Date: Tue, 20 Mar 2001 09:26:54 -0500 From: Richard J Kuhns <rjk@grauel.com> To: freebsd-stable@freebsd.org Subject: ATAPI CD problem with 4.3-BETA Message-ID: <15031.26798.497131.589152@localhost.grauel.com>
next in thread | raw e-mail | index | archive | help
To summarize: I recently replaced my motherboard/RAM/processor and now my
HP 9350i CD burner doesn't work anymore. I'm sure the drive itself is
still ok -- I took it to the office yesterday and put it in an HP Pavilion
(running FreeBSD 4.2), and it worked just fine.
I went from a Micron PC motherboard that was a couple of years old whose
IDE controllers would only go to UDMA33 to a TYAN Tiger 230.
The 9350 is found by the bios just fine, and I was able to boot the 4.2 cd
from it.
When I boot from the hard drive it seems to be found ok, but an attempt to
mount a cd (in this case, the 4.2 cd I'd booted from earlier) hangs as
follows:
moran:~$ ps axlw|grep cd
0 544 1 0 28 0 204 92 atprq D p3- 0:00.00 cd9660 -o ro -o noauto /dev/acd0c /cdrom (mount_cd9660)
moran:~$
with the following messages repeat at regular intervals:
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
I'm including dmesg output below. If anyone can offer any suggestions I'd
greatly appreciate it. If you need more info just let me know.
I guess I should also mention that I have ATA66 compliant cables on both
IDE controllers, despite the message below.
Thanks...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #3: Tue Mar 20 08:28:09 EST 2001
rjk@moran.grauel.com:/misc/src/sys/compile/MORAN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (933.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 257560576 (251524K bytes)
Preloaded elf kernel "kernel" at 0xc0388000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc038809c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc1f mem 0xd5000000-0xd50fffff,0xd5100000-0xd5100fff irq 11 at device 8.0 on pci0
fxp0: Ethernet address 00:a0:c9:5a:0b:aa
pcm0: <AudioPCI ES1371> port 0xe000-0xe03f irq 5 at device 9.0 on pci0
pci0: <NVidia Riva TNT graphics accelerator> at 11.0 irq 10
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 19531MB <Maxtor 92048U8> [39683/16/63] at ata0-master UDMA33
ad1: 58623MB <Maxtor 96147U8> [119108/16/63] at ata0-slave UDMA66
acd0: CD-RW <Hewlett-Packard CD-Writer Plus 9300> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
acd0: REQUEST_SENSE command timeout - resetting
ata1: resetting devices .. done
acd0: read data overrun 18/0
--
Richard Kuhns rjk@grauel.com
PO Box 6249 Tel: (765)477-6000 \
100 Sawmill Road x319
Lafayette, IN 47903 (800)489-4891 /
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15031.26798.497131.589152>