.j9GFoFcO056782@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 87519 >Category: usb >Synopsis: cannot install on USB-only system >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Oct 16 15:50:15 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Bruce Walker >Release: FreeBSD 6.0-BETA5 i386 >Organization: Borderware Technologies Inc. >Environment: System: FreeBSD mxedge.home.wezel.com 6.0-BETA5 FreeBSD 6.0-BETA5 #0: Mon Sep 19 00:12:45 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386 System is a Portwell NAR 2054. It has no accessible PS/2 ports at all, just two USB ports. Keyboard is a standard Apple USB keyboard. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA5 #0: Mon Sep 19 00:12:45 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: VIA C3 Nehemiah+RNG (997.46-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x693 Stepping = 3 Features=0x380b13d<FPU,DE,PSE,TSC,MSR,CX8,MTRR,PGE,CMOV,MMX,FXSR,SSE> real memory = 260046848 (248 MB) avail memory = 245014528 (233 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.4 (no driver attached) re0: <RealTek 8139C+ 10/100BaseTX> port 0xdc00-0xdcff mem 0xe7000000-0xe70000ff irq 5 at device 9.0 on pci0 miibus0: <MII bus> on re0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: Ethernet address: 00:90:fb:04:5a:7e re1: <RealTek 8139C+ 10/100BaseTX> port 0xe000-0xe0ff mem 0xe7001000-0xe70010ff irq 10 at device 10.0 on pci0 miibus1: <MII bus> on re1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re1: Ethernet address: 00:90:fb:04:5a:7d re2: <RealTek 8139C+ 10/100BaseTX> port 0xe400-0xe4ff mem 0xe7002000-0xe70020ff irq 11 at device 11.0 on pci0 miibus2: <MII bus> on re2 rlphy2: <RealTek internal media interface> on miibus2 rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re2: Ethernet address: 00:90:fb:04:5a:7c pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) uhub1: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2 uhub1: 3 ports with 2 removable, bus powered ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/1 kbd1 at ukbd0 uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/1 Timecounter "TSC" frequency 997463205 Hz quality 800 Timecounters tick every 1.000 msec acd0: CDROM <ASUS CD-S400/A/V2.0S> at ata0-master UDMA33 ad2: 19077MB <IBM DJSA-220 JS4OAC2A> at ata1-master UDMA66 Trying to mount root from ufs:/dev/ad2s1a IP Filter: v4.1.8 initialized. Default = pass all, Logging = enabled re0: promiscuous mode enabled re1: promiscuous mode enabled >Description: Attempted to install FreeBSD 6.0 RC1 on a Portwell system using attached CDROM. The BIOS works with the USB keyboard, but none of the FreeBSD prompts see it. There's no way to accomplish the install because you cannot select any menu choices. Earlier, I tried the same install on a Dell system using a Dell USB keyboard without luck. (I finally installed this Portwell by moving the HDD to a Thinkpad notebook and installing there, then replacing the HDD.) >How-To-Repeat: Attache a USB keyboard, remove any PS/2 keyboard (if connector available), attempt install. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051016154534.15F831703F>