Date: Fri, 27 Mar 2026 22:48:00 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: glebius@FreeBSD.org, pouria@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #28122 - Failure Message-ID: <1006068820.1633.1774651680773@jenkins.ci.freebsd.org>
index | next in thread | raw e-mail
FreeBSD-main-amd64-test - Build #28122 (254b23eb1f540844cf2a90f2781ae4231c5701ce) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28122/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28122/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28122/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 6cf1afeccd8aaf926c58c5f0ee24ca3d2329a0ce by glebius: newsyslog: check for rename failure during log rotation 2371b24c22f063ef79dc1935419c9854656e265e by pouria: tests: Add grand link-layer event in netinet6/ndp 254b23eb1f540844cf2a90f2781ae4231c5701ce by pouria: routing: Retire ROUTE_MPATH compile option The end of the build log: [...truncated 4.38 MiB...] passed [0.568s] sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_add_route4_ll_if_gw -> epair0a: Ethernet address: 58:9c:fc:10:02:ac epair0b: Ethernet address: 58:9c:fc:10:56:89 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.614s] sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_add_route6_ll_gw -> epair0a: Ethernet address: 58:9c:fc:10:02:ac epair0b: Ethernet address: 58:9c:fc:10:56:89 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.576s] sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_add_route6_ll_if_gw -> epair0a: Ethernet address: 58:9c:fc:10:02:ac epair0b: Ethernet address: 58:9c:fc:10:56:89 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.589s] sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_buffer_override -> epair0a: Ethernet address: 58:9c:fc:10:02:ac epair0b: Ethernet address: 58:9c:fc:10:56:89 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.645s] sys/netlink/test_snl:snl_list_ifaces -> passed [0.006s] sys/netlink/test_snl:snl_parse_errmsg_capped -> passed [0.005s] sys/netlink/test_snl:snl_parse_errmsg_capped_extack -> passed [0.006s] sys/netlink/test_snl:snl_parse_errmsg_uncapped_extack -> passed [0.005s] sys/netlink/test_snl:snl_verify_core_parsers -> passed [0.005s] sys/netlink/test_snl:snl_verify_route_parsers -> passed [0.005s] sys/netlink/test_snl_generic:snl_verify_genl_parsers -> passed [0.005s] sys/netlink/test_snl_generic:test_snl_get_genl_family_failure -> passed [0.005s] sys/netlink/test_snl_generic:test_snl_get_genl_family_groups -> passed [0.005s] sys/netlink/test_snl_generic:test_snl_get_genl_family_success -> passed [0.006s] sys/netpfil/common/dummynet:ipfw_codel -> epair0a: Ethernet address: 9a:1a:fc:03:cf:e6 epair0b: Ethernet address: 5e:32:28:0a:aa:43 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [0.423s] sys/netpfil/common/dummynet:ipfw_interface_removal -> epair0a: Ethernet address: ae:db:f6:ab:e5:f3 epair0b: Ethernet address: 96:7b:52:c0:f4:60 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [7.433s] sys/netpfil/common/dummynet:ipfw_pipe -> epair0a: Ethernet address: da:5b:c3:37:84:6d epair0b: Ethernet address: c2:5b:ba:3e:0f:73 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [27.581s] sys/netpfil/common/dummynet:ipfw_pipe_v6 -> epair0a: Ethernet address: 72:6d:ba:34:04:99 epair0b: Ethernet address: 42:0d:26:3f:ba:34 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [23.102s] sys/netpfil/common/dummynet:ipfw_pls_basic -> epair0a: Ethernet address: 12:52:75:05:0f:b5 epair0b: Ethernet address: 0e:19:c3:2f:cc:b7 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [12.803s] sys/netpfil/common/dummynet:ipfw_pls_gilbert -> epair0a: Ethernet address: 42:70:a1:f1:ea:1f epair0b: Ethernet address: c6:09:0e:f0:52:53 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [14.872s] sys/netpfil/common/dummynet:ipfw_queue -> epair0a: Ethernet address: 3a:bb:d9:63:8d:96 epair0b: Ethernet address: 16:1f:df:4b:24:63 epair0a: link state changed to UP epair0b: link state changed to UP Limiting icmp ping response from 229 to 192 packets/sec Limiting icmp ping response from 279 to 215 packets/sec Limiting icmp ping response from 258 to 208 packets/sec Limiting icmp ping response from 273 to 207 packets/sec Limiting icmp ping response from 301 to 197 packets/sec Limiting icmp ping response from 275 to 200 packets/sec Limiting icmp ping response from 246 to 188 packets/sec Limiting icmp ping response from 259 to 191 packets/sec Limiting icmp ping response from 251 to 185 packets/sec Limiting icmp ping response from 273 to 212 packets/sec Limiting icmp ping response from 276 to 214 packets/sec Limiting icmp ping response from 270 to 208 packets/sec Limiting icmp ping response from 282 to 215 packets/sec Limiting icmp ping response from 256 to 198 packets/sec Limiting icmp ping response from 266 to 199 packets/sec Limiting icmp ping response from 235 to 187 packets/sec Limiting icmp ping response from 268 to 206 packets/sec Limiting icmp ping response from 247 to 184 packets/sec Limiting icmp ping response from 271 to 204 packets/sec Limiting icmp ping response from 247 to 186 packets/sec Limiting icmp ping response from 255 to 185 packets/sec Limiting icmp ping response from 276 to 216 packets/sec Limiting icmp ping response from 271 to 203 packets/sec Limiting icmp ping response from 272 to 210 packets/sec Limiting icmp ping response from 270 to 203 packets/sec Limiting icmp ping response from 274 to 211 packets/sec Limiting icmp ping response from 280 to 213 packets/sec Limiting icmp ping response from 253 to 192 packets/sec Limiting icmp ping response from 261 to 193 packets/sec Limiting icmp ping response from 264 to 208 packets/sec Limiting icmp ping response from 250 to 184 packets/sec Limiting icmp ping response from 253 to 187 packets/sec Limiting icmp ping response from 255 to 186 packets/sec Limiting icmp ping response from 272 to 211 packets/sec Limiting icmp ping response from 257 to 191 packets/sec Limiting icmp ping response from 254 to 198 packets/sec Limiting icmp ping response from 260 to 196 packets/sec epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [29.536s] sys/netpfil/common/dummynet:ipfw_queue_v6 -> epair0a: Ethernet address: 02:9f:b2:ca:95:32 epair0b: Ethernet address: a6:19:15:3c:64:b5 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [23.392s] sys/netpfil/common/dummynet:pf_codel -> epair0a: Ethernet address: 2a:07:bd:e0:17:59 epair0b: Ethernet address: e6:5b:90:1b:8a:50 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [0.450s] sys/netpfil/common/dummynet:pf_interface_removal -> epair0a: Ethernet address: 6a:5b:93:43:a8:bc epair0b: Ethernet address: de:5f:19:f6:95:8b epair0a: link state changed to UP epair0b: link state changed to UP Fatal trap 9: general protection fault while in kernel mode cpuid = 1; apic id = 01 instruction pointer = 0x20:0xffffffff80e2bc83 stack pointer = 0x28:0xfffffe008bc5d9c0 frame pointer = 0x28:0xfffffe008bc5db90 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2 (clock (0)) rdi: fffffe008bc5d928 rsi: fffff800a940a800 rdx: 0000000000000001 rcx: 0000000000000000 r8: ffffffffffffffff r9: ffffffff82272d78 rax: deadc0dedeadc0de rbx: 0000000000000000 rbp: fffffe008bc5db90 r10: 0000000000000000 r11: 0000000000000000 r12: 0000000000000000 r13: fffff801a21c4d70 r14: fffff801263daa80 r15: fffff800a940a800 trap number = 9 panic: general protection fault cpuid = 1 time = 1774651668 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008bc5d740 vpanic() at vpanic+0x136/frame 0xfffffe008bc5d870 panic() at panic+0x43/frame 0xfffffe008bc5d8d0 trap_fatal() at trap_fatal+0x68/frame 0xfffffe008bc5d8f0 calltrap() at calltrap+0x8/frame 0xfffffe008bc5d8f0 --- trap 0x9, rip = 0xffffffff80e2bc83, rsp = 0xfffffe008bc5d9c0, rbp = 0xfffffe008bc5db90 --- ip6_output() at ip6_output+0xb93/frame 0xfffffe008bc5db90 tcp_default_output() at tcp_default_output+0x2127/frame 0xfffffe008bc5dd70 tcp_timer_rexmt() at tcp_timer_rexmt+0x6e9/frame 0xfffffe008bc5ddd0 tcp_timer_enter() at tcp_timer_enter+0x13d/frame 0xfffffe008bc5de10 softclock_call_cc() at softclock_call_cc+0x19b/frame 0xfffffe008bc5dec0 softclock_thread() at softclock_thread+0xc6/frame 0xfffffe008bc5def0 fork_exit() at fork_exit+0x82/frame 0xfffffe008bc5df30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008bc5df30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 2 tid 100031 ] Stopped at kdb_enter+0x33: movq $0,0x15e64c2(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 1 dynamic pcpu = 0xfffffe008d3bdd40 curthread = 0xfffff80102422780: pid 2 tid 100031 critnest 1 "clock (0)" curpcb = 0xfffff80102422cd0 fpcurthread = none idlethread = 0xfffff8010240c000: tid 100004 "idle: cpu1" self = 0xffffffff82a11000 curpmap = 0xffffffff81da1d00 tssp = 0xffffffff82a11384 rsp0 = 0xfffffe008bc5e000 kcr3 = 0x8000000002945003 ucr3 = 0xffffffffffffffff scr3 = 0x146d7ceae gs32p = 0xffffffff82a11404 ldt = 0xffffffff82a11444 tss = 0xffffffff82a11434 curvnet = 0xfffff80003576900 spin locks held: db:0:kdb.enter.panic> reset Uptime: 55m56s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-28122' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./run.sh x ./run-kyua.sh x ./disable-dtrace-tests.sh x ./disable-notyet-tests.sh x ./auto-shutdown x ./disable-zfs-tests.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins8081571347712136496.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '254b23eb1f540844cf2a90f2781ae4231c5701ce', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../254b23eb1f540844cf2a90f2781ae4231c5701ce/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1006068820.1633.1774651680773>