Date: Thu, 14 Apr 2011 11:40:29 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: Matthias Apitz <guru@unixarea.de> Cc: freebsd-multimedia@freebsd.org Subject: Re: webcamd-0.1.23 does not start via rc.d Message-ID: <201104141140.29531.hselasky@c2i.net> In-Reply-To: <20110414092354.GA28455@sh4-5.1blu.de> References: <20110413140141.GA9608@sh4-5.1blu.de> <201104141047.58402.hselasky@c2i.net> <20110414092354.GA28455@sh4-5.1blu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 14 April 2011 11:23:55 Matthias Apitz wrote: > El día Thursday, April 14, 2011 a las 10:47:58AM +0200, Hans Petter Selasky escribió: > > Dump the device and config descriptor of your webcam using usbconfig. > > Maybe the webcamd script is not matching it. > > see below; > > but the daemon is not starting; it is not even touched: > > vm-9Current# /usr/local/etc/rc.d/webcamd start > vm-9Current# ls -lu /usr/local/sbin/webcamd > -r-xr-xr-x 1 root wheel 2934932 13 abr 16:00 /usr/local/sbin/webcamd > vm-9Current# date > jueves, 14 de abril de 2011, 11:23:14 CEST > > which let me think that there is something wrong with the script > /usr/local/etc/rc.d/webcamd; > > vm-9Current# usbconfig > ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=SAVE ugen1.1: <EHCI root HUB 0x15ad> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE ugen0.3: <VMware Virtual USB Hub vendor 0x0e0f> at > usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen0.2: <product 0x0329 > vendor 0x0471> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > Hi, Your device should be detected by the rules in: /usr/local/etc/devd/webcamd.conf Are you using 8-stable? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201104141140.29531.hselasky>