Date: Sun, 30 Apr 2006 18:45:34 +0200 From: Raoul MEGELAS <rmgls@wanadoo.fr> To: freebsd-current@freebsd.org Subject: Re: iwi driver Message-ID: <20060430164536.975AF1C00262@mwinf0406.wanadoo.fr>
next in thread | raw e-mail | index | archive | help
On Sun, Apr 30, 2006 at 05:04:57PM +0200, Fabian Keil wrote: > rmgls@wanadoo.fr wrote: > > > since the last update dated > > Sat Apr 29, (on current), > > the iwi driver does not work: > > cannot change any achannel, and no association! > > the old version of the driver works. > > > > ... > > ;* Copyright Sam Leffler */ > > > > previous: > > /* $FreeBSD: src/sys/dev/iwi/if_iwi.c,v 1.27 2006/01/29 12:03:03 damien Exp $ */ > > > > the nic is seated onboard of a s5 Sony laptop. > > dmesg: > > ... > > firmware_get: failed to load firmware image iwi_bss > > iwi0: could not load firmware > > > > ... > > > > firmware_get: failed to load firmware image iwi_bss > > iwi0: could not load firmware > > I'm using iwiNG with FreeBSD 6.1-RC and it has the same > problem (with ether as well) if iwi0 is already running > and the firmware loaded. > > Most of the time a few ifconfig iwi0 down/up runs get it > working again. Sometimes I have to reload the modules. > > If all iwi0 settings are done with only one ifconfig call, > I don't see any problems. > > Fabian > -- > http://www.fabiankeil.de/ Hi Fabian, thanks for your reply,. But even with numerous down/up, ifconfig on one line, the channel is always 1, and does not associate. Best Regards. raoul rmgls@wanadoo.fr
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060430164536.975AF1C00262>