Date: Sat, 6 Apr 2002 23:48:59 +0200 From: Bjarne Wichmann Petersen <freebsd.nospam@mekanix.dk> To: freebsd-questions@freebsd.org Subject: failure mounting a usb-floppy Message-ID: <20020406214914.KVLZ24710.fepD.post.tele.dk@there>
index | next in thread | raw e-mail
Hi!
I'm trying to mount a usb-floppy without much success. It just fails:
# mount_msdos /dev/da0 /mnt/floppy
mount_msdos: /dev/da0: Input/output error
Accorden to dmesg, my usb-floppydrive is recognised, but at the bottom you'll
see some errormessage from the mounting-process.
But the usb-floppy does work with the computer, I made a networkinstall
booting and loading from it.
Anyone got a clue to why it fails to mount?
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Fri Apr 5 18:06:24 CEST 2002
root@samwise.my.domain:/usr/src/sys/compile/SAMWISE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (597.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT
,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
config> di sio1
config> di sio0
config> di ppc0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di bt0
config> di ata1
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 125419520 (122480K bytes)
Preloaded elf kernel "kernel" at 0xc0503000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc050309c.
module_register_init: MOD_LOAD (vesa, c037cbe8, 0) error 6
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1800-0x180f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 11 at
device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01,
addr
2
uhub1: 2 ports with 2 removable, self powered
umass0: TEAC TEAC FD-05PUB , rev 1.00/0.00, addr 3
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at
device
7.3 on pci0
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at
device 8.0 on pci0
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at
device 8.1 on pci0
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1840-0x187f mem
0xf4020000-0xf403ffff,0xf4010000-0xf4010fff irq 11 at device 10.0 on pci0
fxp0: Ethernet address 00:10:a4:89:c6:a3
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x115d, dev=0x000c) at 10.1 irq 11
pcm0: <Crystal Semiconductor CS4281> mem
0xf4000000-0xf400ffff,0xf4012000-0xf4012fff irq 11 at device 11.0 on pci0
pcm0: chip is in D3 power mode -- setting to D0
orm0: <Option ROMs> at iomem
0xc0000-0xccfff,0xcd000-0xce7ff,0xd8000-0xdbfff,0xdc000-0xdcfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled,
default to deny, logging limited to 100 packets/entry by default
ad0: 19077MB <IBM-DJSA-220> [41344/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TEAC FD-05PUB 1026> Removable Direct Access SCSI-0 device
da0: 20KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
logo_saver: no suitable graphics mode
module_register_init: MOD_LOAD (logo_saver, c10c6a58, 0) error 19
umass0: Unsupported UFI command 0x08, 6 byte command should have been
converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status
==
0x0
Bjarne
--
Homepage: http://www.mekanix.dk
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020406214914.KVLZ24710.fepD.post.tele.dk>