Date: Mon, 4 May 2020 11:00:24 +0000 (UTC) From: Vladimir Kondratyev <wulf@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r360625 - head/sys/dev/evdev Message-ID: <202005041100.044B0OKj096235@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: wulf Date: Mon May 4 11:00:24 2020 New Revision: 360625 URL: https://svnweb.freebsd.org/changeset/base/360625 Log: [evdev] Sync event codes with Linux kernel 5.6 MFC after: 2 weeks Modified: head/sys/dev/evdev/input-event-codes.h head/sys/dev/evdev/input.h Modified: head/sys/dev/evdev/input-event-codes.h ============================================================================== --- head/sys/dev/evdev/input-event-codes.h Mon May 4 10:59:17 2020 (r360624) +++ head/sys/dev/evdev/input-event-codes.h Mon May 4 11:00:24 2020 (r360625) @@ -453,10 +453,12 @@ #define KEY_TITLE 0x171 #define KEY_SUBTITLE 0x172 #define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 +#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */ +#define KEY_ZOOM KEY_FULL_SCREEN #define KEY_MODE 0x175 #define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 +#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */ +#define KEY_SCREEN KEY_ASPECT_RATIO #define KEY_PC 0x178 /* Media Select Computer */ #define KEY_TV 0x179 /* Media Select TV */ #define KEY_TV2 0x17a /* Media Select Cable */ @@ -618,6 +620,7 @@ #define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ #define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ +#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ @@ -660,7 +663,87 @@ */ #define KEY_DATA 0x277 #define KEY_ONSCREEN_KEYBOARD 0x278 +/* Electronic privacy screen control */ +#define KEY_PRIVACY_SCREEN_TOGGLE 0x279 +/* Select an area of screen to be copied */ +#define KEY_SELECTIVE_SCREENSHOT 0x27a + +/* + * Some keyboards have keys which do not have a defined meaning, these keys + * are intended to be programmed / bound to macros by the user. For most + * keyboards with these macro-keys the key-sequence to inject, or action to + * take, is all handled by software on the host side. So from the kernel's + * point of view these are just normal keys. + * + * The KEY_MACRO# codes below are intended for such keys, which may be labeled + * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys + * where the marking on the key does indicate a defined meaning / purpose. + * + * The KEY_MACRO# codes MUST also NOT be used as fallback for when no existing + * KEY_FOO define matches the marking / purpose. In this case a new KEY_FOO + * define MUST be added. + */ +#define KEY_MACRO1 0x290 +#define KEY_MACRO2 0x291 +#define KEY_MACRO3 0x292 +#define KEY_MACRO4 0x293 +#define KEY_MACRO5 0x294 +#define KEY_MACRO6 0x295 +#define KEY_MACRO7 0x296 +#define KEY_MACRO8 0x297 +#define KEY_MACRO9 0x298 +#define KEY_MACRO10 0x299 +#define KEY_MACRO11 0x29a +#define KEY_MACRO12 0x29b +#define KEY_MACRO13 0x29c +#define KEY_MACRO14 0x29d +#define KEY_MACRO15 0x29e +#define KEY_MACRO16 0x29f +#define KEY_MACRO17 0x2a0 +#define KEY_MACRO18 0x2a1 +#define KEY_MACRO19 0x2a2 +#define KEY_MACRO20 0x2a3 +#define KEY_MACRO21 0x2a4 +#define KEY_MACRO22 0x2a5 +#define KEY_MACRO23 0x2a6 +#define KEY_MACRO24 0x2a7 +#define KEY_MACRO25 0x2a8 +#define KEY_MACRO26 0x2a9 +#define KEY_MACRO27 0x2aa +#define KEY_MACRO28 0x2ab +#define KEY_MACRO29 0x2ac +#define KEY_MACRO30 0x2ad + +/* + * Some keyboards with the macro-keys described above have some extra keys + * for controlling the host-side software responsible for the macro handling: + * -A macro recording start/stop key. Note that not all keyboards which emit + * KEY_MACRO_RECORD_START will also emit KEY_MACRO_RECORD_STOP if + * KEY_MACRO_RECORD_STOP is not advertised, then KEY_MACRO_RECORD_START + * should be interpreted as a recording start/stop toggle; + * -Keys for switching between different macro (pre)sets, either a key for + * cycling through the configured presets or keys to directly select a preset. + */ +#define KEY_MACRO_RECORD_START 0x2b0 +#define KEY_MACRO_RECORD_STOP 0x2b1 +#define KEY_MACRO_PRESET_CYCLE 0x2b2 +#define KEY_MACRO_PRESET1 0x2b3 +#define KEY_MACRO_PRESET2 0x2b4 +#define KEY_MACRO_PRESET3 0x2b5 + +/* + * Some keyboards have a buildin LCD panel where the contents are controlled + * by the host. Often these have a number of keys directly below the LCD + * intended for controlling a menu shown on the LCD. These keys often don't + * have any labeling so we just name them KEY_KBD_LCD_MENU# + */ +#define KEY_KBD_LCD_MENU1 0x2b8 +#define KEY_KBD_LCD_MENU2 0x2b9 +#define KEY_KBD_LCD_MENU3 0x2ba +#define KEY_KBD_LCD_MENU4 0x2bb +#define KEY_KBD_LCD_MENU5 0x2bc + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 @@ -722,6 +805,16 @@ #define REL_DIAL 0x07 #define REL_WHEEL 0x08 #define REL_MISC 0x09 +/* + * 0x0a is reserved and should not be used in input drivers. + * It was used by HID as REL_MISC+1 and userspace needs to detect if + * the next REL_* event is correct or is just REL_MISC + n. + * We define here REL_RESERVED so userspace can rely on it and detect + * the situation described above. + */ +#define REL_RESERVED 0x0a +#define REL_WHEEL_HI_RES 0x0b +#define REL_HWHEEL_HI_RES 0x0c #define REL_MAX 0x0f #define REL_CNT (REL_MAX+1) @@ -757,6 +850,15 @@ #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 + +/* + * 0x2e is reserved and should not be used in input drivers. + * It was used by HID as ABS_MISC+6 and userspace needs to detect if + * the next ABS_* event is correct or is just ABS_MISC + n. + * We define here ABS_RESERVED so userspace can rely on it and detect + * the situation described above. + */ +#define ABS_RESERVED 0x2e #define ABS_MT_SLOT 0x2f /* MT slot being modified */ #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ Modified: head/sys/dev/evdev/input.h ============================================================================== --- head/sys/dev/evdev/input.h Mon May 4 10:59:17 2020 (r360624) +++ head/sys/dev/evdev/input.h Mon May 4 11:00:24 2020 (r360625) @@ -148,10 +148,11 @@ struct input_keymap_entry { /* * MT_TOOL types */ -#define MT_TOOL_FINGER 0 -#define MT_TOOL_PEN 1 -#define MT_TOOL_PALM 2 -#define MT_TOOL_MAX 2 +#define MT_TOOL_FINGER 0x00 +#define MT_TOOL_PEN 0x01 +#define MT_TOOL_PALM 0x02 +#define MT_TOOL_DIAL 0x0a +#define MT_TOOL_MAX 0x0f /* * Values describing the status of a force-feedback effect
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202005041100.044B0OKj096235>