Date: Tue, 29 May 2012 04:32:27 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org Subject: svn commit: r236217 - stable/8/sys/dev/bce Message-ID: <201205290432.q4T4WR85052571@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: yongari Date: Tue May 29 04:32:27 2012 New Revision: 236217 URL: http://svn.freebsd.org/changeset/base/236217 Log: MFC r235816: Make IPMI work in the bce driver even when the interface is configured down. Formerly, IPMI communication was lost whenever the interface was not up. The reason was that the BCE_EMAC_MODE register was not configured with the correct media settings. There are two parts to the fix. First, resetting the chip in bce_reset() causes the BCE_EMAC_MODE register to be initialized to a default value that does not necessarily correspond to the actual media settings. The fix implemented here is a bit of a hack. Ideally, at the end of bce_reset() we would poll the PHY to determine the negotiated media, and then we would set the BCE_EMAC_MODE register accordingly. That is difficult, since the PHY is abstracted behind the MII layer and is not supposed to be queried directly from the MAC driver. Instead, we read the BCE_EMAC_MODE register at the beginning of bce_reset() and then restore its media bits to their original values before returning. If IPMI is up and running, then the link is already established and the BCE_EMAC_MODE register is already set appropriately when bce_reset() is called. If IPMI is not running, no harm is done by preserving the BCE_EMAC_MODE settings. The driver will set the register properly once the interface is configured up and link is established. Second, bce_miibus_statchg() is sometimes called when the link is down. In that case, the reported media settings are invalid. Formerly, the driver used them anyway to setup the BCE_EMAC_MODE register. We now avoid changing any MAC registers unless link is active and the reported media settings are valid. Submitted by: jdp Tested by: jdp Modified: stable/8/sys/dev/bce/if_bce.c Directory Properties: stable/8/sys/ (props changed) stable/8/sys/amd64/include/xen/ (props changed) stable/8/sys/boot/ (props changed) stable/8/sys/cddl/contrib/opensolaris/ (props changed) stable/8/sys/contrib/dev/acpica/ (props changed) stable/8/sys/contrib/pf/ (props changed) stable/8/sys/dev/e1000/ (props changed) Modified: stable/8/sys/dev/bce/if_bce.c ============================================================================== --- stable/8/sys/dev/bce/if_bce.c Tue May 29 04:30:02 2012 (r236216) +++ stable/8/sys/dev/bce/if_bce.c Tue May 29 04:32:27 2012 (r236217) @@ -2062,6 +2062,11 @@ bce_miibus_statchg(device_t dev) media_status = mii->mii_media_status; } + /* Ignore invalid media status. */ + if ((media_status & (IFM_ACTIVE | IFM_AVALID)) != + (IFM_ACTIVE | IFM_AVALID)) + goto bce_miibus_statchg_exit; + val = REG_RD(sc, BCE_EMAC_MODE); val &= ~(BCE_EMAC_MODE_PORT | BCE_EMAC_MODE_HALF_DUPLEX | BCE_EMAC_MODE_MAC_LOOP | BCE_EMAC_MODE_FORCE_LINK | @@ -2131,6 +2136,7 @@ bce_miibus_statchg(device_t dev) /* ToDo: Update watermarks in bce_init_rx_context(). */ +bce_miibus_statchg_exit: DBEXIT(BCE_VERBOSE_PHY); } @@ -4997,14 +5003,25 @@ bce_stop(struct bce_softc *sc) static int bce_reset(struct bce_softc *sc, u32 reset_code) { - u32 val; + u32 emac_mode_save, val; int i, rc = 0; + static const u32 emac_mode_mask = BCE_EMAC_MODE_PORT | + BCE_EMAC_MODE_HALF_DUPLEX | BCE_EMAC_MODE_25G; DBENTER(BCE_VERBOSE_RESET); DBPRINT(sc, BCE_VERBOSE_RESET, "%s(): reset_code = 0x%08X\n", __FUNCTION__, reset_code); + /* + * If ASF/IPMI is operational, then the EMAC Mode register already + * contains appropriate values for the link settings that have + * been auto-negotiated. Resetting the chip will clobber those + * values. Save the important bits so we can restore them after + * the reset. + */ + emac_mode_save = REG_RD(sc, BCE_EMAC_MODE) & emac_mode_mask; + /* Wait for pending PCI transactions to complete. */ REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS, BCE_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE | @@ -5094,6 +5111,11 @@ bce_reset(struct bce_softc *sc, u32 rese bce_fw_cap_init(sc); bce_reset_exit: + /* Restore EMAC Mode bits needed to keep ASF/IPMI running. */ + val = REG_RD(sc, BCE_EMAC_MODE); + val = (val & ~emac_mode_mask) | emac_mode_save; + REG_WR(sc, BCE_EMAC_MODE, val); + DBEXIT(BCE_VERBOSE_RESET); return (rc); }
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201205290432.q4T4WR85052571>