Date: Sun, 08 Jan 2017 04:08:37 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-ppc@FreeBSD.org Subject: [Bug 211488] powerpc iso broken / does not burn correctly Message-ID: <bug-211488-21-0AszzGqHq0@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-211488-21@https.bugs.freebsd.org/bugzilla/>
index | next in thread | previous in thread | raw e-mail
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211488 --- Comment #9 from Sevan Janiyan <venture37@geeklan.co.uk> --- Issue is definitely with Disk Utility.app on OS X Just managed to burn the FreeBSD-12.0-CURRENT-powerpc-20161221-r310361-disc1.iso using cdrecord without issue. cdrecord speed=8 dev=/dev/cd0c FreeBSD-12.0-CURRENT-powerpc-20161221-r310361-disc1.iso cdrecord: No write mode specified. cdrecord: Assuming -sao mode. cdrecord: If your drive does not accept -sao, try -tao. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 3.01 (powerpc-apple-netbsd7.99.56) Copyright (C) 1995-2015 Joerg Schilling scsidev: '/dev/cd0c' devname: '/dev/cd0c' scsibus: -2 target: -2 lun: -2 Using libscg version 'schily-0.9'. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'MATSHITA' Identifikation : 'CD-RW CW-8123 ' Revision : 'CAD4' Device seems to be: Generic mmc2 DVD-ROM. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R cdrecord: Warning: Cannot read drive buffer. cdrecord: Warning: The DMA speed test has been skipped. Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Turning BURN-Free off cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Track 01: Total bytes read/written: 520865792/520865792 (254329 sectors). Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #0 r310361: Wed Dec 21 15:49:56 UTC 2016 root@releng3.nyi.freebsd.org:/usr/obj/powerpc.powerpc/usr/src/sys/GENERIC powerpc gcc version 4.2.1 20070831 patched [FreeBSD] WARNING: WITNESS option enabled, expect reduced performance. VT(ofwfb): resolution 1440x900 cpu0: IBM PowerPC 970FX revision 3.0, 900.40 MHz cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> cpu0: HID0 511081<NAP,DPM,NHR,TBEN,ENATTN> real memory = 2126036992 (2027 MB) avail memory = 2019106816 (1925 MB) random: unblocking device. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pcr0: <PPC 970 Power Control Register> on cpu0 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 222, bank1 generation 221 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0 unin0: Version 57 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: <OFW I2C bus> on iichb0 iicbus0: <unknown card> at addr 0x1c0 htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff irq 224 on unin0 pcib0: <Apple U3 Host-AGP bridge> mem 0xf0000000-0xf1ffffff on ofwbus0 pci0: <OFW PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0xa0000000-0xa7ffffff irq 187 at device 16.0 on pci0 backlight0: <PowerBook backlight for nVidia graphics> on vgapci0 vgapci0: Boot video device agp0: <Apple U3 AGP Bridge> on hostb0 pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 pcib1: 86 HT IRQs on device 1.0 pci1: <OFW PCI bus> on pcib1 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 gem0: <Apple Shasta GMAC Ethernet> mem 0x80400000-0x805fffff irq 168 at device 15.0 on pci2 miibus0: <MII bus> on gem0 bmtphy0: <BCM5221 10/100 media interface> PHY 0 on miibus0 bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow gem0: 10kB RX FIFO, 4kB TX FIFO gem0: Ethernet address: 00:0d:93: pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 pci3: <OFW PCI bus> on pcib3 macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci3 openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0 macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 151,145,146,152,147,148 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 155 on macio0 iicbus1: <OFW I2C bus> on iichb1 iicbus1: <unknown card> at addr 0x1c0 snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 156,139,140,157,141,142 on macio0 pci3: <network> at device 1.0 (no driver attached) ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 198 at device 11.0 on pci3 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 198 at device 11.1 on pci3 usbus1 on ohci1 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 198 at device 11.2 on pci3 usbus2: EHCI version 1.0 usbus2 on ehci0 pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 pci4: <OFW PCI bus> on pcib4 atapci0: <ServerWorks K2 SATA150 controller> mem 0x80102000-0x80103fff irq 138 at device 12.0 on pci4 pcib1: failed to reserve resource for pcib4 atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 ata0: <Shasta Kauai ATA Controller> mem 0x80104000-0x80107fff irq 166,165 at device 13.0 on pci4 fwohci0: <1394 Open Host Controller Interface> mem 0x80100000-0x80100fff irq 167 at device 14.0 on pci4 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:0d:93:ff:fe: fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0d:93: fwe0: Ethernet address: 02:0d:93: sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound = 0x00000000 fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode smu0: <Apple System Management Unit> on ofwbus0 iichb2: <SMU I2C controller> on smu0 iicbus2: <OFW I2C bus> on iichb2 ds17750: <Temp-Monitor DS1775> at addr 0x92 on iicbus2 iicbus2: <unknown card> at addr 0xd4 iichb3: <SMU I2C controller> on smu0 iicbus3: <OFW I2C bus> on iichb3 cryptosoft0: <software crypto> on nexus0 NULL mp in getnewvnode() Timecounter "timebase" frequency 33333333 Hz quality 0 Event timer "decrementer" frequency 33333333 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <NEC OHCI root HUB> at usbus0 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <NEC EHCI root HUB> at usbus2 uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub0: 2 ports with 2 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub2: 5 ports with 5 removable, self powered ugen2.2: <Apple, Inc. Keyboard Hub> at usbus2 uhub3 on uhub2 uhub3: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/95.15, addr 2> on usbus2 cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <MATSHITA DVD-R UJ-825 DBN7> Removable CD-ROM SCSI device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <Hitachi HDT725032VLA360 V54OA73A> ATA-7 SATA 2.x device ada0: Serial Number VFD200XXXXXXXX ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 305244MB (625140335 512 byte sectors)uhub3: 3 ports with 2 removable, bus powered taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0 taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ada0s4 [rw]... -- You are receiving this mail because: You are the assignee for the bug.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-211488-21-0AszzGqHq0>