Date: Wed, 5 Apr 2017 14:40:35 +1000 From: Jason Tubnor <jason@tubnor.net> To: "freebsd-virtualization@freebsd.org" <freebsd-virtualization@freebsd.org> Subject: OpenBSD 6.1-snapshot no longer works in bhyve Message-ID: <CACLnyCKVbQKW1MddOfDqJnojEskrtA-gVDAX=sn%2BLgSJxB5TSA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I thought I would raise the above on the misc@openbsd.org mail list as I was concluding my testing for the upcoming 6.1 release. Here is my initial email: http://marc.info/?l=openbsd-misc&m=149136052120277&w=2 Based on the responses: http://marc.info/?l=openbsd-misc&m=149136160420488&w=2 and http://marc.info/?l=openbsd-misc&m=149136173520510&w=2 it appears that bhyve is publishing a CPU feature that actually isn't there. FYI, 6.1-release and 6.1-snapshots will not boot at this stage. I have my new production kit arriving so I can test on different hardware to determine if this is a CPU rev. issue but thought I'd put it here to get the thought processes working on it. I am running 11.0-release p8 Thanks, Jason. dmesg ----------------- Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22 06:12:04 UTC 2017 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) VT(efifb): resolution 1440x900 CPU: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (3491.99-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8160088064 (7782 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM SLIC-WKS> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff8101d970, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-WKS> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> numa-domain 0 on acpi0 cpu1: <ACPI CPU> numa-domain 0 on acpi0 cpu2: <ACPI CPU> numa-domain 0 on acpi0 cpu3: <ACPI CPU> numa-domain 0 on acpi0 cpu4: <ACPI CPU> numa-domain 0 on acpi0 cpu5: <ACPI CPU> numa-domain 0 on acpi0 cpu6: <ACPI CPU> numa-domain 0 on acpi0 cpu7: <ACPI CPU> numa-domain 0 on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 acpi_button0: <Power Button> on acpi0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib1: _OSC returned error 0x10 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 47 at device 1.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 2.0 on pci3 pci4: <PCI bus> on pcib4 bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf6000000-0xf7ffffff at device 0.0 on pci4 miibus0: <MII bus> on bce0 brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: 00:10:18:bf:c4:e8 bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf8000000-0xf9ffffff at device 0.1 on pci4 miibus1: <MII bus> on bce1 brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: 00:10:18:bf:c4:ea bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib5: <PCI-PCI bridge> at device 4.0 on pci3 pci5: <PCI bus> on pcib5 bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf2000000-0xf3ffffff at device 0.0 on pci5 miibus2: <MII bus> on bce2 brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce2: Using defaults for TSO: 65518/35/2048 bce2: Ethernet address: 00:10:18:bf:c4:ec bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) Coal (RX:6,6,18,18; TX:20,20,80,80) bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xf4000000-0xf5ffffff at device 0.1 on pci5 miibus3: <MII bus> on bce3 brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce3: Using defaults for TSO: 65518/35/2048 bce3: Ethernet address: 00:10:18:bf:c4:ee bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib6: <ACPI PCI-PCI bridge> irq 47 at device 2.0 on pci1 pci6: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at device 0.0 on pci6 vgapci0: Boot video device hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfb000000-0xfb003fff irq 36 at device 0.1 on pci6 pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.0 on pci1 pci7: <ACPI PCI bus> on pcib7 pci1: <unknown> at device 17.0 (no driver attached) ahci0: <Intel Wellsburg (RAID) AHCI SATA controller> port 0x20a0-0x20a7,0x20b4-0x20b7,0x2098-0x209f,0x20b0-0x20b3,0x2040-0x205f mem 0xfb13c000-0xfb13c7ff irq 16 at device 17.4 on pci1 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb120000-0xfb12ffff irq 19 at device 20.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 pci1: <simple comms> at device 22.0 (no driver attached) pci1: <simple comms, UART> at device 22.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x2020-0x203f mem 0xfb100000-0xfb11ffff,0xfb13a000-0xfb13afff irq 20 at device 25.0 on pci1 em0: Using an MSI interrupt em0: Ethernet address: 64:51:06:4a:4b:df em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb139000-0xfb1393ff irq 18 at device 26.0 on pci1 usbus1: EHCI version 1.0 usbus1 on ehci0 hdac1: <Intel Wellsburg HDA Controller> mem 0xfb130000-0xfb133fff irq 22 at device 27.0 on pci1 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci1 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 28.3 on pci1 pci10: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci10 pci11: <ACPI PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1 pci12: <ACPI PCI bus> on pcib12 ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb138000-0xfb1383ff irq 18 at device 29.0 on pci1 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci1 isa0: <ISA bus> on isab0 atapci0: <Intel Wellsburg SATA600 controller> port 0x2088-0x208f,0x20ac-0x20af,0x2080-0x2087,0x20a8-0x20ab,0x2070-0x207f,0x2060-0x206f irq 16 at device 31.2 on pci1 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROM> at iomem 0xd7800-0xd87ff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1 est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2 est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3 est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4 est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5 est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6 est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7 usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec nvme cam probe device init hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC221 (Analog)> at nid 23 and 24,26,27 on hdaa1 pcm3: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered ugen0.2: <CHICONY> at usbus0 ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 1> on usbus0 kbd2 at ukbd0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD10EZEX-60M2NA0 03.01A03> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WCC3F5VFLZY6 ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST1000DM003-1ER162 CC46> ACS-2 ATA SATA 3.x device ada1: Serial Number Z4Y86N2K ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) uhub3: 6 ports with 6 removable, self powered ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <INTEL SSDSC2CW060A3 400i> ACS-2 ATA SATA 3.x device ada2: Serial Number CVCV2080008A060AGN ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 57241MB (117231408 512 byte sectors) SMP: AP CPU #1 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #7 Launched! Timecounter "TSC-low" frequency 1745995300 Hz quality 1000 Trying to mount root from zfs:zroot/ROOT/default []... uhub4: 8 ports with 8 removable, self powered ugen0.3: <vendor 0x0451> at usbus0 uhub5: <vendor 0x0451 product 0x8142, class 9/0, rev 2.10/1.00, addr 2> on usbus0 uhub5: MTT enabled GEOM_MIRROR: Device mirror/swap launched (2/2). Root mount waiting for: usbus0 uhub5: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.4: <vendor 0x0451> at usbus0 uhub6: <vendor 0x0451 product 0x8140, class 9/0, rev 3.00/1.00, addr 3> on usbus0 uhub6: 4 ports with 4 removable, self powered bce0: link state changed to DOWN bce3: link state changed to DOWN bce0: Gigabit link up! bce0: link state changed to UP bce0: Gigabit link up! bce0: Gigabit link up! tap50: Ethernet address: 00:bd:72:a2:f7:32 bridge0: Ethernet address: 02:a3:84:b8:89:00 bce0: promiscuous mode enabled bridge0: link state changed to UP tap50: promiscuous mode enabled tap20: Ethernet address: 00:bd:ca:a2:f7:14 bridge2: Ethernet address: 02:a3:84:b8:89:02 bce3: promiscuous mode enabled bridge2: link state changed to DOWN tap20: promiscuous mode enabled tap50: link state changed to UP tap20: link state changed to UP bridge2: link state changed to UP bce3: Gigabit link up! bce3: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACLnyCKVbQKW1MddOfDqJnojEskrtA-gVDAX=sn%2BLgSJxB5TSA>