Date: Thu, 9 Oct 2025 20:26:31 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: brd@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #26941 - Still Failing Message-ID: <803867447.715.1760041591836@jenkins.ci.freebsd.org> In-Reply-To: <388227637.705.1760036335395@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #26941 (a7d9c69fa903ad880f9dd36505f9d824f668283e) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26941/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26941/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26941/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) a7d9c69fa903ad880f9dd36505f9d824f668283e by brd: g_part: Replace some spaces with tabs to match the rest of this struct The end of the build log: [...truncated 4.02 MiB...] epair0b: link state changed to UP epair1a: Ethernet address: 0e:8b:ec:a1:45:3f epair1b: Ethernet address: 22:b5:5d:e0:e2:06 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.267s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 6a:fb:19:d1:88:4f epair0b: Ethernet address: 82:f5:0e:8e:cc:91 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: b6:54:43:d4:d3:d9 epair1b: Ethernet address: d6:ab:7d:99:26:d5 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.237s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: c6:8b:3c:02:3e:a2 epair0b: Ethernet address: ee:f9:df:58:5a:bd epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: d2:9f:ca:04:9b:e0 epair1b: Ethernet address: fe:11:cb:cb:a5:cb epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.317s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 9e:01:75:74:45:b8 epair0b: Ethernet address: c6:e8:63:06:42:59 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: aa:47:e9:40:de:91 epair1b: Ethernet address: 26:84:b7:31:5f:a9 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.237s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 16:75:a9:e9:65:5c epair0b: Ethernet address: fa:48:6d:bb:95:50 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: c2:b9:02:30:75:64 epair1b: Ethernet address: 0e:f3:ab:44:6d:ed epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.279s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 52:28:18:12:c6:28 epair0b: Ethernet address: 86:20:7f:28:7d:d7 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4a:c1:e5:bf:fd:1c epair1b: Ethernet address: 16:0a:d8:9e:92:51 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.237s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 22:7d:cc:4d:eb:1c epair0b: Ethernet address: da:55:f1:db:bd:44 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 56:ff:65:de:49:68 epair1b: Ethernet address: 26:5c:1e:52:c9:8a epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.248s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 1e:f8:5e:62:f5:0f epair0b: Ethernet address: 1a:21:00:c9:28:3e epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 32:2c:15:2f:34:ad epair1b: Ethernet address: 52:bf:9e:f6:fa:6e epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.238s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: f6:f8:3a:73:2f:34 epair0b: Ethernet address: 82:9c:70:64:3b:73 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 22:ae:d3:5a:e8:0e epair1b: Ethernet address: 96:f3:83:4a:43:f9 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 96:59:1f:e5:30:69 epair2b: Ethernet address: da:b2:69:0c:79:84 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.336s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: ee:fb:5a:77:cd:3e epair0b: Ethernet address: f2:a8:ee:4a:98:61 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: d2:81:ca:d4:ee:f3 epair1b: Ethernet address: 1a:48:46:f2:20:a8 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 7a:97:bd:9e:31:ae epair2b: Ethernet address: ba:34:9b:29:5e:41 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.096s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 9e:24:80:55:19:e1 epair0b: Ethernet address: 3e:d8:d1:b1:43:67 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 9e:42:2c:4a:b5:d9 epair1b: Ethernet address: 8e:79:98:3e:2f:70 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: d2:ed:72:b0:77:33 epair2b: Ethernet address: 1a:bb:2a:26:2e:09 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512) cpuid = 0 time = 1760041590 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820 vpanic() at vpanic+0x136/frame 0xfffffe008baf0950 panic() at panic+0x43/frame 0xfffffe008baf09b0 in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00 fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30 ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60 ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80 ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10 ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0 ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0 pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00 ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0 swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60 ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 12 tid 100033 ] Stopped at kdb_enter+0x33: movq $0,0x121da42(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 0 dynamic pcpu = 0xa075c0 curthread = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0" curpcb = 0xfffff80004628cd0 fpcurthread = none idlethread = 0xfffff8000460b780: tid 100003 "idle: cpu0" self = 0xffffffff82610000 curpmap = 0xffffffff81d9f520 tssp = 0xffffffff82610384 rsp0 = 0xfffffe008baf1000 kcr3 = 0x800000000259b002 ucr3 = 0xffffffffffffffff scr3 = 0x1ea78f998 gs32p = 0xffffffff82610404 ldt = 0xffffffff82610444 tss = 0xffffffff82610434 curvnet = 0xfffff80003239580 spin locks held: db:0:kdb.enter.panic> reset Uptime: 1h26m32s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26941' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./auto-shutdown x ./run.sh x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh x ./run-kyua.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins15322653353805878485.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'a7d9c69fa903ad880f9dd36505f9d824f668283e', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../a7d9c69fa903ad880f9dd36505f9d824f668283e/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?803867447.715.1760041591836>