Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 May 2011 19:38:51 -0500
From:      Scott Allendorf <scott-allendorf@uiowa.edu>
To:        Dominic Fandrey <kamikaze@bsdforen.de>, freebsd-stable@FreeBSD.org
Subject:   Re: RELENG_8 does not build with CPUTYPE=core2
Message-ID:  <4DCDCF1B.3060300@uiowa.edu>
In-Reply-To: <4DCDAD36.5080007@bsdforen.de>
References:  <4DCDAD36.5080007@bsdforen.de>

next in thread | previous in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
Dominic Fandrey wrote:
> env CCACHE_PREFIX=/usr/local/bin/distcc /usr/local/bin/ccache cc -O2 -pipe -march=core2 -DHAVE_CONFIG_H -I/usr/src/kerberos5/tools/make-roken/../../include -std=gnu99   -c make-roken.c
> /usr/src/kerberos5/tools/make-print-version/../../../crypto/heimdal/lib/vers/make-print-version.c:1: error: bad value (core2) for -march= switch
> /usr/src/kerberos5/tools/make-print-version/../../../crypto/heimdal/lib/vers/make-print-version.c:1: error: bad value (core2) for -mtune= switch
> make-roken.c:1: error: bad value (core2) for -march= switch
> make-roken.c:1: error: bad value (core2) for -mtune= switch
> distcc[44991] ERROR: compile make-roken.c on localhost failed
> *** Error code 1
> 1 error
> *** Error code 2
> distcc[44988] ERROR: compile /usr/src/kerberos5/tools/make-print-version/../../../crypto/heimdal/lib/vers/make-print-version.c on localhost failed
> *** Error code 1
> 1 error
> *** Error code 2
> 2 errors
> *** Error code 2
> 1 error
> *** Error code 2
> 1 error
> *** Error code 2
> 
> # make -VCPUTYPE
> nocona
> # make -VCFLAGS
> -O2 -pipe -march=nocona
> 
> CPUTYPE is set with CPUTYPE?=core2.
> 

I saw this too when updating systems across the compiler update.  As 
near as I can tell, some part of the build is not using the new 
"core2"-aware compiler built as part of the toolchain and is using the 
older, installed version instead.

Commenting out the CPUTYPE definition allowed my buildworlds to complete 
successfully.  After the resulting system was installed I was then able 
to restore CPUTYPE to "core2" and 'make buildworld' would succeed 
(presumably because the base system compiler now understands 
"-march=core2").

Hope this help...

-Scott

-- 
Scott C. Allendorf                     Email:  scott-allendorf@uiowa.edu
Senior Systems Administrator           Office:       216A Van Allen Hall
Department of Physics and Astronomy    Voice:             (319) 335-0003
The University of Iowa                 FAX:               (319) 335-1753
Iowa City, Iowa  52242-1479            ICBM:  41 39 43.6 N  91 31 55.1 W

[-- Attachment #2 --]
0	*H
010	+0	*H
00r'znn0
	*H
0o10	USE10U
AddTrust AB1&0$UAddTrust External TTP Network1"0 UAddTrust External CA Root0
050607080910Z
200530104838Z010	UUS10	UUT10USalt Lake City10U
The USERTRUST Network1!0Uhttp://www.usertrust.com1604U-UTN-USERFirst-Client Authentication and Email0"0
	*H
0
9}A;bF7`u9eJGHjM5BI/|1Nd.)բdąQ5yNh{zɤ2O0nFxoY^/m/묡j.g5yiF͠v:z'[=s"HaLi.1 ,׉CZqYں
gT:
wetbh~GeMW(t40b0,00U#0z4&&T$T0Ug}ĝ&pKPH|=n}0U0U00{Ut0r08642http://crl.comodoca.com/AddTrustExternalCARoot.crl06420http://crl.comodo.net/AddTrustExternalCARoot.crl0
	*H
؉o(~TBk	ĠmאfyCqovE7=YxFz[r-F)Iy<mmhOr6j5PρmUY0JmdI|6i9ZK:
D/p%ZTļms2,雄$-zhP?Mg.;N
&DeMR>k2\Al]Xm=G.̎00hYQ'M}'c0
	*H
010	UUS10	UUT10USalt Lake City10U
The USERTRUST Network1!0Uhttp://www.usertrust.com1604U-UTN-USERFirst-Client Authentication and Email0
110128000000Z
120128235959Z0*1(0&	*H
	scott-allendorf@uiowa.edu0"0
	*H
0
nXϊyϙhm+]ޙލz=?Lc98XM#|%FA53ϸ_te`]B:9R=t	W .(nN/l8N)!~'{,#YRk<epbgt>.vn	MB|ъDzboa{q6`H*p];Qi[\.QOv`ܖx']V\	00U#0g}ĝ&pKPH|=n}0UWRJPomP1գ50U0U00 U%0++10	`HB 0FU ?0=0;+10+0)+https://secure.comodo.net/CPS0U00LJHFhttp://crl.comodoca.com/UTN-USERFirst-ClientAuthenticationandEmail.crl0JHFDhttp://crl.comodo.net/UTN-USERFirst-ClientAuthenticationandEmail.crl0l+`0^06+0*http://crt.comodoca.com/UTNAAAClientCA.crt0$+0http://ocsp.comodoca.com0$U0scott-allendorf@uiowa.edu0
	*H
qŶ& WVEz_AHX`צtm> `'N<?b'D8qhac\ыVT 3pӍ{́\+OydV<63կBcmG5GDZ~39~c):iڿPM.f9%%{*bŭ*]A2ܨ$E㨠Ƴ!q(}UT>'/Q*A00hYQ'M}'c0
	*H
010	UUS10	UUT10USalt Lake City10U
The USERTRUST Network1!0Uhttp://www.usertrust.com1604U-UTN-USERFirst-Client Authentication and Email0
110128000000Z
120128235959Z0*1(0&	*H
	scott-allendorf@uiowa.edu0"0
	*H
0
nXϊyϙhm+]ޙލz=?Lc98XM#|%FA53ϸ_te`]B:9R=t	W .(nN/l8N)!~'{,#YRk<epbgt>.vn	MB|ъDzboa{q6`H*p];Qi[\.QOv`ܖx']V\	00U#0g}ĝ&pKPH|=n}0UWRJPomP1գ50U0U00 U%0++10	`HB 0FU ?0=0;+10+0)+https://secure.comodo.net/CPS0U00LJHFhttp://crl.comodoca.com/UTN-USERFirst-ClientAuthenticationandEmail.crl0JHFDhttp://crl.comodo.net/UTN-USERFirst-ClientAuthenticationandEmail.crl0l+`0^06+0*http://crt.comodoca.com/UTNAAAClientCA.crt0$+0http://ocsp.comodoca.com0$U0scott-allendorf@uiowa.edu0
	*H
qŶ& WVEz_AHX`צtm> `'N<?b'D8qhac\ыVT 3pӍ{́\+OydV<63կBcmG5GDZ~39~c):iڿPM.f9%%{*bŭ*]A2ܨ$E㨠Ƴ!q(}UT>'/Q*A1]0Y0010	UUS10	UUT10USalt Lake City10U
The USERTRUST Network1!0Uhttp://www.usertrust.com1604U-UTN-USERFirst-Client Authentication and EmailYQ'M}'c0	+n0	*H
	1	*H
0	*H
	1
110514003851Z0#	*H
	1:~*ՌuMo0_	*H
	1R0P0	`He0
*H
0*H
0
*H
@0+0
*H
(0	+710010	UUS10	UUT10USalt Lake City10U
The USERTRUST Network1!0Uhttp://www.usertrust.com1604U-UTN-USERFirst-Client Authentication and EmailYQ'M}'c0*H
	1Ơ010	UUS10	UUT10USalt Lake City10U
The USERTRUST Network1!0Uhttp://www.usertrust.com1604U-UTN-USERFirst-Client Authentication and EmailYQ'M}'c0
	*H
Gֺu|Y>姆|tHڗ/q4Q~p9kЇx5[Tn}O?6G;
!.(øޅ~E/?(䶗yﴦ{wN4ZUНWebI-G'bm29HĮ e+((p&:( 
{`AO:Qvhb)bFReC(|4n#ws kp+Y1d<c

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DCDCF1B.3060300>