Date: Fri, 9 Jan 2004 17:00:36 -0500 (EST) From: jromero@romero3000.com To: freebsd-questions@freebsd.org Subject: poptop funny log messages Message-ID: <29079.64.32.177.146.1073685636.squirrel@mail2.romero3000.com>
next in thread | raw e-mail | index | archive | help
Running PopTop in test server and it seems to be working well, except the logs are replete with error messages like: ------------------------------------- Jan 18 14:19:34 host pptpd[72063]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jan 18 14:19:34 host ppp[72064]: Warning: ff02:7::/32: Change route failed: errno: Network is unreachable Jan 18 14:20:17 host pptpd[72068]: GRE: Discarding duplicate packet Jan 18 14:20:19 host pptpd[72068]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jan 18 14:20:19 host ppp[72069]: Warning: ff02:7::/32: Change route failed: errno: Network is unreachable Jan 18 14:20:19 host ppp[72069]: Warning: ff02:7::/32: Change route failed: errno: Network is unreachable Jan 18 14:23:48 host pptpd[72070]: GRE: Discarding duplicate packet ------------------------------------ here are my config files: bash-2.05b$ cat /etc/ppp/ppp.conf loop: set timeout 0 set log phase chat connect lcp ipcp command set device localhost:pptp set dial set login # Server (local) IP address, Range for Clients, and Netmask # if you want to use NAT use private IP addresses set ifaddr 192.168.1.8 192.168.1.130-192.168.1.160 255.255.255.0 # if you don't want to use NAT then use real IP addresses #set ifaddr 10.0.0.100 10.0.0.200-10.0.0.249 255.255.255.0 set server /tmp/loop "" 0177 loop-in: set timeout 0 set log phase lcp ipcp command allow mode direct pptp: load loop #enable chap disable pap # Authenticate against /etc/passwd enable passwdauth enable proxy accept dns enable MSChapV2 enable mppe disable deflate pred1 deny deflate pred1 # DNS Servers to assign client set dns 192.168.1.7 # NetBIOS/WINS Servers to assign client set nbns 192.168.1.7 set device !/etc/ppp/secure bash-2.05b$ cat /usr/local/etc/pptpd.conf option /etc/ppp/ppp.conf # turn debugging on only if you need it debug # if you have multiple addresses and only want to "listen" on one: # listen 10.0.0.100 # if you do not want to NAT your vpn connections then use real IP's #localip 10.0.0.100 #remoteip 10.0.0.200-249 # if you want to use NAT use private IP's localip 192.168.1.8 remoteip 192.168.1.130-160 pidfile /var/run/pptpd.pid +chapms-v2 mppe-40 mppe-128 mppe-stateless bash-2.05b$ cat /etc/ppp/secure #!/bin/sh exec /usr/sbin/ppp -direct loop-in has anyone encountered this before??? the pptp service is working fine but I would like to know if this is a serious problem.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?29079.64.32.177.146.1073685636.squirrel>