Date: Fri, 4 May 2001 08:29:08 -0700 (PDT) From: Jamie Bowden <ragnar@sysabend.org> To: Greg Smith <gregsmith59@hotmail.com> Cc: ggm@apnic.net, freebsd-mobile@freebsd.org Subject: Re: DELL Latitude 400 and pccard? (vs.Dell c800) Message-ID: <Pine.BSF.4.10.10105040824080.4490-100000@moo.sysabend.org> In-Reply-To: <F208nkZvLQET7ffSsnu0000072d@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 4 May 2001, Greg Smith wrote: :Jamie, : :This is interesting. Your c800 machine has several PCI devices on IRQ11, :sound on IRQ5, UHCI on IRQ11, and the PCIC on IRQ10. The unkown device on IRQ 11 is the 1394 controller as well. :>pci1: <ATI model 4d46 graphics accelerator> at 0.0 irq 11 : :>pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem :>0xf8ffe000-0xf8ffffff irq 5 at device 3.0 on pci2 :>chip1: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device :>15.0 on pci2 :>chip2: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device :>15.1 on pci2 :>pci2: <unknown card> (vendor=0x104c, dev=0x8027) at 15.2 irq 11 : :>uhci0: <UHCI (generic) USB controller> port 0xdce0-0xdcff irq 11 at device :>31.2 on pci0 : :>pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 irq 10 on isa0 :>pcic0: management irq 10 : :using config: :>device pcm :> :>device pcic0 at isa? irq 10 :>device card :> :>device uhci : : :OTOH, George gets several devices on IRQ10, sound on IRQ10, UHCI on IRQ11 :and the PCIC on IRQ13! (due to FreeBSD pcic limitations): : :pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 10 : :uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 11 :at :device 7.2 on pci0 : :pcm0: <Crystal Semiconductor CS4281> mem :0xfedf0000-0xfedfffff,0xfedef000-0xfed :effff irq 10 at device 8.0 on pci0 :pcic-pci0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0 : :xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xfc00-0xfc7f mem :0xfededc00-0xfededc7f irq 10 at device 13.0 on pci0 : :pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 irq 10 on isa0 :pcic0: management irq 13 : :using config: : :device card :device pcic0 at isa? irq 10 : :device xl : :device uhci : :device pcm : :========================== :It does appear that Dell may have wired the PCI interrupts differently on :these two machines. If PCIC can't share, or operate in polling mode, George :might be out of luck. The C600 is not much different than the C800; the C400 on the other hand appears to be a whole different beast. The differences between the CPx H and the C800 don't seem to be significant either. I'm still using my old 4.2 config from the CPx H. :To verify the pci int pin settings I boot my 4.1-Release machine in verbose :mode. Maybe if Jamie (or anyone with a Dell c800) and George do that we can :shed some more light on this. My laptop is on my desk at home right now. I can access it, but I can't reboot it and tell it to give verbose output from here. I can do so later. Jamie Bowden -- "It was half way to Rivendell when the drugs began to take hold" Hunter S Tolkien "Fear and Loathing in Barad Dur" Iain Bowen <alaric@alaric.org.uk> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10105040824080.4490-100000>