Date: Sat, 19 Mar 2005 21:42:41 +0300 From: Roman Kurakin <rik@cronyx.ru> To: John Mok <jmok@attglobal.net> Cc: freebsd-net@freebsd.org Subject: Re: HOWTO connect MCI using Netgraph + Frame Relay with Digi SYNC/570i Message-ID: <423C72A1.7060000@cronyx.ru> In-Reply-To: <42344AF7.6070701@attglobal.net> References: <42344AF7.6070701@attglobal.net>
next in thread | previous in thread | raw e-mail | index | archive | help
In case you still need this information. John Mok: > Hi, > > I would like to replace the existing Cisco router 1600 and connect to > MCI Hong Kong with FeeBSD 5.3 box with a Digi SYNC 570 serial card. > With reference of the FreeBSD handbook and the information from Julian > Elischer at > > http://www.elischer.org/netgraph/ > > I have compiled the kernel with the following options :- > > .... > options NETGRAPH > options NETGRAPH_FRAME_RELAY > options NETGRAPH_LMI > .... > device ar > > The dmesg showed that the device ARNET/Digi SYNC/570i was loaded > successfully. However, when I tried to config. with the following, the > ngctl prompt with the error: > > #ngctl mkpeer ar0: frame_relay rawdata downstream > #ngctl mkpeer ar0:rawdata lmi dlci500 ansi ngctl mkpeer ar0:rawdata lmi dlci0 annexD also you need NETGRAPH_RFC1490 ngctl mkpeer ar0:rawdata rfc1490 dlci500 downstream ngctl mkpeer ar0:rawdata.dlci500 iface inet inet and you will get smth like ng0 Best regards, Roman Kurakin > > ngctl: send msg: No such file or directory > > I tried the testing with MCI connection disconnected. How do I set the > line speed to 1536 Kbps? I hope someone could help me how to config. > the netgraph with work with Digi SYNC/570i > > Thanks a lot. > > John Mok > > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?423C72A1.7060000>