Date: Tue, 02 Apr 2013 20:23:20 +0200 From: mh@kernel32.de To: <freebsd-current@freebsd.org> Subject: Re: panic at serial boot Message-ID: <941a3c1e7cb49087c8bf941399b1e5ae@kernel32.de> In-Reply-To: <24096f01453ab9d0fe898522874cd928@kernel32.de> References: <e755813a47d9e5a05dd2d308a6b3d8a9@kernel32.de> <515289AC.3050204@FreeBSD.org> <936608f069b988fcd58707edb9b4dde0@kernel32.de> <20130327133220.GZ3794@kib.kiev.ua> <24096f01453ab9d0fe898522874cd928@kernel32.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Konstantin, Am 2013-03-27 15:33, schrieb mh@kernel32.de: > Am 2013-03-27 14:32, schrieb Konstantin Belousov: >> >> Do you use preload md(4) ? If yes, try the following patch: >> > > > Not sure whether time permits that today, but I'm starting right > away. > Had no time before easter, but I tried it now. This time, no panic, but also it doesn't continue to boot ;) This is the last output I can see: ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 48 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 5 vector 48 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 6 vector 48 msi: Assigning MSI-X IRQ 264 to local APIC 7 vector 48 SMP: passed TSC synchronization test TSC timecounter discards lower 1 bit(s) Timecounter "TSC-low" frequency 1300027430 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus2 usbus1 usbus0 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 usbus0 ugen0.2: <vendor 0x8087> at usbus0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 Root mount waiting for: usbus2 usbus0 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen2.3: <vendor 0x0424> at usbus2 uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2 Root mount waiting for: usbus2 uhub5: 2 ports with 1 removable, self powered Trying to mount root from ufs:/dev/md0 []... start_init: trying /sbin/init And it stayed there for the last 10 minutes. What can I do now? thanks and best regards, Marian PS.: FWIW, the image I build via mfsbsd is here: http://mon.kernel32.de/mfsbsd-se-CURRENT-mdpatch.iso And the hd image used for pxe booting is this one: http://mon.kernel32.de/FreeBSD-10.0-CURRENT-amd64.hd
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?941a3c1e7cb49087c8bf941399b1e5ae>