Date: Wed, 8 Nov 2006 10:07:43 +0100 From: Bruno Ducrot <ducrot@poupinou.org> To: Michael Butler <imb@protected-networks.net> Cc: freebsd-stable@freebsd.org, Ian Smith <smithi@nimnet.asn.au>, Michel Talon <talon@lpthe.jussieu.fr> Subject: Re: Problem with the installer sysinstall. Message-ID: <20061108090743.GH4945@poupinou.org> In-Reply-To: <4550D504.3080300@protected-networks.net> References: <20061102134938.GA64052@lpthe.jussieu.fr> <Pine.BSF.3.96.1061103012515.3812x-100000@gaia.nimnet.asn.au> <20061107180016.GG4945@poupinou.org> <4550D504.3080300@protected-networks.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Nov 07, 2006 at 01:48:36PM -0500, Michael Butler wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Bruno Ducrot wrote: > >> > cpu0: <ACPI CPU> on acpi0 > >> > acpi_perf0: <ACPI CPU Frequency Control> on cpu0 > >> > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > >> > cpu1: <ACPI CPU> on acpi0 > >> > acpi_throttle1: <ACPI CPU Throttling> on cpu1 > >> > acpi_throttle1: failed to attach P_CNT > >> > device_attach: acpi_throttle1 attach returned 6 > > > > Anyway the OP should enable eist and p4tcc (by loading cpufreq on boot) > > and both acpi_perf and acpi_throttle will be gone. > > Adding 'device cpufreq' results in dmesg looking like .. > > acpi0: <TOSINV Capell00> on motherboard > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > acpi0: Power Button (fixed) > acpi_bus_number: can't get _ADR > acpi_bus_number: can't get _ADR > ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler > ACPI-1304: *** Error: Method execution failed > [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST > ACPI-0239: *** Error: Method execution failed > [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST > ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler > ACPI-1304: *** Error: Method execution failed > [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST > ACPI-0239: *** Error: Method execution failed > [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST Strange. Does this happens only when you add cpufreq? Also, could you please add a link (www or ftp) to a file generated by acpidump -d -t > the_model_of_this_computer.asl? > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 Seems to be ok. -- Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061108090743.GH4945>