Date: Sun, 30 Nov 2008 03:18:41 +0000 From: "Andrew Tulloch" <andrew@flarn.com> To: freebsd-net@freebsd.org Subject: re0: Unknown H/W revision: 0x28000000 device_attach: re0 attach returned 6 Message-ID: <54854a7a0811291918s7affc753k998607f2529e7c2e@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I've just installed from the FreeBSD 7.1-BETA1 iso and get the
following when the re driver attempts to attach to the two onboard
NICs found on a Gigabyte GA-EX58-UD5 motherboard:
re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0x9e00-0x9eff mem
0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 16 at device 0.0 on
pci8
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
re0: Unknown H/W revision: 0x28000000
device_attach: re0 attach returned 6
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib9
re1: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0x8e00-0x8eff mem
0xfd1ff000-0xfd1fffff,0xfd1f8000-0xfd1fbfff irq 17 at device 0.0 on
pci9
re1: Chip rev. 0x28000000
re1: MAC rev. 0x00100000
re1: Unknown H/W revision: 0x28000000
device_attach: re1 attach returned 6
pciconf -lvc extract:
re0@pci0:8:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 0
cap 11[ac] = MSI-X supports 4 messages in map 0x20
cap 03[cc] = VPD
re1@pci0:9:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 0
cap 11[ac] = MSI-X supports 4 messages in map 0x20
cap 03[cc] = VPD
Is there any simple patch I can apply to get the driver to attach,
assuming it should work?
Thanks,
Andrew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54854a7a0811291918s7affc753k998607f2529e7c2e>