Date: Thu, 15 Jul 1999 05:03:42 -0700 (PDT) From: mako@tcn-catv.ne.jp To: freebsd-gnats-submit@freebsd.org Subject: conf/12650: No card in /etc/pccard.conf.sample (corega EtherII PCC-T) Message-ID: <19990715120342.1EB3514C36@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 12650
>Category: conf
>Synopsis: No card in /etc/pccard.conf.sample (corega EtherII PCC-T)
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Thu Jul 15 05:10:01 PDT 1999
>Closed-Date:
>Last-Modified:
>Originator: KANAZAWA makoto
>Release: FreeBSD 4.0-CURRENT
>Organization:
>Environment:
FreeBSD 4.0-CURRENT FreeBSD 4.0-CURRENT #5: Tue Jul 6 17:17:44 JST 1999 i386
>Description:
corega EtherII PCC-T is pc-card, NE2000 compatible ethernet card,
and easy to get in japan.
This card is not recognized at boot.
Here is 'pccardc dumpcis' results:
---------------------------------------
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: dc 00 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 100nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 49 00 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = ON
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 0f c0 00 00
PCMCIA ID = 0xc00f, OEM ID = 0x0
Tuple #4, code = 0x15 (Version 1 info), length = 36
000: 04 01 63 6f 72 65 67 61 20 4b 2e 4b 2e 00 63 6f
010: 72 65 67 61 20 45 74 68 65 72 49 49 20 50 43 43
020: 2d 54 00 ff
Version = 4.1, Manuf = [corega K.K.],card vers = [corega EtherII PCC-T]
Tuple #5, code = 0x13 (Link target), length = 3
000: 43 49 53
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 26 f8 03 03
Reg len = 2, config register addr = 0x3f8, last config = 0x26
Registers: XX------
Tuple #8, code = 0x1b (Configuration entry), length = 17
000: e0 81 1d 3f 55 4d 5d 06 86 46 26 fc 24 65 30 ff
010: ff
Config index = 0x20(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 1 x 100mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Wait scale Speed = 1.5 x 10 us
Card decodes 4 address lines, 8 Bit I/O only
IRQ modes: Level
IRQ level = 4
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 20 08 e5 60 00 03 1f
Config index = 0x20
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x20
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 21 08 e5 60 20 03 1f
Config index = 0x21
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length = 0x20
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 22 08 e5 60 40 03 1f
Config index = 0x22
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #12, code = 0x1b (Configuration entry), length = 7
000: 23 08 e5 60 60 03 1f
Config index = 0x23
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x360 block length = 0x20
Tuple #13, code = 0x1b (Configuration entry), length = 7
000: 24 08 e5 60 80 03 1f
Config index = 0x24
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x380 block length = 0x20
Tuple #14, code = 0x1b (Configuration entry), length = 7
000: 25 08 e5 60 a0 03 1f
Config index = 0x25
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3a0 block length = 0x20
Tuple #15, code = 0x1b (Configuration entry), length = 7
000: 26 08 e5 60 c0 03 1f
Config index = 0x26
Card decodes 5 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3c0 block length = 0x20
Tuple #16, code = 0x14 (No link), length = 0
Tuple #17, code = 0xff (Terminator), length = 0
>How-To-Repeat:
If you have this card, insert.
>Fix:
I put the following at my /etc/pccard.conf,
and I'm using this card.
--------------------------
# COREGA EtherII PCC-T
card "corega K.K." "corega EtherII PCC-T"
config 0x20 "ed0" ?
insert echo EtherII PCC-T inserted
insert /etc/pccard_ether ed0
remove echo EtherII PCC-T removed
remove /sbin/ifconfig ed0 delete
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990715120342.1EB3514C36>