Date: Thu, 13 Jul 2023 13:43:45 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 272485] bnxt : broadcom BCM57404 NetXtreme-E no sends mac address to switch port Message-ID: <bug-272485-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D272485 Bug ID: 272485 Summary: bnxt : broadcom BCM57404 NetXtreme-E no sends mac address to switch port Product: Base System Version: 13.1-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: simonyan@info-lan.ru hello, we encountered a problem that Broadcom BCM57404 NetXtreme-E 10Gb/25Gb Ethernet Controller dual port network cards do not send their mac address on the switch port cisco nexus 3064, but there is a link UP the DAC cable. Added if_bnxt_load=3D"YES" to /boot/loader.conf there are no problems in dmesg either. in rc.conf, a static IP address is set on bnxt0 or bnxt1 and, accordingly, = an IP address from this subnet is also raised on the switch port. I tried to insert sfp + 10gb instead of a dac cable, there is a link up, but the network card does not send mac address to the port. I tried it on different switches. I tried to install Intel XXV710-DA2 10/25GbE SFP28 2-Port PCIe Ethernet Ada= pter instead of broadcom network card and everything works fine with intel. broadcom network card has driver and firmware sysctl dev.bnxt.0.ver.hwrm_fw dev.bnxt.0.ver.hwrm_fw: 212.0.162 sysctl dev.bnxt.0.ver.hwrm_if dev.bnxt.0.ver.hwrm_if: 1.9.1 Tell me what is the reason that network broadcom 10/25gb may not send mac address to the switch port, at the same time, the network card settings in rc.conf and switch cisco nexus 3064 switch are correct. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-272485-227>