Date: Sun, 16 Feb 2003 03:23:04 -0300 From: Conrado Vardanega <cvarda.freebsd@brturbo.com> To: freebsd-questions@freebsd.org Subject: System stops responding on boot when detecting VIA V82C686B (KT-133A) Message-ID: <20030216032304.65095a9a.cvarda.freebsd@brturbo.com>
next in thread | raw e-mail | index | archive | help
When booting on an ASUS A7V133 (with KT-133A chipset, chip V82C686B), system hangs during boot most times. A few times system doesn't hangs. The controller usually hangs when showing these messages: ...do /kernel: ad4: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata2-master UDMA100 Feb 16 01:36:31 conrado /kernel: ad6: 38172MB <QUANTUM FIREBALLlct20 40> [77557/16/63] at ata3-master UDMA100 Feb 16 01:36:31 conrado /kernel: acd0: REQUEST_SENSE command timeout - resetting Feb 16 01:36:31 conrado /kernel: ata0: resetting devices .. done Feb 16 01:36:31 conrado /kernel: acd0: read data overrun 18/0 Feb 16 01:36:31 conrado /kernel: acd0: REQUEST_SENSE command timeout - resetting Feb 16 01:36:31 conrado /kernel: ata0: resetting devices .. done Feb 16 01:36:31 conrado /kernel: acd0: read data overrun 18/0 Feb 16 01:36:31 conrado /kernel: acd0: REQUEST_SENSE command timeout - resetting Feb 16 01:36:31 conrado /kernel: ata0: resetting devices .. done Feb 16 01:36:31 conrado /kernel: acd0: read data overrun 18/0 Feb 16 01:36:31 conrado /kernel: acd0: REQUEST_SENSE command timeout - resetting Feb 16 01:36:31 conrado /kernel: ata0: resetting devices .. done Feb 16 01:36:31 conrado /kernel: acd0: MODE_SENSE_BIG command timeout - resetting Feb 16 01:36:31 conrado /kernel: ata0: resetting devices .. done Feb 16 01:36:31 conrado /kernel: acd0: read data overrun 4/0 Feb 16 01:36:31 conrado last message repeated 5 times Feb 16 01:36:31 conrado /kernel: acd0: read data overrun 2/0 Feb 16 01:36:31 conrado /kernel: acd0: CD-RW <Hewlett-Packard CD-Writer Plus 8100> at ata0-master PIO3 If no devices are attached to the on-board, chipset build-in ATA controller, system hangs EXACTLY when the controller is detected: ==> atapci0: <VIA 82C686 ATA100 controller> at device 4.1 on pci0 DISABLING the VIA ATA-100 controller on BIOS SETUP, the system boots up normally. The machine is a 900-MHz Athlon, on a ASUS A7V133, one HP CD-RW attached to the primary master (VIA ATA controller) and two hard-discs attached to the on-board PROMISE controller. OS is FreeBSD 4.7 (RELEASE), but happens to 5.0, 4.6.2, 4.6, 4.5, and earlier (from 4.x line). Any hints? --- Conrado Vardanega cvarda.freebsd@brturbo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030216032304.65095a9a.cvarda.freebsd>