Date: Fri, 31 Jan 1997 20:34:12 +0100 (MET) From: Rob Simons <rob@xs1.simplex.nl> To: dwoods@netgazer.com, freebsd-isp@freebsd.org Subject: Re: Windows NT Problem - Off subject Message-ID: <199701311934.UAA29143@xs1.simplex.nl>
next in thread | raw e-mail | index | archive | help
| We are adding a customer via direct ISDN. We have a Livingston PM-2i, they | have an Ascend P50. We are able to get packets to and from the 2i and p50 | just fine. Problem is, they run token ring and a windows NT server. We | have installed an 10Base-T card in the server, and thought that we | configured routing correctly, but for some reason the server doesnt' want | to pass packets from the internal token-ring network to the p50 and then | out to us. Each card has its own IP address, TCP is loaded. The 10Base-T | card has the token ring card as the gateway and routing is turned on. The | computer knows about both interfaces and seems to be happy with both of | them. | The 10Base-T card has the token ring card as the gateway and routing is | turned on. 'routing' means ip-forwarding between the interfaces here ? As I read it here you have the token ring card as default gateway for the 10Base-T card? It's supposed to be the other way around. On the client it should read the server's token ring card ip-address as gateway, and on the server it should read the Ascend's ip as default gateway. If thee Ascend's ip is in the same range as the 10Base-T card it will find it no problem. If this won't solve your problem you should make a small drawing of your configuration, and write the ip addresses and netmasks for each interface. - Rob. /*--------------------------------------------------------------*\ /* Rob Simons | rob@simplex.nl *\ /* ------------ | ------------- | -------- | ------- *\ /* Novell Netware System Operator | UNIX system operator *\ /*--------------------------------------------------------------*\
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199701311934.UAA29143>