Date: Mon, 28 May 2001 00:44:33 +0200 (CEST) From: Jonas Sanamon <sanamon@kortis.com> To: freebsd-alpha@freebsd.org Subject: Interrupt problems with Multia and 2nd NIC Message-ID: <Pine.LNX.3.96.1010528004255.24505B-100000@santa.kortis.com>
next in thread | raw e-mail | index | archive | help
Hi! I'm trying to set up a 2nd NIC in my multia, as to make it a firewall. But for all the NICs i've tried the same thing happen; it detects the built-in DE21040 NIC, as well as NIC #2 but fails for NIC #2 with the error "could not map interrupt" From dmesg: ------------------------------------ FreeBSD 4.3-RELEASE #0: Sun Apr 22 01:05:25 GMT 2001 root@jkh101.osd.bsdi.com:/usr/src/sys/compile/GENERIC DEC AXPpci (PCI ISA), 167MHz 8192 byte page size, 1 processor. CPU: LCA Family major=4 minor=2 OSF PAL rev: 0x1000000020123 real memory = 81461248 (79552K bytes) avail memory = 72450048 (70752K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000772000. md0: Malloc disk dec_axppci_33_intr_map: bad interrupt pin 255 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 0.0 pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 1.0 pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 2.0 pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 3.0 pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 4.0 pci0: <unknown card> (vendor=0x0003, dev=0x0000) at 5.0 sym0: <810> port 0x10000-0x100ff mem 0x81000000-0x810000ff irq 11 at device 6.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: interrupting at ISA irq 11 isab0: <Intel 82378ZB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 de0: <Digital 21040 Ethernet> port 0x10180-0x101ff mem 0x81000180-0x810001ff irq 15 at device 8.0 on pci0 de0: interrupting at ISA irq 15 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 08:00:2b:e4:dd:0d pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 9.0 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 10.0 pci0: <unknown card> (vendor=0x1011, dev=0x0004) at 11.0 irq 10 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x10100-0x1017f mem 0x81000100-0x81 00017f irq 15 at device 12.0 on pci0 xl0: couldn't map interrupt device_probe_and_attach: xl0 attach returned 6 ---------------------------------- The same thing has happened with a Dlink DE530-TX (via-rhine) and Kingston (rtl8139) I've searched the web and the mailing list archives, but haven't been able to find anything to help me with this problem. Any ideas ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.96.1010528004255.24505B-100000>