Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 31 Aug 2004 22:31:21 +1000
From:      Rob B <rbyrnes@mailshack.com>
To:        alpha@freebsd.org
Subject:   Re: FreeBSD 5.3-BETA2 boots OK on PC64
Message-ID:  <6.1.2.0.2.20040831223007.0244a758@mail.nerdshack.com>
In-Reply-To: <6.1.2.0.2.20040831222605.024ccc28@127.0.0.1>
References:  <6.1.2.0.2.20040831222605.024ccc28@127.0.0.1>

next in thread | previous in thread | raw e-mail | index | archive | help
At 10:28 PM 31/08/2004, Rob B wrote:
>I have 5.3-BETA2 booting and running fine on PC64 (Cabriolet) with a 
>Matrox Millennium video card

I should also mention that due to bandwidth limitations, this was a source 
upgrade from 5.2.1

Rob
(Replying to myself ... *tsk*)

>loop@aylee ~ % uname -a
>FreeBSD aylee.number6 5.3-BETA2 FreeBSD 5.3-BETA2 #0: Tue Aug 31 15:56:36 
>EST 2004     root@aylee.number6:/usr/obj/usr/src/sys/AYLEE  alpha
>
>Copyright (c) 1992-2004 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
>FreeBSD 5.3-BETA2 #0: Tue Aug 31 15:56:36 EST 2004
>     root@aylee.number6:/usr/obj/usr/src/sys/AYLEE
>EB64+
>Digital AlphaPC 64 274 MHz, 274MHz
>8192 byte page size, 1 processor.
>CPU: EV45 (21064A) major=6 minor=2
>OSF PAL rev: 0x100040002012d
>real memory  = 132128768 (126 MB)
>avail memory = 120668160 (115 MB)
>apecs0: <DECchip 21072 Core Logic chipset>
>pcib0: <2107x PCI host bus adapter> on apecs0
>pci0: <PCI bus> on pcib0
>sym0: <875> port 0x10100-0x101ff mem 
>0x8206d000-0x8206dfff,0x8206e000-0x8206e0ff irq 2 at device 5.0 on pci0
>sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
>sym0: interrupting at APECS irq 2
>sym0: [GIANT-LOCKED]
>nge0: <National Semiconductor Gigabit Ethernet> port 0x10000-0x100ff mem 
>0x8206c
>000-0x8206cfff irq 0 at device 6.0 on pci0
>nge0: interrupting at APECS irq 0
>nge0: [GIANT-LOCKED]
>miibus0: <MII bus> on nge0
>nsgphy0: <DP83861 10/100/1000 media interface> on miibus0
>nsgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
>1000baseT-FDX, auto
>nge0: Ethernet address: 00:40:f4:29:51:ef
>pci0: <display, VGA> at device 7.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 8.0 on pci0
>isa0: <ISA bus> on isab0
>dc0: <Intel 21143 10/100BaseTX> port 0x10200-0x1027f mem 
>0x8206e100-0x8206e17f irq 3 at device 9.0 on pci0
>miibus1: <MII bus> on dc0
>dcphy0: <Intel 21143 NWAY media interface> on miibus1
>dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc0: Ethernet address: 08:00:2b:c3:dd:56
>dc0: interrupting at APECS irq 3
>dc0: [GIANT-LOCKED]
>ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
>ata0: interrupting at ISA irq 14
>ata1 at port 0x376,0x170-0x177 irq 15 on isa0
>ata1: interrupting at ISA irq 15
>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd0: interrupting at ISA irq 1
>atkbd0: [GIANT-LOCKED]
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 
>0x3f7,0x3f
>0-0x3f5 irq 6 drq 2 on isa0
>fdc0: interrupting at ISA irq 6
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
>ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>lpt0: <Printer> on ppbus0
>lpt0: Polled port
>ppi0: <Parallel I/O> on ppbus0
>ppc0: interrupting at ISA irq 7
>sc0: <System console> on isa0
>sc0: VGA <16 virtual consoles, flags=0x200>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio0: interrupting at ISA irq 4
>sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
>sio1: type 16550A
>sio1: interrupting at ISA irq 3
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Timecounter "alpha" frequency 275000000 Hz quality 0
>Timecounters tick every 0.976 msec
>Waiting 5 seconds for SCSI devices to settle
>da0 at sym0 bus 0 target 0 lun 0
>da0: <COMPAQ BD00421936 3B00> Fixed Direct Access SCSI-2 device
>da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing 
>Enabled
>da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
>Mounting root from ufs:/dev/da0a



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.1.2.0.2.20040831223007.0244a758>