Date: Fri, 21 Jun 2002 15:24:47 -0600 From: "jogegabsd" <jogegabsd@myrealbox.com> To: <freebsd-questions@freebsd.org> Subject: APM not even a sign Message-ID: <GIEELJEJOBIMBIMFKPNKGEFLCEAA.jogegabsd@myrealbox.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hello all. I'm trying to run apm on my laptop with 4.6-RELEASE.
Now I had also this problem with 4.5-RELEASE.
I reconfigure my kernel from this
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
to this
device apm0 at nexus? flags 0x20 # Advanced Power Management
Recompile and reboot. But the result is the same, no apm.
When I try to run apmd it says that device is not configured.
I check /dev/ and I hace apm and apmctl. seems to work ok
I have no idea what is wrong, If someone with the same problem could
help me please.
I'm attaching my dmesg in case that's helpful.
Thanks in advance
Gerardo Amaya
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Mon Jun 17 17:07:00 CST 2002
gerardo@:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (996.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267780096 (261504K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 255299584 (249316K bytes)
Preloaded elf kernel "kernel" at 0xc0522000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc052209c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1840-0x185f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: KYE Systems Genius USB Wheel Mouse , rev 1.00/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1860-0x187f irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x14f1, dev=0x2f00) at 4.0
pci2: <unknown card> (vendor=0x104c, dev=0x8023) at 5.0
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 6.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 00:02:a5:99:38:cd
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1800-0x180f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 5
pcm0: <Intel 82801CA (ICH3)> irq 5 at device 31.5 on pci0
pcm0: unable to map IO port space
device_probe_and_attach: pcm0 attach returned 6
eisa0: <EISA bus> on motherboard
eisa0: unknown card @D@0000 (0x00800000) at slot 1
orm0: <Option ROMs> at iomem 0xc0000-0xcdfff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
ad0: 19077MB <TOSHIBA MK2017GAP> [38760/16/63] at ata0-master UDMA100
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2002> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?GIEELJEJOBIMBIMFKPNKGEFLCEAA.jogegabsd>