Date: Tue, 18 Sep 2001 07:41:45 +0200 From: Thorsten Hempel <mail@hempel-siegwarth.de> To: freebsd-stable@freebsd.org Subject: /kernel: i4b-L1 ifpi_isac_irq: unit 0: CRC error Message-ID: <3BA6DE99.4436E7D2@hempel-siegwarth.de>
next in thread | raw e-mail | index | archive | help
Hello,
I installed freebsd 4.3 last night on my old P100 with 64mb and a AVM
Fritz Card PCI. It should run as a isdn-gateway for my network. The
kernel compilation with i4b-00.96.00 runs without a problem and the rest
of the isdn configuration I want to do later. After the reboot I have
got this messages permanently on stdout:
Sep 17 07:25:00 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: CRC error
Sep 17 07:25:00 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: Receive
Aborted error
When I do a "Warm Boot" to my Linux System, I have got this messages:
Sep 17 09:56:44 gateway kernel: ippp0: dialing 10 0191011...
Sep 17 09:56:50 gateway kernel: isdn: HiSax,ch0 cause: E001B
Sep 17 09:56:52 gateway kernel: isdn_net: local hangup ippp0
Because of this, I must "Power Off" my box to run the isdn on Linux
again.
I am new to FreeBSD and I donīt not what Infoīs you need, here is all
what I got:
1) dmesg
2) /var/log/messages
3) Kernel CONF
4) ifconfig
can anyone help me ?
Thanks in advance
Thorsten
==============dmesg==============================
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.3-RELEASE #0: Sun Sep 16 21:13:44 GMT 2001
root@gateway.weiss.nich:/usr/src/sys/compile/GATEWAY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (100.07-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 60870656 (59444K bytes)
Preloaded elf kernel "kernel" at 0xc0462000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc046209c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
atapci0: <Generic PCI ATA controller> mem 0xf4000000-0xf4001fff at
device 1.0 on pci0
atapci0: Busmastering DMA not supported
rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem
0xf4002000-0xf40020ff irq 11 at device 8.0 on pci0
rl0: Ethernet address: 00:e0:7d:74:bc:7b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <S3 ViRGE DX/GX graphics accelerator> at 9.0 irq 10
ifpi0: <AVM Fritz!Card PCI> port 0x6100-0x611f mem 0xf4003000-0xf400301f
irq 9 at device 10.0 on pci0
ifpi0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
ifpi0: passive stack unit 0
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header
compression)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 6197MB <IBM-DHEA-36481> [12592/16/63] at ata0-master BIOSPIO
acd0: CDROM <CD-540E> at ata1-master using BIOSPIO
Mounting root from ufs:/dev/ad0s2a
==============/var/log/messages==============================
Sep 17 07:21:52 gateway /kernel: Copyright (c) 1992-2001 The FreeBSD
Project.
Sep 17 07:21:52 gateway /kernel: Copyright (c) 1979, 1980, 1983, 1986,
1988, 1989, 1991, 1992, 1993, 1994
Sep 17 07:21:52 gateway /kernel: The Regents of the University of
California. All rights reserved.
Sep 17 07:21:52 gateway /kernel: FreeBSD 4.3-RELEASE #0: Sun Sep 16
21:13:44 GMT 2001
Sep 17 07:21:52 gateway /kernel:
root@gateway.weiss.nich:/usr/src/sys/compile/GATEWAY
Sep 17 07:21:52 gateway /kernel: Timecounter "i8254" frequency 1193182
Hz
Sep 17 07:21:52 gateway /kernel: CPU: Pentium/P54C (100.07-MHz 586-class
CPU)
Sep 17 07:21:52 gateway /kernel: Origin = "GenuineIntel" Id = 0x525
Stepping = 5
Sep 17 07:21:52 gateway /kernel:
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
Sep 17 07:21:52 gateway /kernel: real memory = 67108864 (65536K bytes)
Sep 17 07:21:52 gateway /kernel: config> di pcic0
Sep 17 07:21:52 gateway /kernel: config> di sn0
Sep 17 07:21:52 gateway /kernel: config> di lnc0
Sep 17 07:21:52 gateway /kernel: config> di ie0
Sep 17 07:21:52 gateway /kernel: config> di fe0
Sep 17 07:21:52 gateway /kernel: config> di ed0
Sep 17 07:21:52 gateway /kernel: config> di cs0
Sep 17 07:21:52 gateway /kernel: config> di bt0
Sep 17 07:21:52 gateway /kernel: config> di aic0
Sep 17 07:21:52 gateway /kernel: config> di aha0
Sep 17 07:21:52 gateway /kernel: config> di adv0
Sep 17 07:21:52 gateway /kernel: config> q
Sep 17 07:21:52 gateway /kernel: avail memory = 60870656 (59444K bytes)
Sep 17 07:21:52 gateway /kernel: Preloaded elf kernel "kernel" at
0xc0462000.
Sep 17 07:21:52 gateway /kernel: Preloaded userconfig_script
"/boot/kernel.conf" at 0xc046209c.
Sep 17 07:21:53 gateway /kernel: Intel Pentium detected, installing
workaround for F00F bug
Sep 17 07:21:53 gateway /kernel: md0: Malloc disk
Sep 17 07:21:53 gateway /kernel: npx0: <math processor> on motherboard
Sep 17 07:21:53 gateway /kernel: npx0: INT 16 interface
Sep 17 07:21:53 gateway /kernel: pcib0: <Host to PCI bridge> on
motherboard
Sep 17 07:21:53 gateway /kernel: pci0: <PCI bus> on pcib0
Sep 17 07:21:53 gateway /kernel: atapci0: <Generic PCI ATA controller>
mem 0xf4000000-0xf4001fff at device 1.0 on pci0
Sep 17 07:21:53 gateway /kernel: atapci0: Busmastering DMA not supported
Sep 17 07:21:53 gateway /kernel: rl0: <RealTek 8139 10/100BaseTX> port
0x6000-0x60ff mem 0xf4002000-0xf40020ff irq 11 at device 8.0 on pci0
Sep 17 07:21:53 gateway /kernel: rl0: Ethernet address:
00:e0:7d:74:bc:7b
Sep 17 07:21:53 gateway /kernel: miibus0: <MII bus> on rl0
Sep 17 07:21:53 gateway /kernel: rlphy0: <RealTek internal media
interface> on miibus0
Sep 17 07:21:53 gateway /kernel: rlphy0: 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto
Sep 17 07:21:53 gateway /kernel: pci0: <S3 ViRGE DX/GX graphics
accelerator> at 9.0 irq 10
Sep 17 07:21:53 gateway /kernel: ifpi0: <AVM Fritz!Card PCI> port
0x6100-0x611f mem 0xf4003000-0xf400301f irq 9 at device 10.0 on pci0
Sep 17 07:21:53 gateway /kernel: ifpi0: ISAC 2085 Version A1/A2 or
2086/2186 Version 1.1 (IOM-2)
Sep 17 07:21:53 gateway /kernel: ifpi0: passive stack unit 0
Sep 17 07:21:53 gateway /kernel: isa0: <ISA bus> on motherboard
Sep 17 07:21:53 gateway /kernel: fdc0: <NEC 72065B or clone> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Sep 17 07:21:53 gateway /kernel: fdc0: FIFO enabled, 8 bytes threshold
Sep 17 07:21:53 gateway /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive
0
Sep 17 07:21:53 gateway /kernel: ata0 at port 0x1f0-0x1f7,0x3f6 irq 14
on isa0
Sep 17 07:21:53 gateway /kernel: ata1 at port 0x170-0x177,0x376 irq 15
on isa0
Sep 17 07:21:53 gateway /kernel: atkbdc0: <Keyboard controller (i8042)>
at port 0x60,0x64 on isa0
Sep 17 07:21:53 gateway /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1
on atkbdc0
Sep 17 07:21:53 gateway /kernel: kbd0 at atkbd0
Sep 17 07:21:53 gateway /kernel: vga0: <Generic ISA VGA> at port
0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Sep 17 07:21:53 gateway /kernel: sc0: <System console> at flags 0x100 on
isa0
Sep 17 07:21:53 gateway /kernel: sc0: VGA <16 virtual consoles,
flags=0x300>
Sep 17 07:21:53 gateway /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags
0x10 on isa0
Sep 17 07:21:53 gateway /kernel: sio0: type 16550A
Sep 17 07:21:53 gateway /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Sep 17 07:21:53 gateway /kernel: sio1: type 16550A
Sep 17 07:21:53 gateway /kernel: ppc0: <Parallel port> at port
0x378-0x37f irq 7 on isa0
Sep 17 07:21:53 gateway /kernel: ppc0: Generic chipset (NIBBLE-only) in
COMPATIBLE mode
Sep 17 07:21:53 gateway /kernel: plip0: <PLIP network interface> on
ppbus0
Sep 17 07:21:53 gateway /kernel: lpt0: <Printer> on ppbus0
Sep 17 07:21:53 gateway /kernel: lpt0: Interrupt-driven port
Sep 17 07:21:53 gateway /kernel: ppi0: <Parallel I/O> on ppbus0
Sep 17 07:21:53 gateway /kernel: i4btel: 2 ISDN telephony interface
device(s) attached
Sep 17 07:21:53 gateway /kernel: i4brbch: 4 raw B channel access
device(s) attached
Sep 17 07:21:53 gateway /kernel: i4bipr: 4 IP over raw HDLC ISDN
device(s) attached (VJ header compression)
Sep 17 07:21:53 gateway /kernel: i4bctl: ISDN system control port
attached
Sep 17 07:21:53 gateway /kernel: i4btrc: 4 ISDN trace device(s) attached
Sep 17 07:21:53 gateway /kernel: i4bisppp: 4 ISDN SyncPPP device(s)
attached (VJ header compression)
Sep 17 07:21:53 gateway /kernel: i4b: ISDN call control device attached
Sep 17 07:21:53 gateway /kernel: ata1-slave: ata_command: timeout
waiting for intr
Sep 17 07:21:53 gateway /kernel: ata1-slave: identify failed
Sep 17 07:21:53 gateway /kernel: ad0: 6197MB <IBM-DHEA-36481>
[12592/16/63] at ata0-master BIOSPIO
Sep 17 07:21:53 gateway /kernel: acd0: CDROM <CD-540E> at ata1-master
using BIOSPIO
Sep 17 07:21:53 gateway /kernel: Mounting root from ufs:/dev/ad0s2a
Sep 17 07:22:07 gateway login: ROOT LOGIN (root) ON ttyv0
Sep 17 07:22:52 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: CRC error
Sep 17 07:22:52 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: Receive
Aborted error
Sep 17 07:25:00 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: CRC error
Sep 17 07:25:00 gateway /kernel: i4b-L1 ifpi_isac_irq: unit 0: Receive
Aborted error
==============/usr/src/sys/i386/conf/GATEWAY==============================
#
# GATEWAY -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you
are
# in doubt as to the purpose or necessity of a line, check first in
LINT.
#
# $FreeBSD: src/sys/i386/conf/GATEWAY,v 1.246.2.24 2001/04/05 17:23:10
sos Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
cpu I586_CPU
#cpu I686_CPU
ident GATEWAY
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options EXT2FS
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing
SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor
Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices
when
# both sym and ncr are configured
device adv0 at isa?
device adw
device bt0 at isa?
device aha0 at isa?
device aic0 at isa?
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI
access)
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
device dpt # DPT Smartcache - See LINT for options!
device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
device aac # Adaptec FSA RAID, Dell PERC2/PERC3
device ida # Compaq Smart RAID
device amr # AMI MegaRAID
device mlx # Mylex DAC960 family
device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt
console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device fxp # Intel EtherExpress PRO/100B (82557,
82558)
device tx # SMC 9432TX (83c170 ``EPIC'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
device wx # Intel Gigabit Ethernet Card
(``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device pcn # AMD Am79C79x PCI 10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS
7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'',
``Cyclone'')
# ISA Ethernet NICs.
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
device ex
device ep
device fe0 at isa? port 0x300
# Xircom Ethernet
device xe
# PRISM I IEEE 802.11b wireless NIC.
device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below
will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device an
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
device cs0 at isa? port 0x300
device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus
and da
device ums # Mouse
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
#
#===============i4b-00.96.00==============================================
## ==============
## AVM Fritz!Card PCI
## ------------------
device ifpi0
##
## ------------------------------------------------------------
##
##
## ISDN Protocol Stack
## -------------------
##
## Q.921 / layer 2 - i4b passive cards D channel handling
pseudo-device "i4bq921"
##
##
## Q.931 / layer 3 - i4b passive cards D channel handling
pseudo-device "i4bq931"
##
##
## layer 4 - i4b common passive and active card handling
pseudo-device "i4b"
##
##
## ISDN devices
## ------------
##
##
## userland driver to do ISDN tracing (for passive cards only)
pseudo-device "i4btrc" 4
##
##
## userland driver to control the whole thing
pseudo-device "i4bctl"
##
##
## userland driver for access to raw B channel
pseudo-device "i4brbch" 4
##
##
## userland driver for telephony
pseudo-device "i4btel" 2
##
##
## network driver for IP over raw HDLC ISDN
## enable VJ header compression detection for ipr i/f
options IPR_VJ
## enable logging of first 32 ip packets for ipr i/f's
#options IPR_LOG=32
pseudo-device "i4bipr" 4
##
##
## network driver for sync PPP over ISDN
pseudo-device "i4bisppp" 4
##
##---------------------------------------------------------------------------
==============ifconfig==============================
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.10.0.1 netmask 0xffffff00 broadcast 10.10.0.255
ether 00:e0:7d:74:bc:7b
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
ipr0: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ether 00:00:00:00:00:00
ipr1: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ether 00:00:00:00:00:00
ipr2: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ether 00:00:00:00:00:00
ipr3: flags=2810<POINTOPOINT,SIMPLEX,LINK1> mtu 1500
ether 00:00:00:00:00:00
isp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
isp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
isp2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
isp3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
faith0: flags=8000<MULTICAST> mtu 1500
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BA6DE99.4436E7D2>