Date: Mon, 12 May 2008 13:17:16 +0900 From: dikshie <dikshie@gmail.com> To: freebsd-stable@freebsd.org Subject: any available patches for sata: "ad4: warning - setfeatures set transfer mode taskqueue timeout - completing request directly" Message-ID: <910e60e80805112117j1ecb83b4s4cdb62eafbdf748f@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi, I got : -------------------------------- ad4: warning - setfeatures set transfer mode taskqueue timeout - completing request directly ad4: warning - setfeatures enable rcache taskqueue timeout - completing request directly ad4: warning - setfeatures enable wcache taskqueue timeout - completing request directly ad4: timeout - flushcache retrying (0 retries left) geom_journal: flush cache of ad4s1d: error=5 ad4: timeout - write_dma retrying (1 retry left) LBA=4139103 ------------------------------- I read: http://wiki.freebsd.org/JeremyChadwick/Commonly_reported_issues and strange output from dmesg: ad4: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata2-master UDMA33 ^^^^^^^^^^^ any available patches ? best regards, -dikshie- -------------------------------- Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #19: Sat May 10 15:41:00 JST 2008 dikshie@dhcp-143-221.sfc.wide.ad.jp:/usr/obj/usr/src/sys/BARU Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2333.34-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 2000646144 (1907 MB) avail memory = 1926553600 (1837 MB) ACPI APIC Table: <Nvidia NVDAACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <Nvidia NVDAACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 7fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 3.1 (no driver attached) pci0: <memory, RAM> at device 3.2 (no driver attached) pci0: <memory, RAM> at device 3.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/11.22, addr 2> on uhub1 atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia> at device 9.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xefdff000-0xefdfffff irq 16 at device 0.0 on pci4 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:e0:4d:66:7a:72 re0: [FILTER] atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 21 at device 16.0 on pci0 acpi_tz0: <Thermal Zone> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Logitech USB Mouse, class 0/0, rev 1.10/6.10, addr 2> on uhub0 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. ad4: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata2-master UDMA33 acd0: DVDR <HL-DT-ST DVDRAM GH20NS10/EL00> at ata3-slave UDMA33 GEOM_JOURNAL: Journal 3398879317: ad4s1d contains data. GEOM_JOURNAL: Journal 3398879317: ad4s1d contains journal. GEOM_JOURNAL: Journal ad4s1d clean. GEOM_JOURNAL: Journal 2420032810: ad4s1e contains data. GEOM_JOURNAL: Journal 2420032810: ad4s1e contains journal. GEOM_JOURNAL: Journal ad4s1e clean. GEOM_JOURNAL: Journal 2035336235: ad4s1f contains data. GEOM_JOURNAL: Journal 2035336235: ad4s1f contains journal. GEOM_JOURNAL: Journal ad4s1f clean. GEOM_JOURNAL: Journal 811662893: ad4s1g contains data. GEOM_JOURNAL: Journal 811662893: ad4s1g contains journal. GEOM_JOURNAL: Journal ad4s1g clean. SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad4s1a -----------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?910e60e80805112117j1ecb83b4s4cdb62eafbdf748f>