Date: Tue, 9 May 2017 22:20:58 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: Mike Wolman <mike@wolman.co.uk>, Aleksandr Rybalko <ray@ddteam.net> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: onion omega2+ Message-ID: <5866.49154.qm@web101718.mail.ssk.yahoo.co.jp> In-Reply-To: <6f1b2d35-5d17-765a-6138-0ab85455fc09@wolman.co.uk> References: <694efc3a-e183-35a1-a0bf-9a9c0d708826@wolman.co.uk> <CAJ1Oi8G%2BvTMBX4Ey=H=2WruXDjXjcyte5_n8T3VDdL=h8m7%2BVw@mail.gmail.com> <e92bc818-485f-d9fc-da2b-776bae2b0916@wolman.co.uk> <410144.69078.qm@web101716.mail.ssk.yahoo.co.jp> <fda8b792-f6c4-d0fb-5a99-d190cc3a4f39@wolman.co.uk> <128807.28836.qm@web101715.mail.ssk.yahoo.co.jp> <2d555385-8258-fd75-e4a3-a1e59bf86314@wolman.co.uk> <651873.78746.qm@web101702.mail.ssk.yahoo.co.jp> <CAJ1Oi8Hemuug5JRP9btUgs-MmCFgb-_qS0qrEW7h=BhPAYXpFQ@mail.gmail.com> <2c5cd01a-a8d4-3ffa-4e9c-2aad170574c1@wolman.co.uk> <39222.11970.qm@web101719.mail.ssk.yahoo.co.jp> <6f1b2d35-5d17-765a-6138-0ab85455fc09@wolman.co.uk>
index | next in thread | previous in thread | raw e-mail
Hi. One more. Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage Omega2 # bootm 0x80800000 ----- Original Message ----- > From: Mike Wolman <mike@wolman.co.uk> > To: Mori Hiroki <yamori813@yahoo.co.jp>; Aleksandr Rybalko <ray@ddteam.net> > Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> > Date: 2017/5/9, Tue 22:01 > Subject: Re: onion omega2+ > > > No joy > > Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage > * > * > Reading file "kernel.MT7628_FDT.uImage" > * > ** > ** > ** > ** > ** > ** > ** > ** > ** > ** > ****** > ****** > ****************************************************************************************************************************************************************************************************************** > **** > * > FAT: 5654824 Bytes read > Omega2 # bootm > ## Booting image at 80100000 ... > Bad Magic Number,CE6AE7C4 > > I am going to get a different usb memory stick and rebuild the kernel > later on as i got an error when last writing to the usb memory key and > its quite old now so just want to eliminate it from testing. > > > On 09/05/2017 13:52, Mori Hiroki wrote: >> Hi. >> >> This is my sample operation get image from network and boot. >> >> RT3052 # tftpboot 0x80800000 Planex_MZK-WNH_kernel.kbin.oldlzma.uboot >> RT3052 # bootm >> >> >> I don't use USB support U-Boot. But I think fatload command argument is >> temporary memory address not kernel address. >> >> How about this. >> >> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage >> Omega2 # bootm >> >> ----- Original Message ----- >>> From: Mike Wolman <mike@wolman.co.uk> >>> To: Aleksandr Rybalko <ray@ddteam.net>; Mori Hiroki > <yamori813@yahoo.co.jp> >>> Cc: "freebsd-mips@freebsd.org" > <freebsd-mips@freebsd.org> >>> Date: 2017/5/9, Tue 20:48 >>> Subject: Re: onion omega2+ >>> >>> >>> >>> >>> Is it possible to exclude the compression of the kernel/image for >> now eg: >>> mkimage -A mips -C none -O linux -T kernel -a 0x80001000 -e >> 0x80001100 -n "FreeBSD" -d kernel.MT7628_FDT >> kernel.MT7628_FDT.uImage >>> >>> I have just tried the above but when booting I get a Bad Magic >> Number. >>> >>> Omega2 # fatload usb 0:1 0x80001000 kernel.MT7628_FDT.uImage >>> * >>> * >>> Reading file "kernel.MT7628_FDT.uImage" >>> * >>> ** >>> ** >>> ** >>> ** >>> ** >>> ** >>> ** >>> ** >>> ** >>> ** >>> ****** >>> ****** >>> > ****************************************************************************************************************************************************************************************************************** >>> **** >>> * >>> FAT: 5654824 Bytes read >>> Omega2 # bootm 0x80001100 >>> ## Booting image at 80001100 ... >>> Bad Magic Number,1C994480 >>> Omega2 # >>> >>> >>> I have seen other examples starting a program directly with going to >> the address but this didnt work either: >>> Omega2 # go 0x80001100 >>> ## Starting application at 0x80001100 ... >>> >>> omega freezes here. >>> >>> >>> >>> >>> On 09/05/2017 10:12, Aleksandr Rybalko wrote: >>> >>> Fix things in order :) >> Currently you have problem with LZMA, serial port later. >>>> >> So, find version of lzma used to build linux firmware, MIPS routers world > use about 5 incompatible versions. One of them, you can find here: >>>> > http://project.zrouter.org/hg/zrouter/file/9ac53695a44d/tools/oldlzma >>>> >>>> >>>> >>>> >>>> 2017-05-09 7:03 GMT+03:00 Mori Hiroki > <yamori813@yahoo.co.jp>: >>>> >>>> Hi Mike >>>>> Could you show u-boot printenv command result. >>>>> >>>>> Thanks >>>>> >>>>> >>>>> ----- Original Message ----- >>>>>> From: Mike Wolman <mike@wolman.co.uk> >>>>>> To: Mori Hiroki <yamori813@yahoo.co.jp>; > "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >>>>>> Cc: >>>>>> Date: 2017/5/9, Tue 10:30 >>>>>> Subject: Re: onion omega2+ >>>>>> >>>>>> Hi Mori, >>>>>> >>>>>> When I compiled the world/kernel etc I used: >>>>>> >>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>> ../freebsd-wifi-build/build/ bin/build ralink >> buildkernel >>>>>> I checked the serial stuff was the same as the >> other configs in: >>>>>> https://github.com/freebsd/ freebsd-wifi-build/ >>>>>> and they looked the same. >>>>>> >>>>>> The OMEGA2.dtsi file has: >>>>>> >>>>>> chosen { >>>>>> bootargs = > "console=ttyS0,115200"; >>>>>> }; >>>>>> >>>>>> >>>>>> And mt7628an.dtsi has: serial0 = &uartlite; >>>>>> >>>>>> I dont think im getting as far as worrying about >> the serial console at >>>>>> the moment and need to get the kernel to uncompress >> first. >>>>>> Mike. >>>>>> >>>>>> >>>>>> On 09/05/2017 02:20, Mori Hiroki wrote: >>>>>>> Hi Mike >>>>>>> >>>>>>> In FreeBSD is use serial0 dts item to console. >>>>>>> >>>>>>> I think good to use this at start. >>>>>>> >>>>>>> freebsd/sys/gnu/dts/mips/ MT7628.dts >>>>>>> >>>>>>> ----- Original Message ----- >>>>>>>> From: Mike Wolman <mike@wolman.co.uk> >>>>>>>> To: Mori Hiroki <yamori813@yahoo.co.jp>; >>>>>> "freebsd-mips@freebsd.org" > <freebsd-mips@freebsd.org> >>>>>>>> Cc: >>>>>>>> Date: 2017/5/9, Tue 09:25 >>>>>>>> Subject: Re: onion omega2+ >>>>>>>> >>>>>>>> Hi Mori, >>>>>>>> >>>>>>>> I grabbed the dts files from: >>>>>>>> >>>>>>>> https://github.com/WereCatf/ > source/tree/image/target/ linux/ramips/dts >>>>>>>> >>>>>> https://github.com/WereCatf/ source/blob/image/target/ > linux/ramips/dts/OMEGA2P.dts >>>>>> https://github.com/WereCatf/ source/blob/image/target/ > linux/ramips/dts/OMEGA2.dtsi >>>>>>>> If this is of any use from the default >> linux install on the flash: >>>>>>>> root@Omega-12BF:/proc# cat /proc/mtd >>>>>>>> dev: size erasesize name >>>>>>>> mtd0: 00030000 00010000 "u-boot" >>>>>>>> mtd1: 00010000 00010000 "u-boot-env" >>>>>>>> mtd2: 00010000 00010000 "factory" >>>>>>>> mtd3: 01fb0000 00010000 "firmware" >>>>>>>> mtd4: 00148842 00010000 "kernel" >>>>>>>> mtd5: 01e677be 00010000 "rootfs" >>>>>>>> mtd6: 01950000 00010000 "rootfs_data" >>>>>>>> >>>>>>>> >>>>>>>> btw after posting i spotted and error in >> what i did with: >>>>>>>> mkimage -A mips -O linux -T kernel -C lzma >> \ >>>>>>>> -a 0x80001000 -e 0x80001100 \ >>>>>>>> -n "FreeBSD" -d >> kernel.MT7628_FDT.lzma >>>>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>>>> >>>>>>>> I have redone this using the correct >> compressed kernel ie: >>>>>>>> mkimage -A mips -O linux -T kernel -C lzma >> \ >>>>>>>> -a 0x80001000 -e 0x80001100 \ >>>>>>>> -n "FreeBSD" -d >> kernel.MT7628_FDT.ulzma >>>>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>>>> >>>>>>>> >>>>>>>> But this didnt work. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 09/05/2017 01:17, Mori Hiroki wrote: >>>>>>>>> Hi. >>>>>>>>> >>>>>>>>> I think if U-Boot work memory make >> broken then >>>>>>>>> Uncompressing Kernel Image is NG. >>>>>>>>> >>>>>>>>> Some ARM U-Boot is use top address >> in work memory. >>>>>>>>> If this case your kernel start >> address to move to >>>>>>>>> after work memory. But I never see >> in MIPS. >>>>>>>>> And What is set FDT_DTS_FILE in >> your kernel configuration ? >>>>>>>>> ----- Original Message ----- >>>>>>>>> >>>>>>>>>> From: Mike Wolman > <mike@wolman.co.uk> >>>>>>>>>> To: freebsd-mips@freebsd.org >>>>>>>>>> Cc: >>>>>>>>>> Date: 2017/5/9, Tue 07:48 >>>>>>>>>> Subject: Re: onion omega2+ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> More info in case anyone can >> point me in the right direction. >>>>>>>>>> I have found: >>>>>>>>>> >>>>>>>>>> https://forum.openwrt.org/ > viewtopic.php?id=53865 >>>>>>>>>> >>>>>>>>>> I have tried changing how lzma >> compresses the kernel by >>>>>> adding -d20 to >>>>>>>>>> the build scripts eg: >>>>>>>>>> >>>>>>>>>> /usr/local/bin/lzma e >>>>>>>>>> >>>>>> /home/mike/omega2/src/../root/ > mipsel_ap/boot/kernel.MT7628_ FDT/kernel >>>>>>>> \ >>>>>>>>>> /home/mike/omega2/src/../ > tftpboot/kernel.MT7628_FDT. lzma >> -d20 >>>>>>>>>> This did not work. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Looking at the onion omega conf >> I see that it uses mkuzip and >>>>>> not lzma >>>>>>>>>> with the following settings: >>>>>>>>>> >>>>>>>>>> X_FSIMAGE_CMD="mkuzip" >>>>>>>>>> X_FSIMAGE_ARGS="-L -d -s 65536 >> -v" >>>>>>>>>> X_FSIMAGE_SUFFIX=".ulzma" >>>>>>>>>> >>>>>>>>>> So tried the following: >>>>>>>>>> >>>>>>>>>> mkuzip -L -d -s 65536 -v -o >> kernel.MT7628_FDT.ulzma >>>>>> kernel.MT7628_FDT >>>>>>>>>> mkimage -A mips -O linux -T >> kernel -C lzma \ >>>>>>>>>> -a 0x80001000 -e 0x80001100 >> \ >>>>>>>>>> -n "FreeBSD" -d >> kernel.MT7628_FDT.lzma >>>>>>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> But this did not work either. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 08/05/2017 19:41, Aleksandr >> Rybalko wrote: >>>>>>>>>>> Hi Mike! >>>>>>>>>>> >>>>>>>>>>> I see you have no "OK" >> after >>>>>> "Uncompressing Kernel >>>>>>>> Image >>>>>>>>>> ...", so >>>>>>>>>>> first point uboot >> decompressor fail. >>>>>>>>>>> Why fail? Because you have >> wrong base address in image: >>>>>>>>>>> Load Address: fffffff2 >>>>>>>>>>> Entry Point: fffffff2 >>>>>>>>>>> MIPS32 machines have RAM >> mapped to 0x80000000 address, >>>>>> so adding >>>>>>>> its >>>>>>>>>>> size, you will get max >> address (if 16MB, it will be >>>>>> 0x81000000), >>>>>>>> but >>>>>>>>>>> you uboot image was >> created with 0xfffffff2. >>>>>>>>>>> Even more, unpacked kernel >> expects it will be called at >>>>>>>> 0x80001100. so >>>>>>>>>>> if you have ELF kernel >> (file with ELF header, like >>>>>> every >>>>>>>> executable) >>>>>>>>>>> that file have to be >> loaded at (0x80001100 - >>>>>> ELF_HEADER_SIZE). >>>>>>>>>>> In most cases it will be >> 0x80001100 - 0x100 = >>>>>> 0x80001000. But >>>>>>>> sometime >>>>>>>>>>> (I did not found why) it >> can be 0x20, you can find it >>>>>> by looking >>>>>>>> at >>>>>>>>>>> .text section in readelf >> -S. >>>>>>>>>>> So if you have kernel with >> entry point 0x80001100 and >>>>>> .text >>>>>>>> segment >>>>>>>>>>> offset 0x100, you have to >> create uboot image with load >>>>>> address >>>>>>>>>>> 0x80001000 and entry point >> 0x80001100. >>>>>>>>>>> If that step successful >> you will get: >>>>>>>>>>> /Uncompressing Kernel >> Image/ ... OK >>>>>>>>>>> Starting kernel ... >>>>>>>>>>> >>>>>>>>>>> Last line mean, uboot did >> jump into kernel code. >>>>>>>>>>> Good luck. >>>>>>>>>>> >>>>>>>>>>> 2017-05-07 18:20 GMT+03:00 >> Mike Wolman >>>>>> <mike@wolman.co.uk >>>>>>>>>>> > <mailto:mike@wolman.co.uk>>: >>>>>>>>>>> >>>>>>>>>>> Hi, >>>>>>>>>>> >>>>>>>>>>> I am trying to get >> FreeBSD working on this board - >>>>>> I think I >>>>>>>> am >>>>>>>>>>> almost there in >> getting it working but need some >>>>>> help please. >>>>>>>>>>> I have followed >> instructions from the >>>>>> freebsd-wifi-build and >>>>>>>>>>> *think* I have got >> everything correct - I am trying >>>>>> to do >>>>>>>> this on >>>>>>>>>>> a CURRENT setup: >>>>>>>>>>> >>>>>>>>>>> FreeBSD >> f64-current.mw.office 12.0-CURRENT FreeBSD >>>>>>>> 12.0-CURRENT #0 >>>>>>>>>>> r317887: Sun May 7 >> 03:20:34 UTC 2017 >>>>>>>>>>> >>>>>>>> mike@f64-current.mw.office:/ > usr/obj/usr/src/sys/GENERIC- NODEBUG amd64 >>>>>>>>>>> $ cat >> ~/.freebsd-wifi-build- settings.cfg >>>>>>>>>>> X_SKIP_MORE_STUFF=YES >>>>>>>>>>> >> X_EXTRA_SRC_CONF=~/omega2/src. conf >>>>>>>>>>> $ cat >> ~/omega2/src.conf >>>>>>>>>>> WITHOUT_CLANG=YES >>>>>>>>>>> WITHOUT_CLANG_FULL=YES >>>>>>>>>>> >>>>>>>>>>> get dts files from >> thread >>>>>>>>>>> >>>>>> http://community.onion.io/ topic/1099/openwrt-on-the- > omega-2/8 >>>>>>>>>>> >>>>>>>> <http://community.onion.io/ > topic/1099/openwrt-on-the- omega-2/8> >>>>>>>>>>> cd >> ~/omega2/src/sys/gnu/dts/mips >>>>>>>>>>> fetch >>>>>>>>>>> >>>>>> https://raw.githubusercontent. com/WereCatf/source/image/ > target/linux/ramips/dts/ OMEGA2.dtsi >>>>>>>>>>> >>>>>> <https://raw. githubusercontent.com/ > WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dtsi> >>>>>>>>>>> fetch >>>>>>>>>>> >>>>>> https://raw.githubusercontent. com/WereCatf/source/image/ > target/linux/ramips/dts/ OMEGA2.dts >>>>>>>>>>> >>>>>> <https://raw. githubusercontent.com/ > WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dts> >>>>>>>>>>> fetch >>>>>>>>>>> >>>>>> https://raw.githubusercontent. com/WereCatf/source/image/ > target/linux/ramips/dts/ OMEGA2P.dts >>>>>>>>>>> >>>>>> <https://raw. githubusercontent.com/ > WereCatf/source/image/target/ linux/ramips/dts/OMEGA2P.dts> >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> buildworld >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> buildkernel >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> installworld >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> installkernel >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> distribution >>>>>>>>>>> >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> mfsroot >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink >>>>>> fsimage >>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts >> KERNCONF=MT7628_FDT >>>>>>>>>>> >> ../freebsd-wifi-build/build/ bin/build ralink uboot >>>>>>>>>>> >>>>>>>>>>> Create flash: >>>>>>>>>>> >>>>>>>>>>> >> X_FLASH=kernel.MT7628_FDT. lzma.flash >>>>>>>>>>> dd if=/dev/zero bs=$(( >> 0x200000 )) count=1 >>>>>> of=${X_FLASH} >>>>>>>>>>> dd >> if=kernel.MT7628_FDT.lzma. uImage of=${X_FLASH} >>>>>>>> conv=notrunc >>>>>>>>>>> dd if= >> mfsroot-ralink.img.lzma >> ${X_FLASH} >>>>>>>>>>> >>>>>>>>>>> $ readelf -h >> kernel.MT7628_FDT | grep Entry >>>>>>>>>>> Entry point >> address: 0x80001100 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Now on the omega over >> serial - I didnt get the >>>>>> network >>>>>>>> expansion >>>>>>>>>>> doc thing so am doing >> stuff with usb rather than >>>>>> tftp >>>>>>>>>>> I am not 100% sure >> about the 0x80001100 and the >>>>>> fatload and >>>>>>>> have >>>>>>>>>>> tried this >>>>>>>>>>> >>>>>>>>>>> Omega2 # fatload usb >> 0:1 0x80001100 >>>>>>>> /kernel.MT7628_FDT.lzma.flash >>>>>>>>>>> * >>>>>>>>>>> * >>>>>>>>>>> Reading file >>>>>> "/kernel.MT7628_FDT.lzma. flash" >>>>>>>>>>> * >>>>>>>>>>> ** >>>>>>>>>>> ** >>>>>>>>>>> ** >>>>>>>>>>> ****** >>>>>>>>>>> >>>>>> ****************************** > ****************************** ****************************** > ****************************** ********************* >>>>>>>>>>> ****** >>>>>>>>>>> * >>>>>>>>>>> FAT: 2108463 Bytes >> read >>>>>>>>>>> Omega2 # bootm >> 0x80001100 >>>>>>>>>>> ## Booting image at >> 80001100 ... >>>>>>>>>>> Image Name: >> FreeBSD >>>>>>>>>>> Image Type: MIPS >> Linux Kernel Image (lzma >>>>>> compressed) >>>>>>>>>>> Data Size: >> 1365122 Bytes = 1.3 MB >>>>>>>>>>> Load Address: >> fffffff2 >>>>>>>>>>> Entry Point: >> fffffff2 >>>>>>>>>>> Verifying Checksum >> ... OK >>>>>>>>>>> Uncompressing >> Kernel Image ... >>>>>>>>>>> >>>>>>>>>>> At this point nothing >> happens and console hangs - >>>>>> note in >>>>>>>>>>> OMEGA2.dtsithe console >> is set to ttyS0: >>>>>>>>>>> bootargs = >> "console=ttyS0,115200"; >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I have also tried with >> just kernel.MT7628_FDT and >>>>>>>>>>> kernel.MT7628_FDT.lzma >> but both fail: >>>>>>>>>>> Omega2 # fatload usb >> 0:1 0x80001100 >>>>>>>> /kernel.MT7628_FDT.lzma.uImage >>>>>>>>>>> * >>>>>>>>>>> * >>>>>>>>>>> Reading file >>>>>> "/kernel.MT7628_FDT.lzma. uImage" >>>>>>>>>>> * >>>>>>>>>>> ** >>>>>>>>>>> ** >>>>>>>>>>> ****** >>>>>>>>>>> >>>>>> ****************************** > ****************************** ****************************** > ****************************** ****** >>>>>>>>>>> ********** >>>>>>>>>>> * >>>>>>>>>>> FAT: 1365186 Bytes >> read >>>>>>>>>>> Omega2 # bootm >> 0x80001100 >>>>>>>>>>> ## Booting image at >> 80001100 ... >>>>>>>>>>> Image Name: >> FreeBSD >>>>>>>>>>> Image Type: MIPS >> Linux Kernel Image (lzma >>>>>> compressed) >>>>>>>>>>> Data Size: >> 1365122 Bytes = 1.3 MB >>>>>>>>>>> Load Address: >> fffffff2 >>>>>>>>>>> Entry Point: >> fffffff2 >>>>>>>>>>> Verifying Checksum >> ... OK >>>>>>>>>>> Uncompressing >> Kernel Image ... >>>>>>>>>>> >>>>>>>>>>> A few comments on the >> hardware for anyone who wants >>>>>> to get >>>>>>>> one: >>>>>>>>>>> Get the expansion dock >> with serial port access - >>>>>> the power >>>>>>>> dock >>>>>>>>>>> does not provide >> serial access - i think it is >>>>>> possible to >>>>>>>> use an >>>>>>>>>>> ftdi ttl serial >> chip/cable but have not tried. >>>>>>>>>>> Stupidly I forgot this >> only has wifi access so you >>>>>> are not >>>>>>>> able to >>>>>>>>>>> tftp boot this without >> getting the ethernet network >>>>>> expansion >>>>>>>> but >>>>>>>>>>> loading stuff up from >> a usb memory stick is seem >>>>>> fine from >>>>>>>> u-boot. >>>>>>>>>>> I do not think that it >> is possible to boot from the >>>>>> SD card >>>>>>>> on the >>>>>>>>>>> Omega2+ - which is a >> shame. >>>>>>>>>>> Thanks for reading, >>>>>>>>>>> >>>>>>>>>>> Mike. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >> ______________________________ _________________ >>>>>>>>>>> freebsd-mips@freebsd.org >>>>>>>> <mailto:freebsd-mips@freebsd. org>mailing >>>>>>>>>> list >>>>>>>>>>> >>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips >>>>>>>>>>> >>>>>>>> <https://lists.freebsd.org/ > mailman/listinfo/freebsd-mips> >>>>>>>>>>> To unsubscribe, send >> any mail to >>>>>>>>>>> > "freebsd-mips-unsubscribe@ freebsd.org >>>>>>>>>>> >>>>>> <mailto:freebsd-mips- unsubscribe@freebsd.org>" >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> WBW >>>>>>>>>>> ------- >>>>>>>>>>> Rybalko Aleksandr > <ray@ddteam.net >>>>>>>> <mailto:ray@ddteam.net>> >>>>>>>>>> ______________________________ > _________________ >>>>>>>>>> freebsd-mips@freebsd.org mailing list >>>>>>>>>> https://lists.freebsd.org/ > mailman/listinfo/freebsd-mips >>>>>>>>>> To unsubscribe, send any mail to >>>>>>>>>> "freebsd-mips-unsubscribe@ > freebsd.org" >>>>>>>>>> >>>>> ______________________________ _________________ >>>>> freebsd-mips@freebsd.org mailing list >>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips >>>>> To unsubscribe, send any mail to > "freebsd-mips-unsubscribe@ freebsd.org" >>>>> >>>> >>>> -- >>>> >>>> WBW >>>> ------- >>>> Rybalko Aleksandr <ray@ddteam.net> >>>> >>>> >>> >>> >home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5866.49154.qm>