Date: Fri, 10 Feb 2012 02:18:38 -0600 From: "Sam Fourman Jr." <sfourman@gmail.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: USB3 and a Seagate FA GoFlex Message-ID: <CAOFF%2BZ2jPVXLAL8rqgdkk7=DtnCpYOJqWLkOc-LmdD6yh1XE-w@mail.gmail.com> In-Reply-To: <201202100908.24184.hselasky@c2i.net> References: <CAOFF%2BZ0G_1jHpoxo7hTZLmO%2BM63uKG5KADSWobfvu3d57V4sMQ@mail.gmail.com> <201202100240.30401.hselasky@c2i.net> <CAOFF%2BZ2Lz%2BFnwbR-yiSOZUUzKDuMK-Yd6wEtrUwpUoBVmZgQ_A@mail.gmail.com> <201202100908.24184.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 10, 2012 at 2:08 AM, Hans Petter Selasky <hselasky@c2i.net>wrote: > On Friday 10 February 2012 07:53:16 Sam Fourman Jr. wrote: > > UQ_MSC > > Try to add some of the quirks like this: > > usbconfig -d X.Y add_quirk UQ_MSC_XXX > > UQ_MSC_NO_INQUIRY > UQ_MSC_NO_SYNC_CACHE > > Then replug your device. > > Icarus# usbconfig ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <XHCI root HUB 0x1b73> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.3: <product 0x3304 vendor 0x13d3> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.4: <USB2.0 UVC 2M WebCam USB2.0 UVC 2M WebCam> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen1.2: <FA GoFlex Desk Seagate> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON Icarus# usbconfig -d 1.2 add_quirk UQ_MSC_NO_INQUIRY Icarus# usbconfig -d 1.2 add_quirk UQ_MSC_NO_SYNC_CACHE ugen1.2: <Seagate> at usbus1 (disconnected) umass0: at uhub1, port 1, addr 1 (disconnected) (pass2:umass-sim0:0:0:0): lost device (pass2:umass-sim0:0:0:0): removing device entry (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs (da0:umass-sim0:0:0:0): removing device entry ugen1.2: <Seagate> at usbus1 umass0: <Seagate FA GoFlex Desk, class 0/0, rev 3.00/1.00, addr 2> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4400 umass0:3:0:-1: Attached to scbus3 (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0 pass2: < > Removable Direct Access SCSI-2 device pass2: 400.000MB/s transfers GEOM: new disk da0 (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready) (da0:umass-sim0:0:0:0): Polling device for readiness da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: < > Removable Direct Access SCSI-2 device da0: 400.000MB/s transfers da0: 1907729MB (3907029167 512 byte sectors: 255H 63S/T 243201C) (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): AutoSense failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR (da0:umass-sim0:0:0:0): Retrying command (da0:umass-sim0:0:0:0): AutoSense failed (da0:umass-sim0:0:0:0): Error 5, Unretryable error --HPS > -- Sam Fourman Jr. Fourman Networks http://www.fourmannetworks.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOFF%2BZ2jPVXLAL8rqgdkk7=DtnCpYOJqWLkOc-LmdD6yh1XE-w>