Date: Sat, 08 Dec 2001 07:00:09 -0800 From: Joseph Maxwell <jaymax@ns.net> To: questions@FreeBSD.ORG Subject: Runaway /var/log/mgetty.cuaa1 log file Message-ID: <3C122AF8.847ACD15@ns.net>
next in thread | raw e-mail | index | archive | help
Hello,
I have a runawy log file w/ approx. 576 line repeat, ~43 Kb per min. One
cyle is given below.
Seems to be modem related ????? but there is no modem in the system
How can this be corrected? or at least contained?
Running FreeBSD O/S v 4.2
on a 486 - 2DX platform config w/
dmesg output
o FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
o jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
o Timecounter "i8254" frequency 1193182 Hz
o CPU: i486 DX2 (486-class CPU)
o Origin = "GenuineIntel" Id = 0x435 Stepping = 5
o Features=0x3<FPU,VME>
o real memory = 20971520 (20480K bytes)
o config> di sn0
o config> di lnc0
o config> di ie0
o config> di fe0
o config> di cs0
o config> q
o avail memory = 16314368 (15932K bytes)
o Preloaded elf kernel "kernel" at 0xc0436000.
o Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c.
o md0: Malloc disk
o npx0: <math processor> on motherboard
o npx0: INT 16 interface
o isa0: <ISA bus> on motherboard
o fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
o fd0: <1440-KB 3.5" drive> on fdc0 drive 0
o ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
o ata1 at port 0x170-0x177,0x376 irq 15 on isa0
o atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
o atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
o kbd0 at atkbd0
o vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
o sc0: <System console> at flags 0x100 on isa0
o sc0: VGA <16 virtual consoles, flags=0x300>
o sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
o sio0: type 16450
o sio1 at port 0x2f8-0x2ff irq 3 on isa0
o sio1: type 16450
o ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
o ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
o plip0: <PLIP network interface> on ppbus0
o lpt0: <Printer> on ppbus0
o lpt0: Interrupt-driven port
o ppi0: <Parallel I/O> on ppbus0
o ed0 at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
o ed0: address 00:40:05:a0:40:18, type NE2000 (16 bit)
o ad0: 2442MB <Maxtor 82560A4> [4962/16/63] at ata0-master
BIOSPIO
o ad1: 521MB <Maxtor 7546 AT> [1060/16/63] at ata0-slave BIOSPIO
o acd0: CDROM <CD-ROM Drive/G6D> at ata1-master using BIOSPIO
o Mounting root from ufs:/dev/ad0s1a
o ed0: promiscuous mode enabled
o pid 249 (man), uid 9 on /usr: file system full
o cd9660: Joliet Extension
------------------------------------------------------------------------------------------------------------
Log file output:
12/08 06:33:42 aa1 mgetty: experimental test release 1.1.22-Aug17
12/08 06:33:42 aa1 something foul in config line: '*** Configuring for
port cuaa1 ***'
12/08 06:33:42 aa1 (keyword '***' not found)
12/08 06:33:42 aa1 something foul in config line: '- `debug (mgetty)''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'This sets the amount
of logging `mgetty' will do. A good value is'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: '4, more details are
seen with `5', and `9' is really noisy. Try'
12/08 06:33:42 aa1 (keyword '4,' not found)
12/08 06:33:42 aa1 something foul in config line: 'it! The log data is
written to the file `/tmp/log_mg.cuaxx'.: [4]'
12/08 06:33:42 aa1 (keyword 'it!' not found)
12/08 06:33:42 aa1 something foul in config line: '- `fax-id''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'This sets the fax
station ID used in fax mode to identify your'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: 'site to the caller
(usually this is simply your fax phone number).'
12/08 06:33:42 aa1 (keyword 'site' not found)
12/08 06:33:42 aa1 something foul in config line: ': [00 00 000000]'
12/08 06:33:42 aa1 (keyword ':' not found)
12/08 06:33:42 aa1 something foul in config line: '- `speed''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specify, as integer
value, the port speed to use. Default is'
12/08 06:33:42 aa1 (keyword 'Specify,' not found)
12/08 06:33:42 aa1 something foul in config line: '38400. If the given
speed is not valid, `mgetty' complains loudly'
12/08 06:33:42 aa1 (keyword '38400.' not found)
12/08 06:33:42 aa1 something foul in config line: 'and exits.: [38400]'
12/08 06:33:42 aa1 (keyword 'and' not found)
12/08 06:33:42 aa1 something foul in config line: '- `switchbd''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Some modems, mainly
Rockwell chipsets, switch to 19200 bps when'
12/08 06:33:42 aa1 (keyword 'Some' not found)
12/08 06:33:42 aa1 something foul in config line: 'entering fax mode.
Others may need other speed switches (but I'
12/08 06:33:42 aa1 (keyword 'entering' not found)
12/08 06:33:42 aa1 something foul in config line: 'know none). If your
modem is Rockwell based, try `switchbd 19200''
12/08 06:33:42 aa1 (keyword 'know' not found)
12/08 06:33:42 aa1 something foul in config line: 'if fax reception
doesn't work. (*Warning:* if this is set wrongly,'
12/08 06:33:42 aa1 (keyword 'if' not found)
12/08 06:33:42 aa1 something foul in config line: 'fax reception will
definitely fail. For most sane modems, you do'
12/08 06:33:42 aa1 (keyword 'fax' not found)
12/08 06:33:42 aa1 something foul in config line: '*not need* this.).
Set speed or `0':'
12/08 06:33:42 aa1 (keyword '*not' not found)
12/08 06:33:42 aa1 something foul in config line: '- `direct''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty that it
is running on a direct line. Mgetty won't try'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'to initialize any
modem, nor will it wait for `RING'. It will just'
12/08 06:33:42 aa1 (keyword 'to' not found)
12/08 06:33:42 aa1 something foul in config line: 'wait for any
character, and then output the issue file and login'
12/08 06:33:42 aa1 (keyword 'wait' not found)
12/08 06:33:42 aa1 something foul in config line: 'prompt. This option
is used if you want to connect to machines via'
12/08 06:33:42 aa1 (keyword 'prompt.' not found)
12/08 06:33:42 aa1 something foul in config line: 'nullmodem cable.:
[NO]'
12/08 06:33:42 aa1 (keyword 'nullmodem' not found)
12/08 06:33:42 aa1 something foul in config line: '- `blocking''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty to open
the device in `blocking' mode, that is, the'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: '`open()' system call
won't succeed until carrier detect is set.'
12/08 06:33:42 aa1 (keyword '`open()'' not found)
12/08 06:33:42 aa1 something foul in config line: 'This is set if
`mgetty' is called as `getty'. I'm not sure whether'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: 'it's very useful,
but I include it for completeness: [NO]'
12/08 06:33:42 aa1 (keyword 'it's' not found)
12/08 06:33:42 aa1 something foul in config line: '- `port-owner''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'If set, mgetty will
`chown' the tty line to the given username (you'
12/08 06:33:42 aa1 (keyword 'If' not found)
12/08 06:33:42 aa1 something foul in config line: 'can specify a string
or an integer uid, but the integer must be'
12/08 06:33:42 aa1 (keyword 'can' not found)
12/08 06:33:42 aa1 something foul in config line: 'valid). This is
highly recommended for security purposes: only'
12/08 06:33:42 aa1 (keyword 'valid).' not found)
12/08 06:33:42 aa1 something foul in config line: 'give port access to
those users you trust not to misuse your modem'
12/08 06:33:42 aa1 (keyword 'give' not found)
12/08 06:33:42 aa1 something foul in config line: 'lines!: [uucp]'
12/08 06:33:42 aa1 (keyword 'lines!:' not found)
12/08 06:33:42 aa1 something foul in config line: '- `port-group''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'If set, mgetty will
`chgrp' the tty line to this group id (which'
12/08 06:33:42 aa1 (keyword 'If' not found)
12/08 06:33:42 aa1 something foul in config line: 'can be given as
group name, or as integer gid). If it's not given,'
12/08 06:33:42 aa1 (keyword 'can' not found)
12/08 06:33:42 aa1 something foul in config line: 'or not valid, the
primary group id of `port-owner''
12/08 06:33:42 aa1 (keyword 'or' not found)
12/08 06:33:42 aa1 something foul in config line: 'will be used.:
[uucp]'
12/08 06:33:42 aa1 (keyword 'will' not found)
12/08 06:33:42 aa1 something foul in config line: '- `port-mode''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specifies the
permissions to `chmod' the device to.'
12/08 06:33:42 aa1 (keyword 'Specifies' not found)
12/08 06:33:42 aa1 something foul in config line: '*Never* make a modem
device world-accessible, better use `0660''
12/08 06:33:42 aa1 (keyword '*Never*' not found)
12/08 06:33:42 aa1 something foul in config line: 'or even `0600'.:
[0660]'
12/08 06:33:42 aa1 (keyword 'or' not found)
12/08 06:33:42 aa1 something foul in config line: '- `toggle-dtr''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty whether
it should lower the DTR line upon startup to'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'reset modem. Default
is `yes', but some (few) modems react'
12/08 06:33:42 aa1 (keyword 'reset' not found)
12/08 06:33:42 aa1 something foul in config line: 'allergic to that and
crash.: [YES]'
12/08 06:33:42 aa1 (keyword 'allergic' not found)
12/08 06:33:42 aa1 something foul in config line: '-
`toggle-dtr-waittime''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specifies the time
(in ms) to hold the DTR line low.: [500]'
12/08 06:33:42 aa1 (keyword 'Specifies' not found)
12/08 06:33:42 aa1 something foul in config line: '- `data-only''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells `mgetty' to
forget about faxing and only use the data part of'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'the modem. Default
is `false'. You need this if your modem can't'
12/08 06:33:42 aa1 (keyword 'the' not found)
12/08 06:33:42 aa1 something foul in config line: 'distinguish incoming
fax and data calls.: [NO]'
12/08 06:33:42 aa1 (keyword 'distinguish' not found)
12/08 06:33:42 aa1 something foul in config line: '- `fax-only''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells `mgetty' to
put the modem in fax-only mode. You need this if'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'your modem can't
distinguish incoming fax and data calls, but you'
12/08 06:33:42 aa1 (keyword 'your' not found)
12/08 06:33:42 aa1 something foul in config line: 'need fax more
important than data; and you need it if you want to'
12/08 06:33:42 aa1 (keyword 'need' not found)
12/08 06:33:42 aa1 something foul in config line: 'disable data calls
for security reasons (this could be achieved'
12/08 06:33:42 aa1 (keyword 'disable' not found)
12/08 06:33:42 aa1 something foul in config line: 'via `login.config'
as well): [NO]'
12/08 06:33:42 aa1 (keyword 'via' not found)
12/08 06:33:42 aa1 something foul in config line: '- `modem-type''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specifies the kind
of modem connected to the port. Valid options are:'
12/08 06:33:42 aa1 (keyword 'Specifies' not found)
12/08 06:33:42 aa1 something foul in config line: '* auto'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Mgetty will detect
the modem type itself (which may occasionally'
12/08 06:33:42 aa1 (keyword 'Mgetty' not found)
12/08 06:33:42 aa1 something foul in config line: 'be not desirable, or
it may fail on old modem equipment).'
12/08 06:33:42 aa1 (keyword 'be' not found)
12/08 06:33:42 aa1 something foul in config line: '* c2.0'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Modem is a CLASS 2.0
fax mode. Works better than class 2, if'
12/08 06:33:42 aa1 (keyword 'Modem' not found)
12/08 06:33:42 aa1 something foul in config line: 'both are available,
because its better standardized. Known to'
12/08 06:33:42 aa1 (keyword 'both' not found)
12/08 06:33:42 aa1 something foul in config line: 'work with USR and
ZyXEL.'
12/08 06:33:42 aa1 (keyword 'work' not found)
12/08 06:33:42 aa1 something foul in config line: '* cls2'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Modem is a CLASS 2
fax modem, mgetty will not try class 2.0.'
12/08 06:33:42 aa1 (keyword 'Modem' not found)
12/08 06:33:42 aa1 something foul in config line: '* data'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Do not try fax
initialization'
12/08 06:33:42 aa1 (keyword 'Do' not found)
12/08 06:33:42 aa1 something foul in config line: 'There is no way
(yet) to tell mgetty to use *only* fax mode and'
12/08 06:33:42 aa1 (keyword 'There' not found)
12/08 06:33:42 aa1 something foul in config line: 'refuse data calls
with this option, use the `fax-only true''
12/08 06:33:42 aa1 (keyword 'refuse' not found)
12/08 06:33:42 aa1 something foul in config line: 'statement for that.:
[auto]'
12/08 06:33:42 aa1 (keyword 'statement' not found)
12/08 06:33:42 aa1 something foul in config line: '- `init-chat''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty the
chat sequence to use for initializing the modem.'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: '*Warning*: the
sequence starts with *expect*, which will in most'
12/08 06:33:42 aa1 (keyword '*Warning*:' not found)
12/08 06:33:42 aa1 something foul in config line: 'cases be `""'
(nothing). This ordering was chosen because UUCP'
12/08 06:33:42 aa1 (keyword 'cases' not found)
12/08 06:33:42 aa1 something foul in config line: 'does it this way,
and I wanted to avoid confusion here.'
12/08 06:33:42 aa1 (keyword 'does' not found)
12/08 06:33:42 aa1 something foul in config line: 'Example: '
12/08 06:33:42 aa1 (keyword 'Example:' not found)
12/08 06:33:42 aa1 something foul in config line: '""
\d\d\d+++\d\d\dATQ0E1V1H0 OK ATL0M0S0=0 OK AT&K3 OK'
12/08 06:33:42 aa1 (keyword '""' not found)
12/08 06:33:42 aa1 something foul in config line: 'init sequence: [""
ATS0=0Q0&D3&C1 OK]'
12/08 06:33:42 aa1 (keyword 'init' not found)
12/08 06:33:42 aa1 something foul in config line: '- `force-init-chat''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'In some cases, the
modem can get stuck in a mode where it won't'
12/08 06:33:42 aa1 (keyword 'In' not found)
12/08 06:33:42 aa1 something foul in config line: 'react to a simple
`AT' command. Usually this happens because the'
12/08 06:33:42 aa1 (keyword 'react' not found)
12/08 06:33:42 aa1 something foul in config line: 'modem is set to
ignore a DTR drop and still has a data connection'
12/08 06:33:42 aa1 (keyword 'modem' not found)
12/08 06:33:42 aa1 something foul in config line: 'to the other side.
If you use a voice modem, it could be stuck in'
12/08 06:33:42 aa1 (keyword 'to' not found)
12/08 06:33:42 aa1 something foul in config line: 'voice mode.'
12/08 06:33:42 aa1 (keyword 'voice' not found)
12/08 06:33:42 aa1 something foul in config line: 'In these situations,
the normal `init-chat' will time out, because'
12/08 06:33:42 aa1 (keyword 'In' not found)
12/08 06:33:42 aa1 something foul in config line: 'the modem won't send
the proper responses back.'
12/08 06:33:42 aa1 (keyword 'the' not found)
12/08 06:33:42 aa1 something foul in config line: 'To get the modem
back into a sane state, you can use the'
12/08 06:33:42 aa1 (keyword 'To' not found)
12/08 06:33:42 aa1 something foul in config line: '`force-init-chat'
chat sequence. The default setup will send the'
12/08 06:33:42 aa1 (keyword '`force-init-chat'' not found)
12/08 06:33:42 aa1 something foul in config line: 'DLE ETX characters,
to get voice modems back to life, and then the'
12/08 06:33:42 aa1 (keyword 'DLE' not found)
12/08 06:33:42 aa1 something foul in config line:
'`(pause)+++(pause)ATH0' sequence to get the modem back from data'
12/08 06:33:42 aa1 (keyword '`(pause)+++(pause)ATH0'' not found)
12/08 06:33:42 aa1 something foul in config line: 'mode to command
mode.'
12/08 06:33:42 aa1 (keyword 'mode' not found)
12/08 06:33:42 aa1 something foul in config line: 'You could prepend
this sequence to `init-chat' (it wouldn't harm),'
12/08 06:33:42 aa1 (keyword 'You' not found)
12/08 06:33:42 aa1 something foul in config line: 'but especially the
pauses around the +++ sequence makes this'
12/08 06:33:42 aa1 (keyword 'but' not found)
12/08 06:33:42 aa1 something foul in config line: 'undesirable slow.:'
12/08 06:33:42 aa1 (keyword 'undesirable' not found)
12/08 06:33:42 aa1 something foul in config line: '-
`modem-check-time''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Some modems have the
nasty tendency to crash silently. With this'
12/08 06:33:42 aa1 (keyword 'Some' not found)
12/08 06:33:42 aa1 something foul in config line: 'option, you tell
`mgetty' to check every SECONDS seconds with a'
12/08 06:33:42 aa1 (keyword 'option,' not found)
12/08 06:33:42 aa1 something foul in config line: 'simple `AT...OK'
sequence whether the modem still reacts. If not,'
12/08 06:33:42 aa1 (keyword 'simple' not found)
12/08 06:33:42 aa1 something foul in config line: '`mgetty' will
restart itself and do a full modem reset.: [3600]'
12/08 06:33:42 aa1 (keyword '`mgetty'' not found)
12/08 06:33:42 aa1 something foul in config line: '- `rings''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Sets the number of
`RING' messages to wait for, before mgetty'
12/08 06:33:42 aa1 (keyword 'Sets' not found)
12/08 06:33:42 aa1 something foul in config line: 'picks up the phone.
*Warning:* if your modem auto-answers, for'
12/08 06:33:42 aa1 (keyword 'picks' not found)
12/08 06:33:42 aa1 something foul in config line: 'whatever reason, set
this to something *different* than the'
12/08 06:33:42 aa1 (keyword 'whatever' not found)
12/08 06:33:42 aa1 something foul in config line: 'value set with
`ATS0=mmm', otherwise the modems autoanswer and'
12/08 06:33:42 aa1 (keyword 'value' not found)
12/08 06:33:42 aa1 something foul in config line: 'mgettys manual
answer will collide (most modems hang up if a'
12/08 06:33:42 aa1 (keyword 'mgettys' not found)
12/08 06:33:42 aa1 something foul in config line: 'command is received
during auto-answer): [1]'
12/08 06:33:42 aa1 (keyword 'command' not found)
12/08 06:33:42 aa1 something foul in config line: '- `answer-chat''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'This is the command
sequence that is used to answer a phone call.'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: 'Usually you can
leave it at the default ` "" ATA CONNECT \c \r ','
12/08 06:33:42 aa1 (keyword 'Usually' not found)
12/08 06:33:42 aa1 something foul in config line: 'but for some modems
you need `ATS0=1' in place of `ATA' (ATA not'
12/08 06:33:43 aa1 (keyword 'but' not found)
12/08 06:33:43 aa1 something foul in config line: 'allowed). The extra
`\r' expect string is needed that the code can'
12/08 06:33:43 aa1 (keyword 'allowed).' not found)
12/08 06:33:43 aa1 something foul in config line: 'grab the full
CONNECT XYZ\R string. It will work without the \r,'
12/08 06:33:43 aa1 (keyword 'grab' not found)
12/08 06:33:43 aa1 something foul in config line: 'but then the logging
information will be less detailed. *Right now,'
12/08 06:33:43 aa1 (keyword 'but' not found)
12/08 06:33:43 aa1 something foul in config line: '\r won't work at
all, it's not implemented yet. Don't use it.*'
12/08 06:33:43 aa1 (keyword '\r' not found)
12/08 06:33:43 aa1 something foul in config line: ': ["" ATA CONNECT \c
\r]'
12/08 06:33:43 aa1 (keyword ':' not found)
12/08 06:33:43 aa1 something foul in config line: '-
`answer-chat-timeout''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'During the
ANSWER-CHAT, each "expect" string must be seen in the'
12/08 06:33:43 aa1 (keyword 'During' not found)
12/08 06:33:43 aa1 something foul in config line: 'time specified here.
Default is 80 seconds. This time should be at'
12/08 06:33:43 aa1 (keyword 'time' not found)
12/08 06:33:43 aa1 something foul in config line: 'least some 5 seconds
longer than the time set with the `ATS7=...''
12/08 06:33:43 aa1 (keyword 'least' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem setup
command.: [80]'
12/08 06:33:43 aa1 (keyword 'modem' not found)
12/08 06:33:43 aa1 something foul in config line: '- `autobauding''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Some modems switch
their DTE line speed to the communication line'
12/08 06:33:43 aa1 (keyword 'Some' not found)
12/08 06:33:43 aa1 something foul in config line: 'speed after
connecting, e.g., after sending `CONNECT 2400', the'
12/08 06:33:43 aa1 (most likely syntax error)
12/08 06:33:43 aa1 something foul in config line: 'modem switches to
2400 bps. Newer modems usually have a switch to'
12/08 06:33:43 aa1 (keyword 'modem' not found)
12/08 06:33:43 aa1 something foul in config line: '"lock" a DTE baud
rate, which is strongly recommended. If your'
12/08 06:33:43 aa1 (keyword '"lock"' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem insists on
doing this speed switch, setting `autobauding' to'
12/08 06:33:43 aa1 (keyword 'modem' not found)
12/08 06:33:43 aa1 something foul in config line: 'YES will make mgetty
behave accordingly.: [NO]'
12/08 06:33:43 aa1 (keyword 'YES' not found)
12/08 06:33:43 aa1 something foul in config line: '- `ringback''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If you have to put
your modem and your telephone on the same phone'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'line, you can switch
on "ringback" or "ring-twice". This means,'
12/08 06:33:43 aa1 (keyword 'line,' not found)
12/08 06:33:43 aa1 something foul in config line: 'mgetty won't answer
the phone on the first call, but remember the'
12/08 06:33:43 aa1 (keyword 'mgetty' not found)
12/08 06:33:43 aa1 something foul in config line: 'call, and pick up on
the second call (if it comes in the time'
12/08 06:33:43 aa1 (keyword 'call,' not found)
12/08 06:33:43 aa1 something foul in config line: 'specified by
`ringback-time').: [NO]'
12/08 06:33:43 aa1 (keyword 'specified' not found)
12/08 06:33:43 aa1 something foul in config line: '- `ringback-time''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This setting
specifies how much time may pass between the first'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'and the second call
if "ringback" is active.: [30]'
12/08 06:33:43 aa1 (keyword 'and' not found)
12/08 06:33:43 aa1 something foul in config line: '- `ignore-carrier''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If your Modem does
not assert the DCD (carrier detect) line, or the'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'serial port or cable
or serial driver is broken, it is possible'
12/08 06:33:43 aa1 (keyword 'serial' not found)
12/08 06:33:43 aa1 something foul in config line: 'that `mgetty' or
`login' will block after a successful CONNECT'
12/08 06:33:43 aa1 (keyword 'that' not found)
12/08 06:33:43 aa1 something foul in config line: '(that means:
everything seems to work, but suddenly nothing is sent'
12/08 06:33:43 aa1 (keyword '(that' not found)
12/08 06:33:43 aa1 something foul in config line: 'to the port anymore.
Depending on the operating system used, this'
12/08 06:33:43 aa1 (keyword 'to' not found)
12/08 06:33:43 aa1 something foul in config line: 'can be before
printing the `/etc/issue' file or not before printing'
12/08 06:33:43 aa1 (keyword 'can' not found)
12/08 06:33:43 aa1 something foul in config line: 'the `password:'
prompt.'
12/08 06:33:43 aa1 (keyword 'the' not found)
12/08 06:33:43 aa1 something foul in config line: 'To work around this,
you can switch off the carrier detection in'
12/08 06:33:43 aa1 (keyword 'To' not found)
12/08 06:33:43 aa1 something foul in config line: 'software: set
`ignore-carrier true'. Default is `false'.'
12/08 06:33:43 aa1 (keyword 'software:' not found)
12/08 06:33:43 aa1 something foul in config line: '*WARNING:* If you
use this, your system won't be able to detect'
12/08 06:33:43 aa1 (keyword '*WARNING:*' not found)
12/08 06:33:43 aa1 something foul in config line: 'when a caller just
hangs up instead of cleanly logging out. This'
12/08 06:33:43 aa1 (keyword 'when' not found)
12/08 06:33:43 aa1 something foul in config line: 'may result in
hanging modems, etc.: [false]'
12/08 06:33:43 aa1 (keyword 'may' not found)
12/08 06:33:43 aa1 something foul in config line: '- `issue-file''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is the file
printed before the login prompt.: [/etc/issue]'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: '- `prompt-waittime''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This specifies how
long `mgetty' will wait for modem and line to'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'settle down (in ms)
before printing issue file and login prompt: [500]'
12/08 06:33:43 aa1 (keyword 'settle' not found)
12/08 06:33:43 aa1 something foul in config line: '- `login-prompt''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This specifies the
login prompt that mgetty will output. Some'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'special characters
in this string (and in the issue file, btw) are'
12/08 06:33:43 aa1 (keyword 'special' not found)
12/08 06:33:43 aa1 something foul in config line: 'recognized and
replaced by something else:'
12/08 06:33:43 aa1 (keyword 'recognized' not found)
12/08 06:33:43 aa1 something foul in config line: '* @ system name'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \n newline'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \r carriage
return'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \g bell'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \b backspace
(ascii 010)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \f form feed
(ascii 013)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \t TAB'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \P (and \L) port
name (e.g. ttyS0)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \C date and time,
in "ctime()" format'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \I Connection
string (e.g. 2400/REL)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \N (and \U) number
of users currently logged in'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \S Port speed
(e.g. 38400)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \D current date in
dd/mm/yy format'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \T current time in
hh:mm:ss format'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \DIGIT character
with the specified octal code'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: 'The maximum lenght
of the login prompt is limited to 140'
12/08 06:33:43 aa1 (keyword 'The' not found)
12/08 06:33:43 aa1 something foul in config line: 'characters (after
expansion).: [@!login: ]'
12/08 06:33:43 aa1 (keyword 'characters' not found)
12/08 06:33:43 aa1 something foul in config line: '- `login-time''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This specifies the
maximum time the user can take to log in. If no'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'login has occured
after that time, `mgetty' will hang up.: [240]'
12/08 06:33:43 aa1 (keyword 'login' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-server-file''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies the fax
file(s) that is to be sent if someone else calls'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: 'your modem in *fax
polling mode*, that is, the caller *receives* a'
12/08 06:33:43 aa1 (keyword 'your' not found)
12/08 06:33:43 aa1 something foul in config line: 'document. '
12/08 06:33:43 aa1 (keyword 'document.' not found)
12/08 06:33:43 aa1 something foul in config line: 'Normally, the file
given is a text file, containing the list of G3'
12/08 06:33:43 aa1 (keyword 'Normally,' not found)
12/08 06:33:43 aa1 something foul in config line: 'files to send to the
calling machine, one file per line. Comment'
12/08 06:33:43 aa1 (keyword 'files' not found)
12/08 06:33:43 aa1 something foul in config line: 'lines (starting with
"#") are ignored. For backward compatibility,'
12/08 06:33:43 aa1 (keyword 'lines' not found)
12/08 06:33:43 aa1 something foul in config line: '`mgetty' does check
whether the named file is a G3 file itself, in'
12/08 06:33:43 aa1 (keyword '`mgetty'' not found)
12/08 06:33:43 aa1 something foul in config line: 'which case this file
is sent directly (but then, you can only send'
12/08 06:33:43 aa1 (keyword 'which' not found)
12/08 06:33:43 aa1 something foul in config line: 'one page).'
12/08 06:33:43 aa1 (keyword 'one' not found)
12/08 06:33:43 aa1 something foul in config line: 'Not all modems
support fax poll *server* mode, I know that the'
12/08 06:33:43 aa1 (keyword 'Not' not found)
12/08 06:33:43 aa1 something foul in config line: 'ZyXEL and MultiTech
do.:'
12/08 06:33:43 aa1 (keyword 'ZyXEL' not found)
12/08 06:33:43 aa1 something foul in config line: '- `diskspace''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This setting tells
mgetty the minimum amount of disk space (in KB) that'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'has to be available
in the fax spool directory for fax reception'
12/08 06:33:43 aa1 (keyword 'has' not found)
12/08 06:33:43 aa1 something foul in config line: 'to be allowed.:
[1024]'
12/08 06:33:43 aa1 (keyword 'to' not found)
12/08 06:33:43 aa1 something foul in config line: '- `notify''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is the address
that will get mails if a fax is received. Not'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'fully tested.:
[faxadmin]'
12/08 06:33:43 aa1 (keyword 'fully' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-owner''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set, mgetty will
`chown' the received files to the given username'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: '(you can specify a
string or an integer uid, but the integer must be'
12/08 06:33:43 aa1 (keyword '(you' not found)
12/08 06:33:43 aa1 something foul in config line: 'valid).: [uucp]'
12/08 06:33:43 aa1 (keyword 'valid).:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-group''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set, mgetty will
`chgrp' the received files to this group id'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: '(which can be given
as group name, or as integer gid).: [modem]'
12/08 06:33:43 aa1 (keyword '(which' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-mode''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies the
permissions to `chmod' the received files.: [0660]'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: '- `debug (sendfax)''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'controls the amount
of information written into the fax log file.'
12/08 06:33:43 aa1 (keyword 'controls' not found)
12/08 06:33:43 aa1 something foul in config line: '`0' means "totally
silent" (not even errors are written), `9''
12/08 06:33:43 aa1 (keyword '`0'' not found)
12/08 06:33:43 aa1 something foul in config line: 'is really noisy. I
usually use `3' or `4' in normal use, and `6''
12/08 06:33:43 aa1 (keyword 'is' not found)
12/08 06:33:43 aa1 something foul in config line: 'for debugging.: [4]'
12/08 06:33:43 aa1 (keyword 'for' not found)
12/08 06:33:43 aa1 something foul in config line: '- `modem-init''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies an `AT...'
command that is to be sent to the modem right'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: 'at the *beginning*
of all modem talk (even before setting the modem'
12/08 06:33:43 aa1 (keyword 'at' not found)
12/08 06:33:43 aa1 something foul in config line: 'into fax mode, so
this could be an `ATZ' if you want to reset the'
12/08 06:33:43 aa1 (keyword 'into' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem).: '
12/08 06:33:43 aa1 (keyword 'modem).:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `modem-handshake''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies an `AT...'
command that will be sent to the modem at the'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: '*end* of the modem
initialization, right before dialing. *Do not'
12/08 06:33:43 aa1 (keyword '*end*' not found)
12/08 06:33:43 aa1 something foul in config line: 'use ATZ or such
here*, since resetting the modem will switch off'
12/08 06:33:43 aa1 (keyword 'use' not found)
12/08 06:33:43 aa1 something foul in config line: 'fax mode.: [AT&H3]'
12/08 06:33:43 aa1 (keyword 'fax' not found)
12/08 06:33:43 aa1 something foul in config line: '- `max-tries''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specify the maximum
number of tries per page if the receiving end'
12/08 06:33:43 aa1 (keyword 'Specify' not found)
12/08 06:33:43 aa1 something foul in config line: 'reports reception
errors. If NNN tries do not suffice to'
12/08 06:33:43 aa1 (keyword 'reports' not found)
12/08 06:33:43 aa1 something foul in config line: 'successfully
transmit a page, `sendfax' will give up or simply go'
12/08 06:33:43 aa1 (keyword 'successfully' not found)
12/08 06:33:43 aa1 something foul in config line: 'on, depending on the
setting of `max-tries-continue' (see below).'
12/08 06:33:43 aa1 (keyword 'on,' not found)
12/08 06:33:43 aa1 something foul in config line: 'If this is set to
`0', `sendfax' will ignore retransmission'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'requests and simply
go on.: [3]'
12/08 06:33:43 aa1 (keyword 'requests' not found)
12/08 06:33:43 aa1 something foul in config line: '-
`max-tries-continue''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'After the maximum
number of tries for one page are reached,'
12/08 06:33:43 aa1 (keyword 'After' not found)
12/08 06:33:43 aa1 something foul in config line: '`sendfax' can report
an error and abort (`max-tries-continue NO'),'
12/08 06:33:43 aa1 (keyword '`sendfax'' not found)
12/08 06:33:43 aa1 something foul in config line: 'or go on with the
next page (YES).'
12/08 06:33:43 aa1 (keyword 'or' not found)
12/08 06:33:43 aa1 something foul in config line: 'For "mission
critical" faxes, I'd set it to NO, but since the page'
12/08 06:33:43 aa1 (keyword 'For' not found)
12/08 06:33:43 aa1 something foul in config line: 'quality is most
often quite good even if reported as "page bad",'
12/08 06:33:43 aa1 (keyword 'quality' not found)
12/08 06:33:43 aa1 something foul in config line: 'the default is YES.:
[YES]'
12/08 06:33:43 aa1 (keyword 'the' not found)
12/08 06:33:43 aa1 something foul in config line: '- `speed''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Set the port speed
to use for fax send operations. Usually,'
12/08 06:33:43 aa1 (keyword 'Set' not found)
12/08 06:33:43 aa1 something foul in config line: '`38400' is a good
choice, but a few dumb modems (for example, some'
12/08 06:33:43 aa1 (keyword '`38400'' not found)
12/08 06:33:43 aa1 something foul in config line: 'based on rockwell
chipsets) need `19200' or even `9600'. A few'
12/08 06:33:43 aa1 (keyword 'based' not found)
12/08 06:33:43 aa1 something foul in config line: 'modems can go
higher, but `sendfax' may not support it, and it may'
12/08 06:33:43 aa1 (keyword 'modems' not found)
12/08 06:33:43 aa1 something foul in config line: 'not always work.:
[38400]'
12/08 06:33:43 aa1 (keyword 'not' not found)
12/08 06:33:43 aa1 something foul in config line: '- `dial-prefix''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is the command
used for dialing out. Usually this will be'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'something simple, as
`ATD' or `ATDP', but if you have an unusual'
12/08 06:33:43 aa1 (keyword 'something' not found)
12/08 06:33:43 aa1 something foul in config line: 'setup, it could also
be something like `ATX0DP0;X4DT' (meaning:'
12/08 06:33:43 aa1 (keyword 'setup,' not found)
12/08 06:33:43 aa1 something foul in config line: 'switch off dial-tone
detection, pulse-dial `0', back to command'
12/08 06:33:43 aa1 (keyword 'switch' not found)
12/08 06:33:43 aa1 something foul in config line: 'mode, switch on
dial-tone detection, and go ahead dialing with'
12/08 06:33:43 aa1 (keyword 'mode,' not found)
12/08 06:33:43 aa1 something foul in config line: 'touch tones). The
phone number will be sent right after the'
12/08 06:33:43 aa1 (keyword 'touch' not found)
12/08 06:33:43 aa1 something foul in config line: '`dial-prefix'.:
[ATD]'
12/08 06:33:43 aa1 (keyword '`dial-prefix'.:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `poll-dir''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is used to
specify a directory where polled faxes (wheather'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'maps and such) are
to be saved into. Default is the current'
12/08 06:33:43 aa1 (keyword 'maps' not found)
12/08 06:33:43 aa1 something foul in config line: 'directory.: [./]'
12/08 06:33:43 aa1 (keyword 'directory.:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `normal-res''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set to `yes' or
`true' (boolean), `sendfax' won't attempt to'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'make a fax
connection in "fine resolution" mode. Normally you'
12/08 06:33:43 aa1 (keyword 'make' not found)
12/08 06:33:43 aa1 something foul in config line: 'won't need to use
that option, since `faxrunq' will set the `-n''
12/08 06:33:43 aa1 (keyword 'won't' not found)
12/08 06:33:43 aa1 something foul in config line: 'switch if needed.:
[NO]'
12/08 06:33:43 aa1 (keyword 'switch' not found)
12/08 06:33:43 aa1 something foul in config line: '- `verbose''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set to `yes' or
`true', `sendfax' will output progress reports'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'on stdout, if set to
`no', `sendfax' will only print error and'
12/08 06:33:43 aa1 (keyword 'on' not found)
12/08 06:33:43 aa1 something foul in config line: 'warning messages.:
[NO]'
12/08 06:33:43 aa1 (keyword 'warning' not found)
12/08 06:33:43 aa1 something foul in config line: 'Settings for port
cuaa1'
12/08 06:33:43 aa1 (keyword 'Settings' not found)
12/08 06:33:43 aa1 something foul in config line:
'------------------------ '
12/08 06:33:43 aa1 (keyword '------------------------' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem-handshake
AT&H3'
12/08 06:33:43 aa1 (keyword 'modem-handshake' not found)
12/08 06:33:43 aa1 something foul in config line: 'max-tries 3'
12/08 06:33:43 aa1 (keyword 'max-tries' not found)
12/08 06:33:43 aa1 something foul in config line: 'max-tries-continue
YES'
12/08 06:33:43 aa1 (keyword 'max-tries-continue' not found)
12/08 06:33:43 aa1 something foul in config line: 'dial-prefix ATD'
12/08 06:33:43 aa1 (keyword 'dial-prefix' not found)
12/08 06:33:43 aa1 something foul in config line: 'poll-dir ./'
12/08 06:33:43 aa1 (keyword 'poll-dir' not found)
12/08 06:33:43 aa1 something foul in config line: 'normal-res NO'
12/08 06:33:43 aa1 (keyword 'normal-res' not found)
12/08 06:33:43 aa1 something foul in config line: 'verbose NO'
12/08 06:33:43 aa1 (keyword 'verbose' not found)
12/08 06:33:43 aa1 something foul in config line: 'OK?: [y]'
12/08 06:33:43 aa1 (keyword 'OK?:' not found)
12/08 06:33:43 aa1 check for lockfiles
12/08 06:33:43 aa1 locking the line
12/08 06:33:43 aa1 WARNING: DSR is off - modem turned off or bad cable?
12/08 06:33:43 aa1 lowering DTR to reset Modem
12/08 06:33:44 aa1 send: ATS0=0Q0&D3&C1[0d]
12/08 06:33:44 aa1 waiting for ``OK''
12/08 06:34:04 aa1 timeout in chat script, waiting for `OK'
12/08 06:34:04 aa1 init chat timed out, trying force-init-chat
12/08 06:34:04 aa1 send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
12/08 06:34:08 aa1 waiting for ``OK''
12/08 06:34:28 aa1 timeout in chat script, waiting for `OK'
12/08 06:34:28 aa1 init chat failed, exiting...: Interrupted system
call
12/08 06:34:28 ##### failed in mg_init_data, dev=cuaa1, pid=435
-----------------------------------------------------------------------------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C122AF8.847ACD15>