Date: Mon, 20 Jan 2020 08:47:59 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 243463] ix0: Watchdog timeout Message-ID: <bug-243463-227@https.bugs.freebsd.org/bugzilla/>
index | next in thread | raw e-mail
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=243463 Bug ID: 243463 Summary: ix0: Watchdog timeout Product: Base System Version: 12.1-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: silence@cnw.cz Hi all, I observe some strange behavior of my NIC. Dual port Intel X520, only one port connected. Real traffic about 400MBit RX / 100MBit TX, Supermicro X11SCL-F/Xeon E-2176G/2x8GB RAM, latest BIOS R1.2, acting as pf firewall/router. New install, running first day. ix0: Watchdog timeout (TX: 0 desc avail: 34 pidx: 1455) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 0 desc avail: 34 pidx: 1885) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 0 desc avail: 34 pidx: 1062) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 1 desc avail: 34 pidx: 177) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 0 desc avail: 33 pidx: 1275) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 0 desc avail: 34 pidx: 2014) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 0 desc avail: 34 pidx: 707) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: Watchdog timeout (TX: 0 desc avail: 34 pidx: 653) -- resetting ix0: link state changed to DOWN ix0: link state changed to UP ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8138b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER> ether a0:36:9f:26:fb:b8 inet x.x.x.x netmask 0xfffffff8 broadcast y.y.y.y media: Ethernet autoselect (10Gbase-LR <full-duplex,rxpause,txpause>) status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> plugged: SFP/SFP+/SFP28 10G Base-LR (LC) vendor: Intel Corp PN: SFP-10G13-LR SN: IB81220374 DATE: 2018-12-20 module temperature: 36.87 C Voltage: 3.28 Volts RX: 0.54 mW (-2.64 dBm) TX: 0.71 mW (-1.43 dBm) ix0@pci0:1:0:0: class=0x020000 card=0x7b118086 chip=0x154d8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'Ethernet 10G 2P X520 Adapter' class = network subclass = ethernet sysctl.conf kern.ipc.maxsockbuf=16777216 net.inet.tcp.mssdflt=1460 net.inet.tcp.minmss=536 loader.conf cc_htcp_load="YES" machdep.hyperthreading_allowed="0" net.inet.tcp.soreceive_stream="1" net.isr.maxthreads="-1" net.isr.bindthreads="-1" net.pf.source_nodes_hashsize="1048576" Jiri -- You are receiving this mail because: You are the assignee for the bug.help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-243463-227>