Date: Tue, 26 Jan 1999 14:44:13 -0600 From: Jon Hamilton <hamilton@pobox.com> To: freebsd-stable@FreeBSD.ORG Subject: calcru: negative time and PAM buildworld problem Message-ID: <19990126204413.4FE6C45CB4@pobox.com>
next in thread | raw e-mail | index | archive | help
This is a multipart MIME message. --==_Exmh_17934619030 Content-Type: text/plain; charset=us-ascii I am running 3.0-STABLE cvsupped and built from Saturday, Jan 23 on a K6-2/350 system, and have seen a couple of these during a make buildworld: calcru: negative time of -695349993 usec for pid 5950 (make) I've included my kernel config and dmesg output below. I've also been having problems with buildworld in libpam - make clean doesn't seem to get rid of some (all?) of the .a files, and buildworld trips over them next time it's run. The build goes fine if I manually remove the archive files first. I saw some mention of this on the mailing lists earlier, but never saw a reply stating what the problem was, and haven't seen any changes in CVS. The stuff that ``make clean'' doesn't remove is: lib/libpam/libpam/libpam.a lib/libpam/modules/pam_cleartext_pass_ok/libpam_cleartext_pass_ok.a lib/libpam/modules/pam_radius/libpam_radius.a lib/libpam/modules/pam_skey/libpam_skey.a lib/libpam/modules/pam_tacplus/libpam_tacplus.a lib/libpam/modules/pam_unix/libpam_unix.a file(1) reports that each of these are ``current ar archive random library''. When subsequent builds reach this point, I get: ld -o _pam_static_modules.o -r --whole-archive /usr/src/lib/libpam/libpam/../modules/pam_cleartext_pass_ok/libpam_cleartext_pass_ok.a /usr/src/lib/libpam/libpam/../modules/pam_radius/libpam_radius.a /usr/src/lib/libpam/libpam/../modules/pam_skey/libpam_skey.a /usr/src/lib/libpam/libpam/../modules/pam_tacplus/libpam_tacplus.a /usr/src/lib/libpam/libpam/../modules/pam_unix/libpam_unix.a /usr/src/lib/libpam/libpam/../modules/pam_cleartext_pass_ok/libpam_cleartext_pass_ok.a: object /usr/src/lib/libpam/libpam/../modules/pam_cleartext_pass_ok/libpam_cleartext_pass_ok.a(pam_cleartext_pass_ok.o) in archive is not object *** Error code 1 Stop. The version of /usr/src/lib/libpam/Makefile that I am using is: $FreeBSD: src/lib/libpam/Makefile,v 1.2 1999/01/20 21:55:21 jdp Exp $ --==_Exmh_17934619030 Content-Type: text/plain ; name="WOODSTOCK"; charset=us-ascii Content-Description: WOODSTOCK Content-Disposition: attachment; filename="WOODSTOCK" # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143 1999/01/11 03:18:31 yokota Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" # CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD options "CPU_WT_ALLOC" # NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY options "NO_F00F_HACK" ident WOODSTOCK maxusers 64 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SOFTUPDATES options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on da0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 #controller eisa0 controller pci0 controller pnp0 options IPFIREWALL controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller aic0 at isa? port 0x340 bio irq 11 controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 #device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 device lpt0 at isa? port? tty irq 7 # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ax0 #device de0 #device fxp0 #device mx0 #device pn0 #device rl0 #device tl0 #device tx0 #device vr0 #device vx0 #device wb0 #device xl0 device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter controller snd0 #device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 # USB support #controller uhci0 #controller ohci0 #controller usb0 # # for the moment we have to specify the priorities of the device # drivers explicitly by the ordering in the list below. This will # be changed in the future. # #device ums0 #device ukbd0 #device ulpt0 #device uhub0 #device ucom0 #device umodem0 #device hid0 #device ugen0 # #options USB_DEBUG #options USBVERBOSE --==_Exmh_17934619030 Content-Type: text/plain ; name="dmesg.out"; charset=us-ascii Content-Description: dmesg.out Content-Disposition: attachment; filename="dmesg.out" Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-STABLE #3: Sat Jan 23 23:30:10 CST 1999 hamilton@localhost:/usr/src/sys/compile/WOODSTOCK Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x580 Stepping=0 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67043328 (65472K bytes) config> quit avail memory = 62341120 (60880K bytes) Preloaded elf kernel "kernel" at 0xf02b7000. Probing for devices on PCI bus 0: chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0 chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0 chip2: <PCI to 0x80 bridge (vendor=10b9 device=7101)> rev 0x00 on pci0.3.0 chip3: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xc3 on pci0.7.0 bt0: <Buslogic Multi-Master SCSI Host Adapter> rev 0x08 int a irq 9 on pci0.10.0 bt0: BT-958 FW Rev. 5.06I Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs vga0: <S3 Trio graphics accelerator> rev 0x43 int a irq 9 on pci0.11.0 ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0xc1 int a irq 0 on pci0.15.0 Probing for devices on PCI bus 1: Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x10087508 Comp ID: PNP0600 [0x0006d041] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <WDC AC31200F> wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): <NEC CD-ROM DRIVE:285/3.04>, removable, dma, iordy acd0: drive speed 2067KB/sec, 128KB cache acd0: supported read types: CD-R, CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): <WDC AC2700H> wd2: 696MB (1427328 sectors), 1416 cyls, 16 heads, 63 S/T, 512 B/S bt: unit number (1) too high bt1 not found at 0x330 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa snd0: <SoundBlaster 16 4.13> sbxvi0 at drq 5 on isa snd0: <SoundBlaster 16 4.13> sbmidi0 not found at 0x330 IP packet filtering initialized, divert disabled, rule-based forwarding disabled, logging disabled Waiting 15 seconds for SCSI devices to settle sa0 at bt0 bus 0 target 3 lun 0 sa0: <HP HP35480A 9 09> Removable Sequential Access SCSI-2 device sa0: 3.300MB/s transfers da0 at bt0 bus 0 target 0 lun 0 da0: <SEAGATE ST34371N 0280> Fixed Direct Access SCSI-2 device da0: 3.300MB/s transfers, Tagged Queueing Enabled da0: 4148MB (8496960 512 byte sectors: 255H 63S/T 528C) calcru: negative time of -695349993 usec for pid 5950 (make) --==_Exmh_17934619030-- -- Jon Hamilton hamilton@pobox.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990126204413.4FE6C45CB4>