Date: Wed, 12 Jan 2000 06:41:10 -0500 From: lluisma <lluisma@osi-technologies.com> To: stable@freebsd.org Subject: 3.4-RELEASE and ThinkPad 770Z with 256MB memory Message-ID: <387C6856.2FA1CB42@osi-technologies.com>
next in thread | raw e-mail | index | archive | help
I attempted to install 3.4 and it hangs after displaying "Probing PnP
devices...". I was able to install RedHat Linux 6.1 but it only
recognize 64MB memory instead of 256(I fixed this by adding
append="mem=255M" to lilo.conf).
Any suggestions are highly appreciated.
Regards,
LLU
Linux version 2.2.12-20 (root@porky.devel.redhat.com) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:40:35
EDT 1999
Detected 363963129 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 362.91 BogoMIPS
Memory: 256432k/261120k available (1008k kernel code, 412k reserved,
2924k data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Mobile Pentium II stepping 0a
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd880
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DCYA-214000, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8171, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DCYA-214000, 7559MB w/420kB Cache, CHS=1023/240/63
hdc: ATAPI 20X DVD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 809.625 MB/sec
p5_mmx : 850.392 MB/sec
8regs : 625.221 MB/sec
32regs : 350.520 MB/sec
using fastest function: p5_mmx (850.392 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
Adding Swap: 529160k swap-space (priority -1)
Linux PCMCIA Card Services 3.0.14
kernel build: 2.2.12-20 #1 Mon Sep 27 10:40:35 EDT 1999
options: [pci] [cardbus] [apm]
Intel PCIC probe:
TI 1251A PCI-to-CardBus at bus 0 slot 2, mem 0x50103000, 2 sockets
host opts [0]: [ring] [pwr save] [isa irq] [no pci irq] [lat
168/176] [bus 2/4]
host opts [1]: [ring] [pwr save] [isa irq] [no pci irq] [lat
168/176] [bus 5/7]
ISA irqs (scanned) = 3,4,7,9,10 status change on irq 10
cs: IO port probe 0x1000-0x17ff: excluding 0x15e8-0x15ef
cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x200-0x207
0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
eth0: 3Com 3c589, io 0x300, irq 3, hw_addr 00:10:4B:EC:45:E4
8K FIFO split 5:3 Rx:Tx, auto xcvr
eth0: flipped to 10baseT
eth0: flipped to 10baseT
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?387C6856.2FA1CB42>