Date: Tue, 18 Jun 2002 19:37:48 +0200 From: Michael Bretterklieber <mbretter@inode.at> To: hardware@freebsd.org Subject: Re: snd_cmi.ko unable to detect SOYO Dragon plus! mobo's onboard CMI8338 soundcard Message-ID: <3D0F6FEC.20305@inode.at> References: <200206181834.32496.andreas.burmester@chello.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I have the same mobo and it works. Here are my kernel-params: device sbc device pcm BTW: I have problems on Windows 2000 with this mobo. The system hangs very often (freezing). I have no other cards in the mobo except the vga-card (Radeon VE). Do you have similar problems? bye, Andreas Burmester wrote: >Hi > >I got a SOYO Dragon plus mobo which has a CMI8338 onboard card and I cant get >my kernel to detect the card with the snd_cmi.ko loaded. Have anyone got this >working? I know that the card works since it runs in both linux and windows. > >MYKERNEL is the same as the GENERIC one, I just tried to add the pcm driver >and removed it again. > >The CMI8338 card is supported acording to the 4.5-RELEASE's hardware errat. > >Please add me to the CC: line if replying snice im not a part of this list. > >Any help would be most useful. > >Regards >-Andreas > >gandalf# uname -a >FreeBSD gandalf.chello.se 4.5-RELEASE FreeBSD 4.5-RELEASE #0: Mon Jun 17 >23:32:28 CEST 2002 root@gandalf.chello.se:/usr/src/sys/compile/MYKERNEL >i386 >gandalf# dmesg >Copyright (c) 1992-2002 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 4.5-RELEASE #0: Mon Jun 17 23:32:28 CEST 2002 > root@gandalf.chello.se:/usr/src/sys/compile/MYKERNEL >Timecounter "i8254" frequency 1193182 Hz >CPU: AMD Athlon(tm) XP 1600+ (1399.85-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 > >Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> >real memory = 536805376 (524224K bytes) >avail memory = 516456448 (504352K bytes) >Preloaded elf kernel "kernel" at 0xc05b2000. >Preloaded elf module "snd_cmi.ko" at 0xc05b209c. >Preloaded elf module "snd_pcm.ko" at 0xc05b213c. >Preloaded elf module "NVdriver.ko" at 0xc05b21dc. >Pentium Pro MTRR support enabled >md0: Malloc disk >Using $PIR table, 8 entries at 0xc00fdee0 >npx0: <math processor> on motherboard >npx0: INT 16 interface >pcib0: <Host to PCI bridge> on motherboard >pci0: <PCI bus> on pcib0 >pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 >pci1: <PCI bus> on pcib1 >NVdriver0: <NVIDIA> mem 0xe0000000-0xe7ffffff,0xec000000-0xecffffff irq 11 at >device 0.0 on pci1 >reg_physical_address = ec000000 >fb_physical_address = e0000000 >isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 17.1 on >pci0 >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 17.2 on >pci0 >usb0: <VIA 83C572 USB controller> on uhci0 >usb0: USB revision 1.0 >uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 17.3 on >pci0 >usb1: <VIA 83C572 USB controller> on uhci1 >usb1: USB revision 1.0 >uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 17.4 on >pci0 >usb2: <VIA 83C572 USB controller> on uhci2 >usb2: USB revision 1.0 >uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub2: 2 ports with 2 removable, self powered >vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem >0xee000000-0xee0000ff irq 11 at device 18.0 on pci0 >vr0: Ethernet address: 00:50:2c:04:3b:0b >miibus0: <MII bus> on vr0 >ukphy0: <Generic IEEE 802.3u media interface> on miibus0 >ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0 >fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >kbd0 at atkbd0 >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: model IntelliMouse Explorer, device ID 4 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 16550A >sio1 at port 0x2f8-0x2ff irq 3 on isa0 >sio1: type 16550A >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >plip0: <PLIP network interface> on ppbus0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master UDMA100 >ad1: 76319MB <WDC WD800BB-40BSA0> [155061/16/63] at ata0-slave UDMA100 >acd0: CD-RW <_NEC NR-7500A> at ata1-master using PIO4 >acd1: CDROM <Pioneer CD-ROM ATAPI Model DR-744 0102> at ata1-slave using PIO4 >Mounting root from ufs:/dev/ad0s1a >NV0: open by process 115 >NV0: regs=0xd7b7a000 >NV0: regs=0xd8b7a000 >fb_physical >fb_physical >NV0: open by process 115 >NV0: regs=0xd7b7a000 >NV0: regs=0xd8b7a000 >fb_physical >fb_physical >kmem_alloc: e0b7a000 >00010000 >kmem_alloc: e0b8a000 >00001000 >kmem_alloc: e0b8b000 >00008000 >00010000 >00001000 >00008000 >gandalf# > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-hardware" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D0F6FEC.20305>