Date: Mon, 07 May 2007 22:07:26 +0400 From: Alex Keda <admin@lissyara.su> To: freebsd-multimedia@freebsd.org Subject: Failed load nvidia-driver-1.0.9746 on FreeBSD current Message-ID: <463F6ADE.1080803@lissyara.su>
next in thread | raw e-mail | index | archive | help
ussr# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Mon May 7 20:56:42 MSD 2007
root@ussr.lissyara.int.otradno.ru:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
link_elf: symbol msleep undefined
KLD file nvidia.ko - could not finalize loading
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2004.19-MHz
686-class CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
real memory = 1039073280 (990 MB)
avail memory = 994709504 (948 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ddf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem
0xfc000000-0xfcffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16
at device 5.0 on pci0
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21
at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq
22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfdbff000-0xfdbff7ff,0xfdbf8000-0xfdbfbfff irq 19 at device 5.0 on pci4
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:ee:cc:8c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:ee:cc:8c
fwe0: Ethernet address: 02:11:d8:ee:cc:8c
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcm0: <NVidia MCP51 High Definition Audio Controller> mem
0xfe024000-0xfe027fff irq 21 at device 16.1 on pci0
pcm0: [ITHREAD]
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xc800-0xc807 mem
0xfe02b000-0xfe02bfff irq 22 at device 20.0 on pci0
nve0: Ethernet address 00:18:f3:97:3e:1b
miibus0: <MII bus> on nve0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
nve0: using obsoleted if_watchdog interface
nve0: Ethernet address: 00:18:f3:97:3e:1b
nve0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <V Micro. Corp. PC Camera, class 0/0, rev 1.10/1.00, addr 2> on uhub0
ums0: <A4Tech RF USB Mouse, class 0/0, rev 1.10/0.01, addr 3> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 76318MB <WDC WD800JB-00FMA0 13.03G13> at ata0-master UDMA100
acd0: DVDR <NEC DVD RW ND-4550A/1.06> at ata1-master UDMA33
pcm0: hdac_widget_connection_parse: nid=18 WARNING: zero cnid entnum=4
j=2 index=0 entries=8 found=2 res=0x21002211
pcm0: <HDA Codec: Analog Devices AD1986A>
pcm0: <HDA Driver Revision: 20070505_0044>
SMP: AP CPU #1 Launched!
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-4550A 1.06> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
if I manual loading driver, I have:
ussr# kldload nvidia
kldload: can't load nvidia: No such file or directory
ussr# tail -1 /var/log/messages
May 7 22:06:13 ussr kernel: link_elf: symbol msleep undefined
ussr#
ussr# kldstat
Id Refs Address Size Name
1 46 0xc0400000 7ddbf8 kernel
2 1 0xc0bde000 3714 snd_driver.ko
3 2 0xc0be2000 4e78 snd_ad1816.ko
4 35 0xc0be7000 3e490 sound.ko
5 2 0xc0c26000 5324 snd_als4000.ko
6 2 0xc0c2c000 6c14 snd_atiixp.ko
7 2 0xc0c33000 477c snd_cmi.ko
8 2 0xc0c38000 5604 snd_cs4281.ko
9 3 0xc0c3e000 74f4 snd_csa.ko
10 2 0xc0c46000 c148 snd_ds1.ko
11 2 0xc0c53000 ed9c snd_emu10kx.ko
12 2 0xc0c62000 82cc snd_envy24.ko
13 4 0xc0c6b000 1868 snd_spicds.ko
14 2 0xc0c6d000 716c snd_envy24ht.ko
15 2 0xc0c75000 79a8 snd_es137x.ko
16 2 0xc0c7d000 4b28 snd_ess.ko
17 5 0xc0c82000 498c snd_sbc.ko
18 2 0xc0c87000 4a74 snd_fm801.ko
19 3 0xc0c8c000 b3e8 snd_mss.ko
20 2 0xc0c98000 13424 snd_hda.ko
21 2 0xc0cac000 6900 snd_ich.ko
22 2 0xc0cb3000 8874 snd_maestro.ko
23 2 0xc0cbc000 a464 snd_maestro3.ko
24 2 0xc0cc7000 10938 snd_neomagic.ko
25 2 0xc0cd8000 4fe8 snd_sb16.ko
26 2 0xc0cdd000 4a1c snd_sb8.ko
27 2 0xc0ce2000 5b3c snd_solo.ko
28 2 0xc0ce8000 45fc snd_t4dwave.ko
29 2 0xc0ced000 755c snd_via8233.ko
30 2 0xc0cf5000 4bac snd_via82c686.ko
31 2 0xc0cfa000 55f4 snd_vibes.ko
32 1 0xc0d00000 ab20 cpufreq.ko
34 5 0xc13df000 38fc libiconv.ko
35 1 0xc13e3000 1e84 msdosfs_iconv.ko
36 1 0xc13e5000 1e6c cd9660_iconv.ko
37 1 0xc13e7000 1e3c ntfs_iconv.ko
38 2 0xc13e9000 b700 ntfs.ko
39 1 0xc13f5000 1e28 udf_iconv.ko
40 2 0xc13f7000 6a48 udf.ko
41 1 0xc13fe000 4bcc atapicam.ko
42 1 0xc1403000 5f5dc acpi.ko
ussr#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?463F6ADE.1080803>