Date: Wed, 30 Oct 2013 10:31:09 +0100 From: Arnaud Houdelette <arnaud.houdelette@tzim.net> To: freebsd-stable@freebsd.org Subject: Re: Continuous timeout messages from 10.0 alpha4 Message-ID: <5270D1DD.9060701@tzim.net> In-Reply-To: <5252B2EB.9010603@ShaneWare.Biz> References: <5252B2EB.9010603@ShaneWare.Biz>
next in thread | previous in thread | raw e-mail | index | archive | help
Might be unrelated, but I just installed 10-BETA2, and got similar timeout messages... Turns out that smartmontools was compiled with wrong kernel headers... Maybe you've got a similar tool which need rebuilding ? Arnaud On 07/10/2013 15:11, Shane Ambler wrote: > This is a regression between alpha2 and alpha4. I first setup a disk to > boot 10 just after alpha2 was tagged. A few days ago I updated to > alpha4 and started getting timeout messages, I have just built alpha5 > r256098 and still get them. > > I just had 10 running for a few hours and 3 of the messages log archives > which syslog rotates each hour due to size contain 3370 2508 and 3162 > timeout messages over 3 hours uptime. > > each entry is similar to -- > Oct 7 19:00:02 leader kernel: ahcich1: Timeout on slot 15 port 0 > Oct 7 19:00:02 leader kernel: ahcich1: is 40000001 cs 00008000 ss > 00000000 rs 00008000 tfd 2451 serr 00000000 cmd 00004f17 > > With slot x cycling from 0-31 but not always in sequence. > > MB is ASUS P8H61M LE/USB3 - corei5 - 8MB - nvidia GT520 > > ahci0: <Intel Cougar Point AHCI SATA controller> port > 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f > mem 0xfb305000-0xfb3057ff irq 20 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported > > With the following connected to ahcich1 (LG blu-ray burner) > cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 > cd0: <HL-DT-ST BD-RE BH12LS38 1.00> Removable CD-ROM SCSI-0 device > > > > Most relevant dmesg info would be (full dmesg/logs available) -- > > ahci0: <Intel Cougar Point AHCI SATA controller> port > 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f > mem 0xfb305000-0xfb3057ff irq 20 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > ahciem0: <AHCI enclosure management bridge> on ahci0 > > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) > ada0: quirks=0x1<4K> > ada0: Previously was known as ad4 > ada1 at ahcich4 bus 0 scbus2 target 0 lun 0 > ada1: <WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) > ada1: quirks=0x1<4K> > ada1: Previously was known as ad8 > ada2 at ahcich5 bus 0 scbus3 target 0 lun 0 > ada2: <eSATA-2 WD800JD-23JNA1 06.01C06> ATA-6 SATA 2.x device > ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes) > ada2: 76324MB (156312576 512 byte sectors: 16H 63S/T 16383C) > ada2: Previously was known as ad10 > ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 > ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > ses0: SEMB SES Device > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5270D1DD.9060701>