Date: Fri, 13 Jul 2012 12:02:53 +0600 From: "Eugene M. Zheganin" <emz@norma.perm.ru> To: freebsd-net@freebsd.org Subject: Re: Broadcom NetXtreme BCM5719 support Message-ID: <4FFFBA0D.7080505@norma.perm.ru> In-Reply-To: <CAAAm0r2=_VbmHop7WMmg7UW7u0D%2BJGZn2BO1D7E96BFuGPs=8w@mail.gmail.com> References: <CAAAm0r2=_VbmHop7WMmg7UW7u0D%2BJGZn2BO1D7E96BFuGPs=8w@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi. On 13.07.2012 04:39, Jason Wolfe wrote: > bge0:<Broadcom unknown BCM5719, ASIC rev 0x5719001> mem > 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq > 32 at device 0.0 on pci3 > bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E > miibus0:<MII bus> on bge0 > bge0: Ethernet Address: xx:xx:xx:xx:xx:xx > ... > bge0: watchdog timeout -- resetting > bge0: link state changed to UP > bge0: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > ... > > > bge0@pci:0:3:0:0: class=0x020000 card=0x169d103c chip=0x165714e4 > rev=0x01 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe' > class = network > subclass = ethernet > > Anything in the pipe on this one, or any access I can provide that > might assist us? > I got a BMC5722 chip (and IBM x3250 mX systems), but same stuff with timeout/resets. I can say 8.1/8.2 were more stable concerning bge(4). You could try to switch off tso and vlanhwtso, at least it did the trick for me (did it ? not sure though. I was having problems one a month on 8.1/8.2, after upgrading to 8.3-STABLE I start having problems with it every day, literally, after ifconfig bge0 -tso -vlanhwtso it's running for 5 day now.) Eugene.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FFFBA0D.7080505>