Date: Mon, 3 Apr 2000 18:26:21 -0700 (PDT) From: tdwyer@bigpond.com To: freebsd-gnats-submit@FreeBSD.org Subject: kern/17779: ADIC 1200d (DAT changer) and Symbios SCSI controller: does not work as expected using chio Message-ID: <200004040126.SAA57865@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 17779 >Category: kern >Synopsis: ADIC 1200d (DAT changer) and Symbios SCSI controller: does not work as expected using chio >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Apr 3 18:30:00 PDT 2000 >Closed-Date: >Last-Modified: >Originator: Terry Dwyer >Release: FreeBSD-3.4-Stable #0: Mon Apr 3 06:51:46 WST 2000 >Organization: home >Environment: FreeBSD charon.ctnet.org.au 3.4-STABLE FreeBSD 3.4-STABLE #0: Mon Apr 3 06:51:46 WST 2000 tdwyer@charon.ctnet.org.au:/usr/src/sys/compile/CHARON i386 >Description: Machine: ASUS P2B motherboard Celeron 366 ADIC 1200D DAT Autochanger with WangDAT 3400DX DDS2 drive 2 X IDE drives 4 X SCSI drives 1 X SCSI CD ncr0: <ncr 53c875 fast20 wide scsi> rev 0x26 int a irq 11 on pci0.12.0 sa0 at ncr0 bus 0 target 3 lun 0 sa0: <WangDAT Model 3400DX 1.4a> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 16) ch0 at ncr0 bus 0 target 6 lun 0 ch0: <ADIC DAT AutoChanger 0458> Removable Changer SCSI-2 device ch0: 3.300MB/s transfers ch0: 12 slots, 1 drive, 1 picker, 1 portal Status after chio ielem: ( Tape slots all full, Drive 0 empty ) charon# chio params /dev/ch0: 12 slots, 1 drive, 1 picker, 1 portal /dev/ch0: current picker: 0 charon# chio status picker 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> slot 0: <INEAB,EXENAB,ACCESS,FULL> portal 0: <INEAB,EXENAB,ACCESS,FULL> drive 0: <INEAB,EXENAB,ACCESS,FULL> Tape slots are all shown as slot 0, status does not change after any action. Doing a chio status on a specific slot always produces the same result: slot 0: <INEAB,EXENAB,ACCESS,FULL> Doing a chio status on a the tape drive always produces the same result: drive 0: <INEAB,EXENAB,ACCESS,FULL> From what I've read, this seems to be a problem with the Symbios SCSI driver, that's why I've reported it as a kernel bug. I don't have an adaptec controller to test the changer with so I can't confirm that it's only a Symbios problem. I'm prepared to do any testing required by someone providing patches. >How-To-Repeat: Behaviour is the same every time >Fix: Unfortunately I have no fix >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004040126.SAA57865>