Date: Sat, 17 Jun 1995 13:22:19 -0700 (PDT) From: brian@MediaCity.com (Brian Litzinger) To: freebsd-questions@freebsd.org Subject: problems with WIDE drive Message-ID: <m0sN4Nn-000re2C@easynet.com>
next in thread | raw e-mail | index | archive | help
I've been using an adaptec 2940W for sometime with narrow drives and it
has worked flawlessly.
I've hooked up an
ahc0: target 1 using 16Bit transfers
ahc0: target 1 synchronous at 10.0MB/s, offset = 0x8
(ahc0:1:0): "CONNER CP31050 1.05GB 160D" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 1013MB (2074880 512 byte sectors)
which works pretty well, but every once in a while I get a slew of:
ahc0: Target Busy
ahc0: Target Busy
...
and an I/O error message from pax or whatever I am using to do the transfers,
for example:
brian@apt>pax -rw Mosaic-src-2.6b2 /usx/home/brian/src
pax: Access/modification time set failed on: /usx/home/brian/src/Mosaic-src-2.6b
2/src/Mosaic-2.6b2-static.gz <Input/output error>
And some of the data is messed up.
Any ideas what is going wrong?
I'm running
FreeBSD 2.0-BUILT-19950601
P5-90
16MB/512K Cache
2940W (terminator off)
Wide chain
CONNER CP31050 1.05GB 160D (terminated)
Narrow chain
DEC RZ73 (C) DEC T392
TEAC CD-ROM CD-50 1.06 (at end and terminated)
WANGTEK 6130-FS 3.04
Digital DC21040 Ethernet
Matrox PCI VGA
Lastly, I've tried two different Conners and both experince the same
problem.
Thanks in advance for any help,
Brian Litzinger
brian@easynet.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0sN4Nn-000re2C>