Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 08 Mar 2002 07:18:03 -0800
From:      Rob <rob@pythonemproject.com>
To:        ElephantChild <baloo@gimpgirl.com>, freebsd-mobile@freebsd.org
Subject:   Re: Opinions requested: FreeBSD-stable and Sony Vaio FXA series
Message-ID:  <3C88D62B.273EEE3C@pythonemproject.com>
References:  <Pine.NEB.4.44.0203080517480.13898-100000@shell.sasquatch.com> <3C88D5D2.A718A09F@pythonemproject.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Oh, and I forgot, no APM, need ACPI.  Rob.

Rob wrote:
> 
> Hi,
> 
> I have what was the top-of-the-line FX-290 (1GHz P3, 30G HD, 15"
> screen).  It is dual boot Win2K and FBSD.  My only FBSD complaint is
> that I can only get VESA sized console, and then with special kernel
> params.  But other than that sound works very well.  I haven't tried the
> CD burner yet, but it is recognized by the OS.  I use the built in
> ethernet, and printing is no problem either.
> 
> My main complaint with this unit was that Sony bypassed Win2k and went
> right to Windows XP support.  So it took months to get all of the Win2k
> drivers and utilities.  Also, I use it for Python programming and found
> that Win2K runs Python 50% or more faster than FreeBSD :(
> 
> Rob.
> 
> ElephantChild wrote:
> >
> > I searched the -questions, -hardware, and -mobile archives and saw many
> > mentions of Vaios, some of them discouraging, most encouraging, but none
> > that mention that model specifically. (there's a semblance of specs at
> > http://www.sonystyle.com/vaio/fxaseries/specs.shtml.)
> >
> > I plan to use that one as a dual-boot 'doze+FreeBSD-stable machne, and I'd
> > like to hear about any stories, good or bad, that you may have about it or
> > its components. I saw that the graphics chipset seems to work under XF86
> > (on other Vaio models), and I suspect that the internal modem is a *spit*
> > winmodem and thus won't work, but it says nothing about the CPU and MB/bus
> > chipset. I also saw caveats about (lack of) ACPI support in -stable, and
> > about PCI interrupt vs. polling configuration traps, and about incomplete
> > support for the sorta-kinda fxp ethernet interface that other Vaios use
> > (and which may not be what this one uses - specs don't say.) OTOH, I saw
> > lots of (apparently successful) suggestions for daling w/ some of those on
> > other models.
> >
> > I'm prepared, if necessary, to show up at a dealer w/ FreeBSD boot CD in
> > hand and see what dmesg and the partition editor say, and or to ask
> > salescritters, but I thought I'd ask here first, as the answers will
> > probably be more helpful. Horror stories, pointers, clue stick
> > applications, or suggestions to ask on -questions or -hardware gratefully
> > accepted.
> >
> > Thanks in advance.
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-mobile" in the body of the message
> 
> --
> The Numeric Python EM Project
> 
> www.pythonemproject.com
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message

-- 
The Numeric Python EM Project

www.pythonemproject.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C88D62B.273EEE3C>